Availability
Showing In Stock Items. Show All 167 Items.
KYB Gas-a-Just shocks use higher gas pressure to keep your tires glued to the road. The velocity-sensitive valving system adjusts quickly to changing road conditions for maximum comfort in any situation. Their monotube configuration eliminates aeration and foaming, while micro-smooth, hard-chromed pistons extend their life. Seamless cylinders and eye-rings completely eliminate seam failures. These replacement shock absorbers are available for vehicles as far back as the 1940s. Order the model recommended for your application.
( 1064 )
$50.47
—
$52.07
Discover the full potential of your car or truck with Bilstein B6 Performance Series shocks and struts. These suspension components have been developed, tuned, and tested to provide superior control, precise handling, increased traction, and enhanced stability—without sacrificing comfort. Whether you're looking for better street performance or a comfortable ride with off-road and heavy hauling ability, Bilstein has a set of B6 shocks and struts that will do the job.
( 839 )
$97.00
—
$99.00
These Competition Engineering adjustable drag shocks offer a 3-way valving system to dial-in the extension/compression ratio needed for any track condition. The front shocks have three adjustable ratios of 90/10, 80/20, and 60/40. The ratios for the rear shocks are 70/30, 60/40, and 50/50. These numbers represent the percentage of force required to extend (first number) and compress (second number) the shock. By changing the settings on the front and rear shocks, you can dial-in the car to raise the front on initial launch for weight transfer, and then settle smoothly for a final charge to the finish line.
( 242 )
$80.99
—
$84.99
Replace weak-type tie rod sleeves that are prone to failure under performance and racing use with new billet aluminum tie rod sleeves from Proforged. These billet aluminum tie rod sleeves can put the ultimate finishing touch on your front-end rebuild. Featuring machined-out solid 6061-T6 aluminum that's MIL-Spec black anodized, these heavy-duty tie rod sleeves are lightweight and look great. Best of all, Proforged thread-matches their tie rod sleeves to their mating tie rod ends to offer the perfect fit.
( 53 )
$79.95
Proforged E-coated center links ensure that your vehicle alignment settings are retained, as well as provide a long service at a great value. These drag links feature a virtually rust-proof, trick-looking black EDP coating that can stand up to just about anything—plus they have an improved design that will take you anywhere, mile after mile. The links deliver crisp, predictable handling and increased longevity and durability, even in the most demanding conditions. Order the model recommended for your application.
( 40 )
$84.95
—
$99.95
Proforged e-coated idler arms stop steering play and corrosion. These high performance components feature a virtually rustproof black e-coating to provide a longer service life. Plus, they are built to strict tolerances using the latest innovations in steering technology to ensure crisp, predictable handling. There's a better choice for high performance and value--Proforged e-coated idler arms.
( 30 )
$69.95
Want a more positive tie rod adjustment? Install these QA1 heavy-duty tie rod sleeves. They're manufactured from solid steel hex stock, and zinc plated for corrosion resistance. The sleeves included plated hex nuts for easy adjusting and hold them in place when tightened.
( 55 )
$86.95
—
$91.95
Bilstein AK Series shocks and struts let you take full control of your race car. The AK Series feature sealed steel bodies with monotube gas pressure construction for full damping power, even under extreme stress. They provide high-level traction and precise handling, as well as safety for your powerful sport suspension. Pure stock, street stock, or mini-stock Bilstein AK Series shocks and struts have what you need for the best handling, most responsive, and most stable design possible for your application.
( 7 )
$109.00
Proforged E-coated pitman arms offer more for your vehicle. They're not only manufactured to strict tolerances using the latest steering technology, but they also include a virtually rust-proof black EDP coating for added durability! These linkage replacements are lab-tested and real-world proven to ensure crisp, predictable handling and reliability. Proforged pitman arms are available in a variety of configurations for stock height and raised applications.
( 50 )
$99.95
Gabriel Load Carrier shocks are the perfect combination of shock and spring technology to help reduce the loss of ride height in ongoing loaded conditions. These front and rear spring-assist shocks feature a chromed piston rod to inhibit corrosion—as well as ensure proper seal lubrication and provide a more consistent wear surface. Load Carriers also have a leakproof design to help prolong their life. Models are available for hundreds of vehicle-specific applications.
( 229 )
$95.99
—
$111.99
Proforged tall ball joints may be the perfect solution to ridding your ride of negative camber curve issues. Tall ball joints are a hot trend in the aftermarket, and for very good reason. They're designed to correct fundamental deficiencies in the original suspension that causes poor handling. These ball joints from Proforged are designed to increase the effective spindle height, which in turn reverses the camber curve for significant improvement in your vehicle's overall handling. Proforged tall ball joints are built to be stronger than OEM and to help keep tires flat on the pavement for better traction, handling, and cornering. So, stay in control with Proforged!
( 58 )
$59.95
—
$62.95
Energy Suspension offers motor and transmission mount kits for hundreds of vehicle, engine, and drivetrain applications. These replacements are the best of both worlds—smooth running for the street, and strong enough for the track. They're torque- and vibration-resistant, yet comparable in strength to solid metal mounts. The steel brackets are available in zinc and chrome finishes; while the polyurethane bushings deliver far more durability than stock rubber bushing which crack and deteriorate under the intense heat. Better mounts equal better performance. Order the kit recommended for your ride.
( 217 )
$79.00
—
$97.67
QA1 Pro coilover springs fit perfectly with QA1's front Pro Coil Shock Systems. These springs are available with flat or pigtail ends and in 10 or 11 in. free lengths. Made with the highest quality materials, QA1 springs are strong, consistent, and have a long life. Order the style, size, and spring rate options needed for your application. Additional details: * Chrome Silicon steel (CrS) construction for high strength, consistency, and long life * Cold wound, heat-treated, and shot peened to ensure consistency, accuracy, and durability * Silver powdercoated for excellent longevity * High Travel (HT) options have fewer coils and a smaller wire diameter; as a result, they're lighter and have increased travel due to the larger distance between the coils. They reduce unsprung weight and react faster, optimizing suspension performance * Springs are clearly marked with the free length of the spring and spring rate for quick and easy identification * All QA1 springs are lifetime guaranteed to remain within 2 percent of the original free height and rate under normal operating conditions * For Mustang struts or rear Pro Coils, see QA1's 2.5 in. I.D. springs
( 45 )
$98.83
—
$104.95
UMI Performance rear frame notch kits allow for narrowing the rear upper frame rails so you can install wider tires. The precision laser-cut 1/8 in. premium steel follows the frame contour and is intentionally slightly oversized to allow for variances. The pieces are easily welded with a standard MIG welder. End enclosures are included to span from the kit to the original frame. UMI Performance rear frame notch kits require fabrication.
( 6 )
$99.99
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative for replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your one source for remanufactured hard parts. Remanufactured parts may look different from factory parts but perform the same because Cardone products are the highest quality remanufactured parts in the aftermarket. That's because they don't just replace components as needed. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their remanufacturing processes can only be found behind the Cardone name. Additional features include: * The most advanced engineering and remanufacturing processes to provide you with high-technology replacement parts * 100 percent disassembly and component renewal to ensure that you receive reliable products * All new O-rings and lip seals ensure no leaking and long-lasting performance * 100 percent computerized testing for quality and reliability * All critical components are triple-tested to ensure product reliability * 100 percent appearance-inspected to ensure your satisfaction * Rust-inhibitive "Cool Dip" finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake, or peel * Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life
( 340 )
$98.99
—
$222.99
These American Powertrain ISO-X transmission mounts are manufactured from a highly durable ballistic polymer for maximum performance. They are predrilled and fit perfectly on your transmission and crossmember.
( 11 )
$97.99
Summit Racing™ offers drag race shocks and struts for countless vehicles from the 1950s and up. They're available in a variety of styles for front and rear applications—including 90/10, 70/30, and 50/50. A 70/30 strut extends faster than it contracts, meaning faster front-end lift but longer to settle back down. 90/10's will lift your front-end very fast and settle it back down slowly, keeping the weight transferred to the rear tires much longer than the 50/50 models. Order the drag shocks and struts recommended for your racer.
( 11 )
$61.99
—
$62.99
Summit Racing™ polyurethane motor mounts are ideal for street and track use. Made from high-quality performance polyurethane, these mounts and inserts are strong and torque-resistant.
( 111 )
$79.99
Summit Bucks
Use Moog replacement center links as direct-fit parts for your steering systems. Moog replacement center links are manufactured from quality materials for strength and durability.
( 64 )
$71.99
—
$79.99
Summit Bucks
Moog R-Series control arms offer quality design and construction, with pricing for budget-conscious vehicle owners. These control arms also provide ease of installation, and most come pre-assembled with the ball joint and bushings to deliver long-lasting, like-new performance. They're offered in a broad range of applications to meet your needs. If you're seeking a more economical repair solution, Moog R-Series control arms provide the fit and performance you can trust.
( 760 )
$69.99
—
$125.99
QA1 ultimate ball joints feature a patented adjustable design that's strong and extremely wear-resistant. They're available in bolt-in, press-in, and screw-in styles for most popular racing applications. Order the model recommended for your vehicle. Features include: * Ultimate low-friction operation * Infinite preload adjustment allows breakaway torque to be set as low as 0 ft.-lbs. * Completely smooth, bind-free operation * Most wear-resistant design available * Precision tolerance ball-to-race conformity results in even load distribution for unsurpassed wear resistance * Precision-ground 52100 bearing steel race ensures long life and ultra-smooth operation * Steel-reinforced, self-lubricating race * Designed to handle severe impact and high-load applications without sacrificing performance * On-the-car adjustability * Fully greasable, enhanced by self-lubricating components to ensure smooth operation * Various ball studs are available for easy geometry changes * Fine-tune your roll center
( 21 )
$52.71
—
$95.95
Enhance your suspension setup with Allstar Performance metric trailing arms. These adjustable control arms are manufactured from steel and include left and right 3/4 in. rod ends, step spacers reducing to a 1/2 in. hole, and cut-to-fit stock GM-type mounts. The uppers will aid in pinion angle and centering rear-end, while the lowers will modify wheel base.
( 16 )
$84.99
—
$89.99
Global West Suspension control arm shafts are machined from billet steel and are supplied with hardware for the shaft, but not for the frame. The shafts are zinc coated for corrosion protection. Some models are available with an offset to correct misalignment. Control arm shafts are available for a variety of applications from the 1960s, '70s, and '80s.
( 27 )
$71.40
—
$83.85
Summit Bucks
Coil springs play a leading role in your driving comfort and safety. Working together with your shocks, these suspension components provide needed support and stability over bumpy surfaces and around sharp corners. Moog coil springs are some of the finest replacements available when you notice a decline in handling and braking efficiency. They're constructed from high-quality steel and coated with a black, vinyl, or powdercoat finish to resist rust and corrosion. Moog offers hundreds of sizes and styles to fit a full spectrum of cars, trucks, vans, and SUVs--both front and rear.
( 570 )
$75.99
—
$95.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
