Availability
Showing In Stock Items. Show All 57 Items.
Replace weak-type tie rod sleeves that are prone to failure under performance and racing use with new billet aluminum tie rod sleeves from Proforged. These billet aluminum tie rod sleeves can put the ultimate finishing touch on your front-end rebuild. Featuring machined-out solid 6061-T6 aluminum that's MIL-Spec black anodized, these heavy-duty tie rod sleeves are lightweight and look great. Best of all, Proforged thread-matches their tie rod sleeves to their mating tie rod ends to offer the perfect fit.
( 53 )
$78.61
KYB Gas-a-Just shocks use higher gas pressure to keep your tires glued to the road. The velocity-sensitive valving system adjusts quickly to changing road conditions for maximum comfort in any situation. Their monotube configuration eliminates aeration and foaming, while micro-smooth, hard-chromed pistons extend their life. Seamless cylinders and eye-rings completely eliminate seam failures. These replacement shock absorbers are available for vehicles as far back as the 1940s. Order the model recommended for your application.
( 1056 )
$53.04
—
$55.98
Moog R-Series control arms offer quality design and construction, with pricing for budget-conscious vehicle owners. These control arms also provide ease of installation, and most come pre-assembled with the ball joint and bushings to deliver long-lasting, like-new performance. They're offered in a broad range of applications to meet your needs. If you're seeking a more economical repair solution, Moog R-Series control arms provide the fit and performance you can trust.
( 756 )
$53.99
—
$92.99
Gabriel Load Carrier shocks are the perfect combination of shock and spring technology to help reduce the loss of ride height in ongoing loaded conditions. These front and rear spring-assist shocks feature a chromed piston rod to inhibit corrosion—as well as ensure proper seal lubrication and provide a more consistent wear surface. Load Carriers also have a leakproof design to help prolong their life. Models are available for hundreds of vehicle-specific applications.
( 227 )
$107.99
SPC Performance adjustable caster rods can help fine tune your ride's handling performance. Non-adjustable factory rods and their aging bushings cause unwanted movement and poor handling. But, with SPC adjustable rods, you can gain the positive caster needed for improved tracking and modern geometry. Eliminate wandering and weaving at high speeds, put the control back in your hands and enjoy driving a lot more with SPC Performance adjustable caster rods.
( 15 )
$102.99
Whiteline coil spring saddles are a critical service item for any leaf sprung vehicle. High kilometers and heavy load carrying causes excessive wear on the rubber bushings in your coil spring saddle. Restore the rear end of your vehicle to as new condition and appearance with replacement components Whiteline.
( 2 )
$67.26
Two parts of your vehicle that need to be securely mounted are the engine and transmission—never skimp on those areas. Energy Suspension offers dozens of transmission mounts covering thousands of applications. They include steel brackets with a protective zinc plated finish, and polyurethane bushings that are durable enough to handle more horsepower—and soft enough to absorb vibrations. Stock mounts from the factory often include rubber components which succumb to the torque or high performance and racing use. Select the replacement mounts recommended for your vehicle, engine, and automatic or manual transmission.
( 357 )
$53.33
—
$57.97
Prothane transmission mounts take the sloppiness out of your original rubber-mounted drivetrain. They're designed to control torque, eliminate breakage, and retain their shape. These mounts incorporate a metal run-safe interlock feature, increasing strength and durability of each unit. Don't take unnecessary chances with your vehicle's drivetrain; install Prothane transmission mounts, available in a variety of styles for fitment on specific vehicle applications.
( 168 )
$65.23
These Dorman control arms were developed to meet the rigorous demands of today's passenger cars, pickups, and SUVs. They use new technology designed for smooth, responsive steering. Replace your worn control arms with direct fit parts from Dorman.
( 275 )
$51.99
—
$102.99
MustangSteve steering column support bearings are designed to greatly improve steering smoothness and control over factory plastic bushing. If you are installing a rack and pinion or Borgeson power steering conversion, or any other steering modification where a bearing is needed to support the lower end of the steering column shaft, this part is exacting what you need! These steering column support bearings are one-piece steel construction and are available in diameter sizes to fit 1964 1/2 to 1973 Ford Mustang, Falcon, Ranchero, Comet, Fairlane, Maverick models and other vehicles.
( 2 )
$91.99
—
$93.99
Monroe OESpectrum shocks and struts provide unprecedented handling precision and control, while removing the ride harshness that's common with many foreign applications. Their unique blend of comfort and control is due to Tenneco's "Twin Technology Active Control System." This exclusive internal damping control technology consists of an impact control valve (ICV) that delivers exceptional control in all driving conditions, together with a patented, low-speed tenability piston design to isolate impact-related noise, vibration, and harshness. Additional features include: * All-weather fluid with special modifiers to reduce friction and ensure smooth rod reaction * Rod displaced valving, specifically tuned for each application, adjusts to road extremes to provide consistency and ride comfort * Fluon banded piston provides consistent sealing between the piston and pressure tube, which delivers better control and increased durability * Hardened chrome plated piston rod for long service life * Nitrogen gas charged for improved ride and handling; helps maintain tire-to-road contact by reducing aeration * Unique rod guide and single lip seal provide longer service life and consistent performance
( 184 )
$52.99
These Competition Engineering adjustable drag shocks offer a 3-way valving system to dial-in the extension/compression ratio needed for any track condition. The front shocks have three adjustable ratios of 90/10, 80/20, and 60/40. The ratios for the rear shocks are 70/30, 60/40, and 50/50. These numbers represent the percentage of force required to extend (first number) and compress (second number) the shock. By changing the settings on the front and rear shocks, you can dial-in the car to raise the front on initial launch for weight transfer, and then settle smoothly for a final charge to the finish line.
( 239 )
$75.99
These replacement control arms will not break the bank! These Scott Drake reproduction control arms are all-new, not rebuilt units. Scott Drake manufactures these control arms from quality materials, ensuring a good fit. Additional features include the following: * Shaft * Bushings * Riveted ball joints * Nut with cotter key * 90 degree Zerk fittings * Washers and locking nuts
( 35 )
$89.19
Moog replacement tie rod ends are designed as OE replacements for your stock units. Moog replacement tie rod ends feature durable, all-metal construction that is not prone to failure like OE plastic tie rod ends. Since Moog replacement tie rod ends are greasable (except where noted), friction is reduced and contaminants are flushed out. Plus, they have an easy-access wrench flat that allows for the use of a socket for easy installation.
( 796 )
$64.99
Discover the full potential of your car or truck with Bilstein B6 Performance Series shocks and struts. These suspension components have been developed, tuned, and tested to provide superior control, precise handling, increased traction, and enhanced stability—without sacrificing comfort. Whether you're looking for better street performance or a comfortable ride with off-road and heavy hauling ability, Bilstein has a set of B6 shocks and struts that will do the job.
( 827 )
$109.00
When it comes time to update your vehicle's tie rods, make the fix easy and quick with Classic Performance Billet tie rod adjusting sleeves. These hexagonal aluminum pieces are lighter and easier to adjust than their stamped steel cousins. They leave no crevices for water to get into, and their locking jam nuts are easily tightened. Classic Performance Billet tie rod adjusting sleeves make it easy to get lengths right.
( 8 )
$68.99
Scott Drake idler arm brackets are cast iron replacements for factory V8 cars, and they include washer and nut for installation. Quality steering linkage is important on every vehicle. Trust Scott Drake for OE-style reproductions to update your classic car.
( 2 )
$63.05
Lakewood muscle motor mounts offer the advantages of stamped steel motor mounts, without the typical noise and vibration associated with solid mounts. The heavy-gauge steel frame and engine brackets are vulcanized to a hard durometer rubber and feature a safety interlock design where applicable, eliminating the need for torque straps or cables. Muscle mounts are ideal for replacing old, soft, or broken OEM mounts that are a leading cause of clutch chatter.
( 26 )
$65.95
Moog has a problem-solving heritage. Their focus has always been on improving OE products, designing easy-to-install parts, and developing leading-edge technology. Moog ball joints are no exception, helping to restore your chassis to like-new condition. Performance and durability are traits required to reach the winner's circle, and Moog offers these top-quality steering linkage components for hundreds of applications--front, rear, upper, and lower. Choose the ball joints that match your drivetrain and make/model.
( 1064 )
$64.99
Proforged ball joints are tested in the real world so you won't be. You can rely on the quality of Proforged ball joints to withstand the rigors of your day-to-day driving—no matter where you go! They feature an improved design to increase longevity and durability, which also makes them a better value. Quality materials and diligent testing yield components that deliver the performance that you need at a price that you want. Replace your worn ball joints with better-built Proforged parts, available for hundreds of vehicle applications.
( 48 )
$56.85
Improve the steering feel and eliminate the flex of the factory tie rod sleeves with this pair of Hotchkis Sport Suspension tie rod sleeves.
( 34 )
$99.99
Scott Drake idler arms are cast iron replacements that include bushings and hardware. These high-quality reproductions will service your classic with years of trouble-free driving. They're available for vehicles with manual or factory-equipped power steering. Restore the support for your steering linkage with Scott Drake idler arms.
( 3 )
$86.85
Moog replacement idler arms are direct-fit replacement parts for your steering system. They are manufactured from quality materials for strength and durability.
( 275 )
$79.99
Whether you're replacing tie rods or updating rusty equipment, Classic Performance OE tie rod adjusting sleeves will make getting the correct lengths easier. These OE stamped units have end clamps for ease of tightening and are designed for excellent fitment.
Not Yet Reviewed
$68.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
