Availability
Showing In Stock Items. Show All 41 Items.
Air Lift Load Controller II systems not only give you everything you need to install air springs on your ride, but you also give you Air Lift's low-pressure sensor. If the air pressure in your springs drops below 5 or 10 psi, the sensor will detect the drop, and kick the compressor on--automatically. You can watch it happen on the dash-mounted pressure gauge. The kits also have an onboard air compressor, air lines that will inflate or deflate at the touch of a button, plus all wiring, hardware, and installation instructions. They're recommended for trucks, vans, and SUVs.
( 24 )
$228.99
Put your air suspension together your way with some help from Firestone. These heavy duty air compressors are ideal for custom systems.
( 8 )
$191.96
Firestone height control valves are the best of their kind. Firestone is the company behind the world's number-one air springs. For more than 70 years, Firestone has been making the world's top-selling air springs for heavy-duty trucks, trailers, cars, buses, and SUVs. If you're looking for height control valves, Firestone has what you need.
( 1 )
$221.18
No matter what you drive, Air Lift 1000 Load Assist rear spring kits can solve your suspension problems. These air springs are inflatable air cylinders made from tough polyurethane material and fit inside your coil springs to add up to 1,000 lbs. of leveling capacity. Each cylinder has an inflation valve, so you can vary the air pressure to level your vehicle and compensate for uneven loads. Load Assists reduce roll, sway, and bottoming out—and they're available for most cars, trucks, and minivans with open coil springs. They come complete with air lines, fittings, brackets, and mounting hardware. Order the kit recommended for your vehicle.
( 284 )
$126.99
KYB Strut-Plus assemblies are engineered to restore your vehicle's original ride, handling, and control capabilities. Pre-assembled as single units from KYB, these direct replacements are easier and faster to install than traditional struts. The assemblies include a strut, coil spring, upper and lower spring isolators, boot kit, upper spring seat, and new bearing plate. Order the KYB Strut-Plus assemblies designed for your application.
( 173 )
$202.65
—
$220.63
Monroe Quick-Struts include all of the components required for strut replacement in a single, fully assembled unit. Most kits, where applicable, feature a pre-assembled replacement bearing plate, upper and lower spring isolators, an upper spring seat, a coil spring, a boot kit, and a premium Monroe Sensa-Trac strut. This breakthrough design saves on installation time by eliminating the need to disassemble components and compress the coil spring prior to installation. All Monroe Quick-Struts feature application-engineered valving to optimize each vehicle's unique ride and handling characteristics. Replace your entire strut assembly with one of these Monroe Quick-Struts.
( 188 )
$129.99
—
$214.99
Beck/Arnley control arms are developed to meet the rigorous demands of today's vehicles. Made from quality materials, their control arms are built to exacting specifications to fit your application without any modifications. Broken control arms can make handling your car dangerous. Replace worn control arms with direct fit parts from Beck/Arnley--OE form, fit, and function you can rely on.
( 5 )
$101.99
—
$151.99
These Dorman control arms were developed to meet the rigorous demands of today's passenger cars, pickups, and SUVs. They use new technology designed for smooth, responsive steering. Replace your worn control arms with direct fit parts from Dorman.
( 275 )
$102.99
—
$241.99
Old Man Emu lift coil springs are available in a range of designs for each vehicle, enabling the installer to match the most appropriate springs to the intended application. While ride height increases are attained, emphasis is placed on ride control improvements. Further fine tuning is achieved when the springs are matched to a corresponding set of Old Man Emu shock absorbers, delivering a fully integrated system designed specifically to suit your vehicle. Combine your fully loaded vehicle with punishing off-road conditions, and the limitations of standard springs soon becomes apparent. Choose Old Man Emu lift coil springs; they won't let you down. Features include: * Springs are formed on precision mandrels * Scragging before and after shot peening to prevent sagging * Constant and variable rate coils available for multiple applications * Coil spring end configurations designed to exact specifications guaranteeing perfect fitment to your vehicle * Durable powdercoat finish
( 30 )
$224.95
Replace your worn-out shocks and struts with affordable Sachs Stock Replacement parts. These components are built to OEM specifications to offer the same fit, form, and function as the factory component, which means a safer, more comfortable, and contemporary drive. All Sachs shock and strut replacement components are designed to provide superior ride quality and dependability to help you restore your vehicle back to its proper operation. Select the replacement shocks and struts for your application.
( 7 )
$113.99
Unity Automotive complete strut assemblies include all the components required for a strut replacement in a single, fully-assembled unit. All the parts feature OE design, and they're pre-assembled—a breakthrough that saves on installation time by eliminating the safety hazards associated with coil spring decompression. Every assembly features application-engineered valves to optimize each vehicle's unique ride and handling characteristics. Exceed your original equipment standards with the Unity Automotive complete strut assembly designed to fit your application.
( 46 )
$101.99
—
$220.98
Cardone remanufactured power steering pumps are among the highest quality remanufactured parts in the aftermarket. That's because they don't just replace components as needed. Through reverse engineering, their technicians pinpoint original equipment design weaknesses by examining failed cores. You'll benefit from the Cardone expertise when you order the remanufactured power steering pump designed to fit your application. Features include: * All critical components are triple-tested to ensure reliability * All units are built with 100 percent new O-rings and premium-grade Viton® seals to prevent leaks and avoid high-temperature breakdown * Every pump is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort, and noise * Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life * Units are supplied with 100 percent tested and calibrated pressure relief valves * Cardone remanufactured parts are business and environmentally friendly
( 142 )
$160.99
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. Cardone remanufactured rack and pinion units feature all new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance. The racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life. All new O-rings and lip seals ensure no leaking and long-lasting performance. and all units are 100 percent computerized hydraulic tested for proper flow, leakage, and performance.
( 84 )
$229.99
—
$376.99
Cardone engineers have meticulously designed and tested their new power steering pumps to fit and perform like the original. Building on decades of experience, each unit is supplied with premium high-temperature seals and reservoirs for easy installation and reliability you can count on. Build it better; order the Cardone new power steering pump designed to fit your application. Features and benefits: * 100 percent computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle * Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration * Units are supplied with reservoir and cap (when applicable) to reduce installation time and prevent contamination from trapped debris
( 116 )
$169.99
—
$201.99
Dorman Premium Chassis control arms are precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles. With durable construction and manufactured to strict standards, they are direct replacements for specific vehicles offering a reliable fit and performance just like the originals they are replacing.
( 6 )
$101.99
—
$214.99
On Sale
Buick, Chevy, Chrysler, or Dodge—whatever type of vehicle you drive, Summit Racing™ has just the right suspension components, including these loaded strut assemblies. They're application-engineered to your vehicle's unique riding and handling characteristics for better suspension performance. Hundreds of models are available, for fitment on vehicles from the 1980s and up. Summit Racing™ loaded strut assembly features: * Twin-tube, nitrogen-charged design for better performance * Consistent robotic TIG welds * High-range -45 to +450 degree grease applied to all bearings * Strut rod nuts are torqued to OE specs and retain the OE spring compression * Phosphate finished and painted for corrosion resistance * Chrome plated pistons for added life * Neoprene strut boots included * Rubber seat and bumper meet or exceed OEM specifications * High-quality NOK seals * Every unit is put through a 300,000-cycle durability test
( 272 )
$112.99
$101.69
—
$113.99
Beck/Arnley engine mounts are OE replacements you can count on to fit. Made from quality materials, they effectively dampen vibration and noise. The mounts are available in numerous configurations for specific vehicle and engine applications.
( 16 )
$113.99
Lares new (not remanufactured) power steering pumps are engineered to OE specifications to ensure proper fit, form, and function. They're manufactured from the same high-quality materials as your original components to provide long-lasting performance. Over a hundred models are available, with or without an included reservoir, for vehicle and engine applications from 1960 and up. Order the replacement pump recommended for your ride.
( 129 )
$114.99
—
$125.99
Monroe OESpectrum shocks and struts provide unprecedented handling precision and control, while removing the ride harshness that's common with many foreign applications. Their unique blend of comfort and control is due to Tenneco's "Twin Technology Active Control System." This exclusive internal damping control technology consists of an impact control valve (ICV) that delivers exceptional control in all driving conditions, together with a patented, low-speed tenability piston design to isolate impact-related noise, vibration, and harshness. Additional features include: * All-weather fluid with special modifiers to reduce friction and ensure smooth rod reaction * Rod displaced valving, specifically tuned for each application, adjusts to road extremes to provide consistency and ride comfort * Fluon banded piston provides consistent sealing between the piston and pressure tube, which delivers better control and increased durability * Hardened chrome plated piston rod for long service life * Nitrogen gas charged for improved ride and handling; helps maintain tire-to-road contact by reducing aeration * Unique rod guide and single lip seal provide longer service life and consistent performance
( 184 )
$112.99
Summit Bucks
Replace worn suspension parts to improve safety and ride comfort. Delphi control arms utilize robotic welding for consistent performance and quality. Build from materials such as steel and cast iron, the arms are available in a variety of styles—including stock, stamped, and forged. Anti-corrosion protection is applied to each part to ensure longevity. Rubber or rubber/steel bushings are included with most models. Order the OE-type replacement specified for your vehicle application.
( 11 )
$104.99
—
$137.99
Edelmann rack and pinion seal kits contain seals, O-rings, rack bushings, and the hardware parts specific to repair the system. Edelmann has a proven history dealing with OE-style rack and pinion systems in cars, trucks, vans, and SUVs. These premium-quality replacement parts are available for numerous makes and models as far back as the 1970s and forward.
( 4 )
$103.99
KYB Excel-G gas shocks and struts restore original handling and control capabilities. These nitrogen, gas-charged, twin-tube designs have earned an OEA (Original Equipment for the Aftermarket) classification, and KYB offers a huge selection of Excel-G gas shocks to service or upgrade thousands of popular cars, trucks, SUVs, and CUVs applications. Comfort is important, but ride control, as well as stability, stopping, and lane change responsiveness is critical. KYB Excel-G shocks and struts are designed to cover all these performance purposes. Features and benefits: * Vehicle specific, hand assembled in-house damping valves * Ultra-smooth triple chrome plated chrome piston rods reduce seal wear * Multi-lip, synthetic oil seal and wiper engineered to keep fluid in and contaminants out * Seamless, extruded steel tubing in the inner cylinders, and PTFE band around the piston for a positive seal * Restores designed stability * ESC (Electronic Stability Control) and electronic safety systems ready * Helps prolong tire life * Improves stopping distance * Helps maintain wheel alignment
( 793 )
$113.78
—
$119.51
KYB Gas-a-Just shocks use higher gas pressure to keep your tires glued to the road. The velocity-sensitive valving system adjusts quickly to changing road conditions for maximum comfort in any situation. Their monotube configuration eliminates aeration and foaming, while micro-smooth, hard-chromed pistons extend their life. Seamless cylinders and eye-rings completely eliminate seam failures. These replacement shock absorbers are available for vehicles as far back as the 1940s. Order the model recommended for your application.
( 1056 )
$102.88
Modal Header