Availability
Showing In Stock Items. Show All 16 Items.
PSC Big Bore XD steering gears are direct replacements for your inadequate steering gear. They feature larger piston diameters, which increase the torque output of the steering gear—allowing your rig to overcome steering issues due to larger tires and/or locking differentials that you've installed. PSC Big Bore XD units are assembled using all new components and featuring their exclusive new gear housing--not reworked core housings, but 100 percent new cast and machined housings. PSC also offers cylinder-assist versions for vehicles that have 38 in. and bigger tires and larger drivelines. Order the steering gears designed for fitment with your make and model.
( 25 )
$1,050.00
—
$1,449.54
PSC power steering pump kits are engineered specifically to power cylinder assist systems, providing the required pressure and flow of power steering fluid. Includes: * Remote reservoir * 4 qts. of SWEPCO 715 Power Steering Fluid * Fluid cooler * SR-VT fluid anti-splash valve * Pulley * Bracketry * Hardware * Fittings, and pre-assembled hoses
Not Yet Reviewed
$1,165.00
—
$1,594.45
PSC Jeep JL/JT Cylinder Assist EHPS XDR steering gearboxes are designed and built with premium materials to deliver high-quality performance for your Jeep's EHPS system. They will ensure superior handling and performance, durability, and reliability on the road or off.
Not Yet Reviewed
$1,375.00
—
$1,450.00
TeraFlex HD tie rod and drag link kits are built for punishment. Extreme conditions that normally would cause your factory steering components to bend and fail are where these kits will survive. They are designed and engineered to be strong and durable to take you through the terrain, over the rocks, and back home. Outfit your rig with TeraFlex HD tie rod and drag link kits. TeraFlex kits feature: * HD tie rod is 1.6 in. O.D. 4140 heat-treated chromoly * Forged tie rod end housing designed * Allows proper clearance for use with factory 17 in. wheels * Tie rod end joint incorporates same features found in TeraFlex ball joints, including 4140 chromoly ball/stud and 1045 carbon steel housing * Adjustable preload tension to ensure proper long-term durability * Includes the clamp or the TeraFlex steering stabilizer relocation kit * The joint is pressed into the rod end housing and secured with a snap ring. When oriented in the tie rod configuration, the joint offers a total of 14 degrees of movement to minimize tie rod roll, but will still allow maximum turning. * 1.25 in. O.D. fully forged drag link eliminates excess movement during hard steering maneuvers * Oversized DOM factory-style adjusting collar and pinch clamp for simple adjustments
( 4 )
$1,009.99
Rock Crawlers, Ultra 4 Racers, and Rock Racers all need extra help turning locked axles with large tires over rocks and other wild terrain. PSC full hydraulic steering systems turn up to 44 in. tall tires as smooth as glass. They feature new hydraulic cylinders, orbital control valves, and full hydraulic hose kits. Most of the included steering stub collars and brackets require welding. These quick ratio systems change valving and should be used sparingly on paved roads. PSC full hydraulic steering systems are designed to ease arm-strong issues on full time off-road machines.
( 7 )
$1,188.98
—
$1,249.95
Not getting a response? PSC replacement steering boxes will respond appropriately to restore handling to what it was meant to be. These gearboxes offer the right fit and performance so that your steering input effort results in the corresponding wheel output. Retain your stock performance with PSC replacement steering boxes. Order the model designed for fitment with your vehicle.
( 1 )
$1,350.00
For those who want a bolt-in, no modification required, heavy-duty steering system for many Jeep Wranglers and Gladiators (2007 and up), Steer Smarts has the solution for you. This one-click kit includes a Yeti XD tie rod, bottom mount drag link, and 1 5/8 in. aluminum damper bracket. You can round out the front-end trifecta by adding Steer Smarts' Yeti XD front adjustable track bar for the ultimate front-end setup. * Note: Not compatible with stock JK or Super Duty Dana 60 axles. Only with upgraded aftermarket DANA Ultimate Dana 60 axle Product features: YETI XD TIE ROD + DRAG LINK ASSEMBLIES: * Easy bolt-on installation * Engineered for proper clearance to other chassis components to eliminate interferences BALL JOINTS: * 30mm 1 1/2 ton ball joints are designed specifically for the JK with a UD60 (68.5 in. wide) * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme-duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel on steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure ball joints' life is long-lived. These superior seals have been rigorously tested to minimize leakage between grease service intervals which significantly improves ball joint reliability over the competition * Fully greaseable TIE ROD + DRAG LINK ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology on the passenger-side ends prevents linkage from unwanted flopping/rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages ADJUSTER TUBES: * Tie rod and drag link adjusters are manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tube are also E-coated for long-term serviceability * Yeti XD tie rod and drag link fit all left-hand drive JK Wrangler models 2007-2018 equipped with a Dana UD60 (68.5 in. wide)
Not Yet Reviewed
$1,035.00
—
$1,045.00
PSC power steering pumps greatly benefitting rock crawlers running low rpm's. These pumps are used in conjunction with cylinders and hydraulic-assist setups. With modifications, these pumps will work with full hydraulic steering. Whether interested in one piece or the entire kit, PSC power steering pumps will turn your tires, making for fun 4-wheeling. Order the universal or vehicle-specific model recommended for your application.
( 55 )
$1,105.00
Manufacturer Rebate
Artec Industries Super Duty aluminum crossover steering kits are premium front axle kits for your Jeep offering the ultimate steering solution for your Super Duty axle swap. Kits start with Artec's 1.75 in. O.D. aerospace-grade 7075 aluminum rods mated with premium tie rod ends that are designed after those in the Ford F-450s--beefy and longest lasting. The tie rod and drag link ends are offset to account for the short arms on the Super Duty knuckles that provide a great steering feel and no contact with the differential. These are coupled with stainless steel spacers and adapters to allow a perfect fit to your new axle. Each link is threaded with both right-hand and left-hand threads at opposite ends making it easier to adjust the length alignment. Artec included wrench flats on each end of the aluminum link so you can easily tighten your jam nuts without marring the aluminum. Artec Industries Super Duty swap steering kits are available for Jeep JL/JT or the JK with the only difference being the drag link at the end of the pitman arm. Contents: * RH and LH tie rod ends 1.25 in. thread * RH drag link end 1.25 in. thread (pitman arm side, JL or JK taper) * LH drag link End 1.25 in. thread (knuckle side) * RH and LH 1.25 in., 12 TPI jam nuts * 1.75 in. O.D. 7075 T-6 aluminum tie rod bar and drag link bar * Stainless steel spacers/washers to adapt to the Super Duty knuckles and high-steer arm
Not Yet Reviewed
$1,396.99
PSC electric power steering pump kits feature direct-fit design and plug-and-play connectors for easy replacement of your factory original. You also get the exclusive PSC cylinder-assist mapping and increased PSI output (application-dependent) for improved steering feel. The fluid cooling system contains internal and external cooling fins, and the included lines feature billet fittings. The high performance fluid is low-viscosity, with a broad temperature range that can be used for both electric and conventional pumps. Whether you've got a daily driver or prefer challenging off-road venues, PSC electric power steering pump kits will help keep the good times rolling! Other features and specifications include: * Billet return fitting as improvement over plastic factory fitting * Low-profile heat sink fluid cooling system * PSC high-performance electric power steering fluid
Not Yet Reviewed
$1,595.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
