Availability
Showing In Stock Items. Show All 39 Items.
Lares new (not remanufactured) power steering pumps are engineered to OE specifications to ensure proper fit, form, and function. They're manufactured from the same high-quality materials as your original components to provide long-lasting performance. Over a hundred models are available, with or without an included reservoir, for vehicle and engine applications from 1960 and up. Order the replacement pump recommended for your ride.
( 134 )
$129.99
—
$170.99
Air Lift Load Controller II systems not only give you everything you need to install air springs on your ride, but you also give you Air Lift's low-pressure sensor. If the air pressure in your springs drops below 5 or 10 psi, the sensor will detect the drop, and kick the compressor on--automatically. You can watch it happen on the dash-mounted pressure gauge. The kits also have an onboard air compressor, air lines that will inflate or deflate at the touch of a button, plus all wiring, hardware, and installation instructions. They're recommended for trucks, vans, and SUVs.
( 24 )
$244.99
Summit Bucks
These Moog cargo control coil springs are designed as a direct fit for your vehicle. They are made from high-quality steel and are painted black for durability. These springs are ideal upgrades for vehicles that carry heavy loads. They are variable rate springs that change resistance as they compress, and they become progressively stiffer as the load increases. These cargo coil springs automatically adjust to changing load conditions to maintain proper chassis height and smooth ride characteristics.
( 272 )
$113.99
—
$117.99
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative for replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your one source for remanufactured hard parts. Remanufactured parts may look different from factory parts but perform the same because Cardone products are the highest quality remanufactured parts in the aftermarket. That's because they don't just replace components as needed. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their remanufacturing processes can only be found behind the Cardone name. Additional features include: * The most advanced engineering and remanufacturing processes to provide you with high-technology replacement parts * 100 percent disassembly and component renewal to ensure that you receive reliable products * All new O-rings and lip seals ensure no leaking and long-lasting performance * 100 percent computerized testing for quality and reliability * All critical components are triple-tested to ensure product reliability * 100 percent appearance-inspected to ensure your satisfaction * Rust-inhibitive "Cool Dip" finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake, or peel * Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life
( 340 )
$232.99
Gabriel HiJackers air shocks are the original air-adjustable shocks designed to provide customizable performance and support. They can be adjusted and readjusted to maintain proper ride height—and handle any of your temporary towing or hauling needs, including boats and campers. Hijackers feature chrome plated piston rod construction and deluxe wiper seals that provide optimum sealing. Dozens of models are available, covering thousands of applications.
( 608 )
$140.99
—
$151.99
Lares remanufactured steering gears make the perfect replacement for your original equipment needs. These power steering gears are thoroughly cleaned and all exterior surfaces get reconditioned for a fresh like-new appearance. All units receive new OE-equivalent seals and O-rings, then each unit is tested to ensure proper performance. Lares also lubricates each steering gear unit, and applies a fresh coat of high-quality paint, so they come ready to install them and go! Verify the fitment and order the Lares remanufactured steering gear unit designed to fit your application.
( 58 )
$127.99
—
$264.99
Bilstein B8 5100 Series steering stabilizers feature a monotube design for cooler, more efficient operation and longer life. They have the largest available piston diameter, providing superior handling and performance. Their patented digressive valving instantly reacts to changing surface conditions for maximum comfort and control--on and off the road.
( 263 )
$120.99
These EZ-990 helper spring kits from Hellwig can be easily adjusted to meet your changing needs. These springs are hot-formed and heat-treated for strength and durability, and help to provide a safer, level ride. Made with high-quality alloy spring steel, they're designed to end that rear-end sag. Their 2,000 lb. level load capacity is ideal for medium loads, giving you more control through level load management. They're easy to install and mount to your factory axle U-bolt plates without any hard-to-install compressors or air bags to fail.
( 128 )
$171.73
—
$250.79
Summit Bucks
From one to nine, it's your ride your way with Rancho RS9000XL shock absorbers and struts! Rancho offers an exclusive nine levels of performance for your stock or lifted off-road rig. Extra-large bodies with a liquid metallic finish, nitrogen gas-charged, large Nitro Carb rod, polyurethane bushings, and protective boots create this line of advanced RS9000XLs. Together with Rancho technology, these upgrade/replacements deliver optimized performance, looks, and durability. Tune your vehicle for the best obtainable smooth road ride, off-road performance, towing or hauling capabilities—it's all about you with Rancho RS9000XL shocks. Select the model designed to fit your application.
( 193 )
$106.99
Hellwig helper spring mounting kits are designed to mount the helper spring onto the vehicle. They include new brackets for the helper spring and the correct length U-bolts to attach to the leaf spring. These kits are available for both 2.5 in. and 3 in. wide leaf spring applications.
( 18 )
$174.15
—
$178.90
Two parts of your vehicle that need to be securely mounted are the engine and transmission—never skimp on those areas. Energy Suspension offers dozens of transmission mounts covering thousands of applications. They include steel brackets with a protective zinc plated finish, and polyurethane bushings that are durable enough to handle more horsepower—and soft enough to absorb vibrations. Stock mounts from the factory often include rubber components which succumb to the torque or high performance and racing use. Select the replacement mounts recommended for your vehicle, engine, and automatic or manual transmission.
( 358 )
$113.01
Firestone Coil-Rite air helper springs mount inside the coils of an existing coil-spring suspension to give your vehicle a boost when it needs it the most. They're constructed from durable polyurethane and allow for adjustable spring rates that are far superior to those of standard coil springs. Installing these helpers will enable your suspension to support an additional 500 to 1,000 lbs. per set. Installation does not require drilling. Order the kit recommended for your application.
( 58 )
$155.84
These patented SPC Performance thrust alignment plate kits allow for corrections of the setback and thrust angle on most vehicles equipped with leaf springs. They install easily--just loosen up the U-bolt holding the leaf springs to the axle, install the alignment plates, and re-tighten. By including multiple sizes, the SPC Performance thrust alignment plate kits are sure to solve your problem.
( 7 )
$111.99
Monroe load-adjusting shock absorbers provide superior comfort for everyday driving and adjust rapidly to changing road and weight conditions. These units include a heavy-gauge calibrated spring for extra control and comfort when hauling or towing. A new pair of Monroe load-adjusting shock absorbers can assist in maintaining ride height with up to 1,100 lbs. of additional weight (capacity limited by each vehicle's suspension, tires, and transmission). They are ideal for light trucks that carry varying loads or tow trailers. Features of Monroe load-adjusting shock absorbers include: * All-weather fluid containing special modifiers to reduce friction and ensure smooth rod reaction * Full-displaced valving is specifically tuned for each application; automatically adjusts for comfort and consistency * Fluon banded piston for consistent sealing with the pressure tube, improved control, and greater durability * Nitrocarburized rod provides long service life * Nitrogen gas-charged design improves ride and handling--helps maintain tire-to-road contact by reducing aeration * Self-lubricating fluid seal designed to retain gas while preventing excessive wear and friction * Innovative valving results in greater control with improved ride comfort
( 148 )
$151.99
—
$164.99
Firestone height control valves are the best of their kind. Firestone is the company behind the world's number-one air springs. For more than 70 years, Firestone has been making the world's top-selling air springs for heavy-duty trucks, trailers, cars, buses, and SUVs. If you're looking for height control valves, Firestone has what you need.
( 1 )
$221.18
Springs wear out, leaving you with a poor ride. Replace your old, worn springs with these TRW coil springs. These OEM replacements will help you regain your stock ride height and original performance. Available for a number of applications, TRW coil springs maintain the comfortable ride and great handling that you expect from your vehicle.
( 7 )
$123.99
—
$148.99
These Monroe Magnum steering stabilizers are designed to help stop vibration before it gets to the driver at the steering wheel. They will increase control under all driving conditions by reducing steering shimmy. The stabilizers are ideally suited to trucks, vans, and 4WD vehicles.
( 40 )
$159.99
Timbren Suspension Enhancement Systems resolve your suspension problems. Timbren SES kits will improve your load-handling, make it easier to haul heavy loads, and eliminate sag and sway. They're easy to install and maintain! Simply bolt on the kit—no drilling, no air lines to route—and you're ready to roll with high performance and peace of mind. The patented Aeon hollow rubber springs cushion and absorb road shocks and automatically adjust to uneven loads and road conditions. You'll enjoy improved roll stability and reduced sway, unlike with the mediocre trailer suspensions and softer ride quality of today's trucks and trailers. Your truck, van, and SUV are designed for best performance under ideal road and load conditions—but in the real world, to tackle the imperfect, you need a Timbren Suspension Enhancement System. Order the kit designed to fit your year, make, and model application.
( 186 )
$269.36
Monroe Max Air shock absorbers are ideal for vehicles that haul heavy loads or tow trailers. They're designed to maintain vehicle height and can be inflated or deflated as needed, from 20 psi to 150 psi with the vehicle loaded. If you're hauling heavy, try Monroe Max Air shock absorbers to get the job done. These adjustable shocks are available for fitment on hundreds of specific vehicle applications. Features: * All-weather fluid that contains special modifiers to ensure smooth rod reaction * Full displaced valving on both the compression and rebound for a comfortable ride * Sintered iron piston that enhances durability for long service life * Lubricated air sleeve that reduces friction and provides smoother operation during suspension movement * Hardened and precision-ground 1/2 in. piston rod for consistent performance * Large-volume air chamber that will hold a maximum of 150 psi
( 284 )
$135.99
—
$142.99
Monroe OESpectrum shocks and struts provide unprecedented handling precision and control, while removing the ride harshness that's common with many foreign applications. Their unique blend of comfort and control is due to Tenneco's "Twin Technology Active Control System." This exclusive internal damping control technology consists of an impact control valve (ICV) that delivers exceptional control in all driving conditions, together with a patented, low-speed tenability piston design to isolate impact-related noise, vibration, and harshness. Additional features include: * All-weather fluid with special modifiers to reduce friction and ensure smooth rod reaction * Rod displaced valving, specifically tuned for each application, adjusts to road extremes to provide consistency and ride comfort * Fluon banded piston provides consistent sealing between the piston and pressure tube, which delivers better control and increased durability * Hardened chrome plated piston rod for long service life * Nitrogen gas charged for improved ride and handling; helps maintain tire-to-road contact by reducing aeration * Unique rod guide and single lip seal provide longer service life and consistent performance
( 188 )
$144.99
Dorman Premium Chassis coil springs are perfect replacements for your old, worn-out springs. Dorman builds these coil springs to the original specs, so installation is easy and ride quality will not be sacrificed. They are finished in a black powdercoat that will resist corrosion due to the elements to help prolong their life. Fix up that old tired suspension with help from Dorman Premium Chassis and these replacement coil springs.
Not Yet Reviewed
$152.99
Dorman Premium Chassis tie rod ends deliver quality engineering, manufacturing, and performance—at a fraction of the original equipment cost. Their Premium and Premium XL chassis parts cover a comprehensive list of applications and go beyond the quality of OE components to provide extended service life on your vehicle. Replacement tie rod ends may look alike, but they differ in the way they're manufactured and the materials that are used. Dorman Premium Chassis tie rod ends are built to supply you with parts that are stronger, more durable, and more efficient. Order the model recommended for fitment on your specific vehicle.
( 18 )
$121.99
Dorman steering drag links are precision-engineered and rigorously tested to provide a reliable fit and performance. They are direct replacements and offered to fit many applications. Repair and maintain your vehicle's operation with the quality and confidence of Dorman steering drag links.
( 2 )
$112.99
Avoid costly trips to the dealership by repairing steering issues with these Dorman steering shafts. They feature precision U-j
( 50 )
$156.99
—
$157.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
