Availability
Showing In Stock Items. Show All 31 Items.
Want to improve the performance of your ride, without a major hassle? QA1 Stocker Star shocks could be your answer. They're lightweight, fully adjustable, and bolt right in. They rely on deflective-disc valving and have 18 levels of damping, which you can select at the twist of a knob—with the shocks in place on the vehicle. Stocker Stars have 5/8 in. hard-chromed centerless-ground piston rods, double-lip wiper seals, and one-piece, forged, machined-aluminum bodies that are bright-anodized for great looks and durability. Each shock is dyno-tested for consistency and comes with chrome or zinc plated mounting hardware. Order the model recommended for your vehicle application.
( 343 )
$209.94
—
$214.95
Auto Pro USA power steering cylinders are available for a variety of makes and models. These all-new reproduction cylinders feature correct original equipment design and are made of the best materials; no core is required. They are TIG-welded, direct-fit, OE-replacement cylinders and each one is bench tested for proper function and to ensure longevity. Where applicable, they come with correct OE-style band clamps.
( 26 )
$132.99
Gabriel Load Carrier shocks are the perfect combination of shock and spring technology to help reduce the loss of ride height in ongoing loaded conditions. These front and rear spring-assist shocks feature a chromed piston rod to inhibit corrosion—as well as ensure proper seal lubrication and provide a more consistent wear surface. Load Carriers also have a leakproof design to help prolong their life. Models are available for hundreds of vehicle-specific applications.
( 228 )
$107.99
—
$112.99
Lower your vehicle with Classic Performance lowering coil springs to add an aggressive look to your vehicle. Look no further than Classic Performance when you want to replace your worn-out original springs or to provide a modern look with an improved ride.
( 163 )
$128.99
—
$148.99
Are you looking for high performance aluminum shocks on a budget? QA1 Stocker Star NA shocks to the rescue! These premium stock mount, non-adjustable shocks are small body designs that bolt right up to your factory mounts. Stocker Star NA shocks feature a twin-tube design with centerless-ground, hard chrome plated piston rods inside durable, anodized, machined aluminum bodies--just like QA1 premium shocks, but at a more affordable price. These shocks have increased valving response, control, and consistency, plus double-lip seals with wipers to eliminate seal drag and stop dirt from entering. Unlike most replacement shocks, Stocker Star NA shocks can be serviced, revalved, and rebuilt. Get high performance and a professional look at a price that you can afford with QA1Stocker Star NA shocks.
( 85 )
$174.85
—
$179.95
When swapping out the engine in your hot rod, you need motor mounts and inserts that you can count on. Trans-Dapt has done all of the work for you in making these engine swap motor mounts. The units are available for a variety of mounting styles, and they're made with quality materials, such as rubber, steel, and polyurethane. These motor mounts are designed for specific vehicle and/or engine applications, so you can be assured of a perfect fit and great performance.
( 347 )
$136.99
Gabriel HiJackers air shocks are the original air-adjustable shocks designed to provide customizable performance and support. They can be adjusted and readjusted to maintain proper ride height—and handle any of your temporary towing or hauling needs, including boats and campers. Hijackers feature chrome plated piston rod construction and deluxe wiper seals that provide optimum sealing. Dozens of models are available, covering thousands of applications.
( 608 )
$168.99
—
$171.99
Get great handling for your ride with Classic Performance rear sway bar kits. They help to reduce body roll and control oversteer and understeer in corners. These kits come complete with a sway bar, poly bushings, mounting brackets, and all necessary hardware.
( 216 )
$188.99
Reduce body roll, understeer, and generally sloppy handling with Addco Performance anti-sway bar kits. The bar is made from high-carbon steel—and is hardened and stress-relieved to give your suspension superior support during sudden or sharp turns. Most kits include 12-gauge zinc chromate plated brackets with fully enclosed bushings, along with heat-treated end link bolts for added strength. Order the model designed for your vehicle application.
( 269 )
$220.39
—
$257.96
Lares engineers their new (not remanufactured) power steering slave cylinders to meet or exceed OE specifications. Each unit is hydraulically tested, and the ball joints are lubricated with high-quality grease to ensure original fit and performance. Models are available for hundreds of vehicles from the 1950s, '60s, '70s, and '80s. Order the replacement steering slave cylinder recommended for your application.
( 12 )
$174.99
Brothers Trucks cab mount supports are quality stamped for a precise fit and appearance. Available in models to fit either the driver or passenger side of your truck, these bracket supports are constructed with thick, OE-gauge steel to provide high-strength and then are EDP coated for corrosion protection. Replace those aging or rusty cab mounts with brand new supports. Order the model designed to fit your Chevy or GMC vehicle.
( 1 )
$182.95
Chassis Engineering engine swap mounting kits are designed secure your new engine to your classic vehicle. They have a large collection of complete engine mount kits for various car models. They match particular engines to specific chassis. They also offer adjustable universal kits for a large variety of engines, in a number of different lengths to make them work with just about any frame type. The engine mount style is chosen based on the type (brand/model) of engine, and the engine mount length is determined by the width of the frame. Depending on the application, these kits may include bolt-on or weld-on steel frame adapters, steel engine side mounts, a polymer cushion set, hardware, and instructions. Exchange the engine in your project with the support of Chassis Engineering engine swap mounting kits.
( 7 )
$219.00
Lares takes care to clean their remanufactured power steering cylinders thoroughly, and all exterior surfaces are reconditioned for a like-new appearance. Each component is inspected and replaced if it's not up to OE tolerances. All units receive new OE-equivalent chrome shafts, seals, and O-rings; then they're tested to ensure proper performance. Models are available for over a hundred vehicles from the 1950s, '60s, '70s, and '80s; order the replacement slave cylinder recommended for your application.
( 5 )
$141.99
—
$142.99
QuickTime midplates open up a wide number of engine types that can be installed in your vehicle and will make the installation and removal of the engine much easier. They fit between the engine and the transmission for universal mid-mounting and are constructed from 3/8 in. H60 Grade steel.
( 2 )
$172.95
Summit Bucks
ACDelco specialty shocks and struts are available to fit many GM sport utility and performance vehicles on the road today. They're built to handle demanding applications, like towing and temporary loads. ACDelco offer heavy-duty replacement options, as well as spring-assisted shocks. Many feature super-finished, chromed piston rods that provide anti-corrosion properties, a more consistent wear surface, proper seal lubrication, and longer product life. Get great ride and handling for your sport utility or performance vehicle with ACDelco specialty shocks and struts.
( 23 )
$119.99
Panhard rods control lateral movement of the rear axle so that your rear-end stays centered and aligned. Heidts offers classic truck and street rod panhard rods to keep your ride balanced in and out of corners and on rugged off-road terrain. These strong, rigid bars are a must with parallel 4-link suspension kits and are available in bolt-on and weld-on models. You choose either a plain steel or polished stainless steel tube. Heidts classic truck and street rod panhard rods include an axle bracket, a bar with a stainless adjuster, urethane bushings, and a frame bracket. Make a move to better handling with Heidts panhard rods.
( 3 )
$162.00
Dorman leaf springs are perfect replacements for your old, worn-out springs. Built to the original specs, these leaf springs feature a black powdercoated finish to resist corrosion due to the elements to help prolong service life and include the required rubber bushings for installation. Fix up that old, tired suspension with help from Dorman and these replacement leaf springs.
( 45 )
$220.99
Lares remanufactured steering gears make the perfect replacement for your original equipment needs. These power steering gears are thoroughly cleaned and all exterior surfaces get reconditioned for a fresh like-new appearance. All units receive new OE-equivalent seals and O-rings, then each unit is tested to ensure proper performance. Lares also lubricates each steering gear unit, and applies a fresh coat of high-quality paint, so they come ready to install them and go! Verify the fitment and order the Lares remanufactured steering gear unit designed to fit your application.
( 58 )
$249.99
Are the bushings in your lower control arms worn and causing handling problems? No worries, Brothers Trucks offers control arm shafts as a quality replacement to improve the performance and handling of your classic truck. These steel replacement lower control arms feature new seals, bushings, end caps, and grease seals. They are available to fit the left or driver side lower front control arm or the right or passenger side lower front control arm. Choose the Brothers control arm shafts designed for your application needs.
Not Yet Reviewed
$173.95
Chassis Engineering coil springs are the right length for your street rod use. Their springs are available in three rates and there's no shortening necessary. Get the perfect fit with a pair of Chassis Engineering coil springs.
( 1 )
$225.00
Once you've located the donor AMC Pacer (required, but not included), you'll find the use of these Pacer IFS mounting kits from Chassis Engineering gives you the ability to upgrade your vehicle's front suspension setup. Ok, it may require a bit of hard labor, but so worth it in the long run! That's because after the kits' steel brackets are welded to the Pacer crossmember, the rest of installation is bolt-on! The original Pacer crossmember bolts in, containing all of the needed suspension parts (original A-arms, springs, tie rods, steering, shocks, etc.) in a single unit.
Not Yet Reviewed
$134.00
On Sale
Hurst transmission crossmembers are designed and fabricated from thick steel plate and heavy-gauge steel tubing for a perfect fit and finish. These bolt-in units are much stronger than the factory stock crossmembers and help maintain the correct transmission and driveshaft angles. Precision-cut and fully MIG-welded, they are given a durable black powdercoat finish to last a lifetime and give you peace of mind knowing you are buying the best for your transmission conversion. Trust the company that originally started out making conversion mounts back in 1958, Hurst Performance.
( 7 )
$473.95
$260.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
