Availability
Showing In Stock Items. Show All 21 Items.
BMR Suspension K-members feature a unique tubular design that will allow you to drop the weight on your front-end by more than half of the factory piece. They provide a lightweight alternative, while offering larger tubing for durability. BMR K-members also provide more clearance for aftermarket headers and turbo systems. They will work with stock or aftermarket A-arms (except where noted), providing an additional 1/4 in. adjustment, equaling up to 4 more degrees of camber.
( 24 )
$519.95
—
$689.95
UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. These tubular K-members also feature integrated motor mounts, eliminating the stock cast iron mounts for maximum weight savings. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting
( 17 )
$704.44
—
$1,566.96
UMI Performance Road Race K-Members are designed for serious racers who expose their vehicles to more stress than any street cars will ever experience. Using an additional 1.000 in. of tubing, UMI Performance Road Race K-Members tie together crucial areas. They weigh in at 3 lbs., more than UMI's standard version, but still maintain a much-needed weight savings.
( 3 )
$929.99
—
$999.99
BMR torque arm relocation kits allow you to move the torque arm mount to reduce the stress on the tailshaft. These kits replace your transmission crossmember with a stronger tubular piece that also has an integrated torque arm mount. The mount itself is adjustable up and down to allow for easy "instant center" adjustment. They are made from heavy-wall DOM tubing and 1/4 in. mounting plates and hardware are also included.
( 17 )
$259.95
UMI Performance shock tower braces make a great beginning for modifying your favorite ride. These braces positively connect your front right and left shock towers together for firmer handling and improved steering response. Constructed in the USA, UMI shock tower braces are available in DOM mild steel tubing with CNC-machined mounting plates. Or, if you're worried about adding front end weight, choose UMI's just as strong but lighter weight 4130 chromoly steel tubing braces. Both choices are given a brilliant and durable powdercoat finish in several colors. Beef up your chassis and get ready to hit the winding roads with UMI Performance shock tower braces.
( 50 )
$159.99
—
$199.99
On Sale
Get your LS engine installed properly using one of these Hooker transmission crossmember extension brackets. They are manufactured from quality materials and bolt in place for an easy installation. The brackets are available for different types of transmissions, so they're sure to have you covered.
( 4 )
$45.36
—
$80.95
Allstar Performance oil filter adapters are stock replacements designed to fit your engine block and accept an oil filter. These adapters are made with high-quality materials to create a durable product that you can depend on for years to come.
( 115 )
$7.99
BMR Suspension shock tower braces put a bite in your traction! By tying the shock mounts together, you strengthen the front subframe assembly and minimize tower deflection for less flex and body roll. These steel braces do just that. They're made strong from hefty tubing to ensure zero deflection under load. With their easy installation, BMR shock tower braces are impressive improvements that give you the edge you need while driving.
( 54 )
$159.95
—
$199.95
QA1 strut tower braces allow the substructure of the chassis to be fully triangulated. This amounts to more precise steering input, better alignment, and reduced flexing for the ultimate in cornering power and control. They're made from high-quality steel tubing and are black powdercoated for good looks and corrosion resistance.
Not Yet Reviewed
$199.95
Most stock chassis flex dramatically, even with mild amounts of torque and horsepower. BMR suspension strut tower braces reduce chassis flex and increase handling and performance. They are manufactured from a mix of large diameter DOM steel tubing and thick laser-cut steel plate. Depending on the application, they are available in two-point and four-point designs that solidly link the front strut towers, adding strength to the entire front unibody and suspension. Most are available in black hammertone and red powdercoat finishes for long-lasting good looks. BMR strut tower braces are 100 percent bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. Installation time is typically less than an hour. When performance is a must, rely on BMR Suspension!
( 168 )
$189.95
—
$429.95
Increase the floor and driveshaft tunnel rigidity of your vehicle with steel reinforcements from BMR Suspension. These tunnel braces are available in a variety of styles and protective finishes, and will strengthen the chassis stiffness for aggressive maneuvering, as well as steering feel and stability on the track or street. Most of the BMR tunnel braces are bolt-on style requiring no drilling or welding. Order the model designed for fitment on your ride.
( 26 )
$99.95
Replace your weak factory transmission tunnel braces with Granatelli heavy-duty G-load braces. Their unique design integrates an NHRA-approved driveshaft safety loop, reducing chassis flex and improving safety. Each system includes a heavy-duty G-load brace, a driveshaft safety loop, and all necessary hardware. Installation takes about 30 minutes using basic hand tools.
( 4 )
$123.59
ACDelco offers differential carrier brackets for a wide range of truck and SUV applications. These OE-style replacements are built with same materials used on the factory originals, and are designed to fit and perform like stock. Order the brackets recommended for your vehicle and diff position.
Not Yet Reviewed
$97.99
By tying the shock mounts together, you strengthen the front subframe assembly and minimize tower deflection for less flex and body roll. BMR's steel shock tower braces do just that. Made strong from hefty tubing to ensure zero deflection under load, they are the strongest braces available. With their easy installation, BMR Xtreme shock tower braces are impressive improvements that give you the edge you need while driving.
( 4 )
$309.95
UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these tubular K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting
Not Yet Reviewed
$699.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
