Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
38 Results Found For "arms"
Classic Performance Tubular Control Arms
Classic Performance tubular control arms are designed to add up to five degrees of caster in certain applications, while providing full wheel travel. They're manufactured from 1.250 in., 0.120 in. thick wall DOM tubing, with pivot barrels made from 1.500 in., 0.188 in. thick wall DOM tubing to help eliminate distortion. These control arms use bushings made from self-lubricating, non-squeak patented material that will outlast any rubber or polyurethane bushing. The control arms are designed as bolt-in replacements for your factory originals. Classic Performance tubular control arms will tighten up your front suspension and give you that performance ride through the corners and on straight roads. Select the model and options recommended for your vehicle.
( 126 )
$524.99
Global West Suspension Plus 3 Upper Control Arms
Global West Suspension Plus 3 upper control arms improve the caster and performance of your classic Mustang. Plus 3s are engineered to provide your ride with three degrees of positive caster. Caster plays an important role in the handling of your car, and normally, when running larger tires, your adjustments are limited in order to keep your tires from hitting the front fender during turns. But, now with Global West Plus 3 upper arms, you'll be able to get the caster you need to maintain optimum performance. The control arms are powdercoated, assembled, and shipped with billet cross shafts, Del-a-lum bushings, and ball joints. Order the pair recommended for your application.
( 19 )
$599.00
Heidts Superide Independent Front Suspension Kits
Independent front suspension gives you twice the ride of a new 4-link dropped axle at a comparable cost. These Heidts Superide independent front suspension packages have been engineered for a correct, safe ride, while providing the ultimate stance. They feature a one-piece crossmember with upper control arms that clear the fenders, and their 56 in. hub-to-hub tread width gives you the narrow look without any tire-to-fender clearance problems. The packages include specially designed one-piece 1045 heat-treated alloy steel spindles to give you the lowest possible ride available, the high-tech appearance you want, and assurance of the right geometry, right fit, and a great ride. Nearly a hundred packages are available to fit applications from the 1920s and up. Components include: * Heidts one-piece crossmember * Superide spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, rear mounted * Billet single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$5,213.00
—
$6,154.00
Heidts Mustang II Front Suspension Kits
Get your street rod up and rolling and improve your vehicle's suspension, handling, and performance with one of these Heidts Mustang II front suspension kits. Kits include: * Crossmember * Tubular upper and lower full A-frame style control arms * 11 in. diameter brake rotors * Bearings * Seals * Shocks * Springs * Stock-type spindles * Manual rack and pinion mounted to the front of the crossmember for additional engine clearance * Outer tie rod ends * Rubber spring cushions * Spindle nuts * All necessary mounting hardware
( 5 )
$2,700.00
Heidts Nova Subframe/Crossmember Suspension Packages
You're low ridin' and lookin' good with Heidts Nova subframe/crossmember suspension packages. Your Chevy Nova will have a lower stance and the superior handling that street rods have enjoyed for some time. Heidts suspension packages make it easy to get that timeless look. Packages include: * Heidts front subframe * Tubular upper and lower arms * Stock spindles * 11 in. rotors with single-piston calipers * Manual rack and pinion steering * Stock shocks and springs
Not Yet Reviewed
$4,247.00
Heidts Superide II Independent Front Suspension Kits
Enjoy driving your fat-fendered cruiser with the smooth ride and handling of independent suspension. Heidts Superide II independent front suspension kits utilize a Mustang II spindle to allow for a front mount rack and pinion unit, making engine installation much easier. The upper control arms use threaded adjusters for the wheel alignment. Unlike eccentric adjusters, they will never slip or lose alignment when hitting bumps in the road. Dozens of packages are available for applications from 1935 and up. Components include: * Heidts 3-piece crossmember * Mustang II stock spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, front mounted * Billet single adjustable coilover shocks with silver powdercoated springs
( 1 )
$5,317.00
—
$5,854.00
Heidts 1970-74 Mopar Challenger and Barracuda PRO-G Independent Front Suspension Kits
Heidts 1970-74 Mopar Challenger and Barracuda PRO-G independent front suspension kits are a comprehensive, bolt-in upgrade designed to replace the stock factory torsion bar suspension with a modern, high-performance, double A-arm front suspension system. Specifically engineered for 1970-1974 E-body vehicles, these kits improve handling and cornering using adjustable coilovers, rack-and-pinion steering, and Wilwood brakes. Key features: * Complete system: Hub-to-hub kit includes a new crossmember, tubular control arms, spindles, and power rack-and-pinion steering * Performance upgrades: Features QA1 adjustable coilover shocks and springs for height and ride tuning * Improved geometry: Designed to eliminate bump steer and allow for significant caster and camber adjustments * Braking: Comes standard with 11 in. Wilwood rotors and 4-piston calipers * Engine fitment: Accommodates Mopar small block, big block, and Gen 3 Hemi engines, usually requiring a rear-sump oil pan * The kit is tailored to bring modern handling capabilities to classic Mopar muscle cars, reducing unsprung weight and increasing overall torsional rigidity
Not Yet Reviewed
$7,623.00
Strange Heavy Duty 4-Piston Forged Aluminum Strut Packages
These Strange heavy-duty 4-piston forged aluminum strut packages will give your race car the consistency you need. They are recommended for vehicles over 2,600 lbs. and are designed for drag racing only. The packages include the following: * Strange heavy-duty 4-piston calipers with brake pads * Strange 11.250 in. slotted forged steel rotors * chromoly lower control arm kit * Strange adjustable forged aluminum struts * Hypercoil springs * Spring seat bearing kit A specification sheet must be filled out prior to ordering. The bolt pattern, lower control arm rod end diameter, and coilover spring rate are needed for your application. Please call us at 1-800-230-3030 for further information.
( 2 )
$2,349.99
—
$2,614.99
Heidts 1962-67 Nova Superide II Independent Front Suspension Kits
Enjoy driving your fat-fendered cruiser with the smooth ride and handling of independent suspension. Heidts Superide II independent front suspension kits utilize a Mustang II spindle to allow for a front mount rack and pinion unit, making engine installation much easier. The upper control arms use threaded adjusters for the wheel alignment. Unlike eccentric adjusters, they will never slip or lose alignment when hitting bumps in the road. Dozens of packages are available for applications from 1935 and up. Components include: * Heidts 3-piece crossmember * Mustang II stock spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, front mounted * Billet single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$6,154.00
Classic Performance IFS Front Suspension Packages
Classic Performance IFS front suspension packages are designed to convert the entire front suspension of your classic car. You can now enjoy the smooth ride and handling of independent suspension, while lowering the ride height of your vehicle. Order the package recommended for your vintage application. Features include: * New crossmember * Tubular upper and lower control arms with polyurethane bushings * Manual rack and pinion with tie rod ends * Coil springs (some kits may include adjustable billet coilovers with springs) * Heavy-duty forged steel spindles * Brake calipers and rotors
( 7 )
$1,920.99
—
$2,299.99
Strange Medium Duty 2-Piston Forged Aluminum Strut Packages
These Strange medium-duty 2-piston forged aluminum strut packages will give your race car the consistency you need. They are recommended for vehicles under 2,600 lbs. and are designed for drag racing only. The packages include the following: * Strange medium-duty 2-piston calipers with brake pads * Strange 11.250 in. slotted forged steel rotors * chromoly lower control arm kit * Strange adjustable forged aluminum struts * Hypercoil springs * Spring seat bearing kit A specification sheet must be filled out prior to ordering. The bolt pattern, lower control arm rod end diameter, and coilover spring rate are needed for your application. Please call us at 1-800-230-3030 for further information.
( 1 )
$2,169.99
—
$2,489.99
Classic Performance Polyplus Front-End Kits
Classic Performance Polyplus front-end kits are an upgrade for worn-out stock rubber components. The ultimate in efficiency, they offer increased durability and outstanding performance. POLYPLUS graphite bushings combine polyurethane with the superior lubricating qualities of graphite for a smooth, quiet operation. Polyplus products withstand the abusive environmental elements that your vehicle encounters on a daily basis. All kits are vehicle-specific; check the applications for the package which best suits your needs. They include upper and lower ball joints, outer tie rod ends, control arm bushings, and bump stops. Sway bar bushings are sold separately. The complete kits also include inner tie rod ends, tie rod adjusting sleeves, and idler arm bushings.
( 7 )
$527.99
—
$642.99
Strange Lightweight Single Piston Aluminum Strut Packages
These Strange lightweight single-piston aluminum strut packages will give your race car the consistency you need. They are recommended for vehicles under 2,400 lbs. and are designed for drag racing only. The packages include the following: * Strange spindle mount brake kit * chromoly lower control arm kit * Strange externally adjustable forged aluminum struts * Hypercoil springs * Spring seat bearing kit A specification sheet must be filled out prior to ordering. The bolt pattern, lower control arm rod end diameter, and coilover spring rate are needed for your application. Please call us at 1-800-230-3030 for further information.
Not Yet Reviewed
$1,994.99
—
$2,449.99
Classic Performance Front Coilover Conversion Kits
Classic Performance front coilover conversion kits can help drop your ride from just below stock height to several inches lower. The included shocks are double adjustable coilover models so you can pinpoint the type of ride you want. These kits provide lower control arms featuring either a silver or black powdercoat finish, depending on application; upper control arms are included with most kits, along with mounting hardware. Convert your vehicle into a low-riding road-hugger with a Classic Performance front coilover conversion. Order the kit designed to fit your application.
Not Yet Reviewed
$1,806.99
Classic Performance Pro-Touring Stage 1 Kits
Classic Performance Pro-Touring Stage 1 kits provide the ultimate in performance for an affordable price. They are made with the quality you have come to expect from Classic Performance Products. Included with the Stage 1 kits are front and rear performance sway bars, lowered springs, gas-charged monotube front and rear shocks, and mounting hardware.
( 2 )
$1,777.99
—
$2,560.99
Heidts Pro-G Independent Rear Suspension Kits
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$7,892.00
—
$15,504.00
AJE Suspension Mustang Tubular K-Member Complete Swap Kits
Are you swapping in a new engine to your Mustang? If so, AJE Suspension Tubular Mustang K-member swap kits should be your choice to drop the engine you want under the hood of your pony. These swap kits are produced exclusively by AJE Suspension with bolt-in K-members that fit your Mustang and the necessary motor mounts to mount any engine--Chevy or Ford! First, AJE motor mounts are stronger than factory setups, so they can handle the power of your turbos and blowers. Second, their K-members are crafted from steel. They offer no bent tubes and triangulated load paths to deliver the strength that you need without adding extra weight that you don't need, as well as extra header/oil pan clearance! The swap kits also include A-arms, coil-over spring kits, and, depending on the application, caster/camber plates. One last thought--if you decide to part with your pony and keep your engine, you'll have plenty of interested parties, as the new buyer can mount any engine they choose without changing the K-member. Why waste money on K-members that mount only one family of engines? Compare price, quality, and design--you'll be ready to update your pony with the suspension technology of AJE Suspension tubular K-member complete Mustang swap kits.
( 12 )
$3,004.99
—
$3,006.99
Scott's Hot Rods IFS Packages
Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
( 4 )
$3,386.99
—
$5,398.99
Classic Performance Pro-Touring Stage 2 Kits
Classic Performance Pro-Touring Stage 2 kits provide the ultimate performance for an affordable price. They are made with the quality you have come to expect from Classic Performance Products. Included with the Stage 1 kits are front and rear performance sway bars, lowered springs, adjustable coilover shocks, and mounting hardware.
( 3 )
$2,560.99
—
$2,652.99
Strange Ultra Strut Packages
These Strange Ultra Strut packages are designed for the most demanding Pro and Sportsman racers. They have been developed and track-tested by chassis builders and top racers for over two years. The Strange Ultra Strut packages include a pair of coilover shocks, coilover springs, a lower control arm kit, special wheel races and bearings, a disc brake kit, and aluminum steering arms. A specification sheet must be filled out prior to ordering and a coilover spring rate is required for your application. Please call us at 1-800-230-3030 for further information.
Not Yet Reviewed
$2,833.99
—
$5,396.99
Heidts 1964-70 Ford Mustang PRO-G Independent Rear Suspension Kits
Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$14,973.00
Heidts 1947-54 Chevy Truck Complete Chassis Kits
Heidts 1947-54 Chevy Truck Complete Chassis Kits come loaded with Heidts' Mustang II independent front suspension and 4-link rear suspension with housing and coilover shocks. The Mustang II suspension features tubular control arms, 11 in. rotors with single-piston GM calipers, stock or drop spindles, steering rack, and shocks and springs. 1947-54 Chevy truck complete chassis kit details: * Brand new 1947-54 Chevy truck frame * Complete Heidts Mustang II independent front suspension with manual rack and pinion * Tubular control arms compatible with coilover shocks * 11 in. solid iron brake rotors, with GM brake calipers and Chevy bolt pattern * Choice of front spring rate with stock shocks (300 lb., 350 lb., or 375 lb.) * Stock spindles * Sway bar * 4-link rear suspension * Rear black coilover shocks with 300 lb. coil springs * 9 in. Ford housing and 31-splin axles
( 1 )
$14,637.00
Heidts 1967-72 Chevy C-10 Complete Chassis Kits
Heidts 1967-72 Chevy C-10 Complete Chassis Kits are the best bang for your buck, if you're looking to replace and upgrade your truck frame. 1967-72 Chevy C-10 complete chassis kit details: * Brand new 1967-72 C-10 frame * Heidts 1967-72 Superide independent front suspension * 1 1/4 in. upper and 1 1/2 in. lower tubular control arms * Front billet single adjustable coilover shocks with 450 lb. coil springs * 11 in. iron rotors with black 4-piston Wilwood calipers and GM bolt pattern * Power rack and pinion steering with 20:1 ratio and 3 Turn-to-Lock * Stock spindles * Heidts 1967-72 C-10 rear 4-link suspension * Rear billet adjustable coilover shocks with 300 lb. coil springs * 64 in. track housing with weld-on brackets and 31-spline axles
Not Yet Reviewed
$20,230.00
—
$28,592.00
Stifflers Suspension Ridetech HQ Coilover Shock Kits
Stifflers Suspension Ridetech HQ Series coilover shocks are specifically designed as bolt-in kits for use with Stifflers lower control arms (sold separately), providing superior ride quality and handling to your F150. These kits include coilover shocks, springs, and all necessary hardware to facilitate the installation. Additional features of Ridetech HQ Series shocks: * Monotube design allows for superior ride and handling * One-piece impact forged body with hard coat external anodizing * Hardened shaft * Adjuster knob allows 26 clicks of rebound adjustment * External and internal bump stops built-in * Billet end cap with integrated debris wiper to prevent seal damage * PTFE piston wiper and progressive valving allow consistent piston/bore contact and repeatable performance * Housing bore is cathode anodized for years of wear resistance * Long-lasting Kevlar® lined bearings allow wide articulation with low noise * Lower control arm (FLCA-FT02) not included Note: One of the most critical factors is matching the correct stroke shock to your desired ride height.
Not Yet Reviewed
$779.95
