Availability
Changing your suspension shackles? Trail-Gear greasable bolts will help. They offer three sizes and feature threaded zerk fittings that won't fall out when you're lubing up. The shackles are designed for use with TG leaf springs (not OE replacements). Secure your truck's shackles for a more stable ride with Trail-Gear greasable bolts.
( 1 )
$9.99
Do you need parts to build or change your own shackles? Trail-Gear shackle bolts are available. These factory size 18mm bolts are greasable and feature threaded Zerk fittings that won't fall out when you're greasing up. Trail-Gear has all of the pieces you need to install their leaf springs properly.
Not Yet Reviewed
$9.99
Square or round, Trail-Gear has the U-bolts you need. Manufactured from Grade 5 steel, they are made for 3 in. O.D. axle tubes. Secure your spring packs with Trail-Gear U-bolts.
( 3 )
$12.99
Find great strength in Trail-Gear Super Metal knuckle bolts. When you need to replace your Kingpin knuckle bolts and you want something stronger, these bolt kits should be what you are looking for. Go stronger than stock and make your rig truly trail-worthy with the addition of Trail-Gear Super Metal knuckle bolt kits.
Not Yet Reviewed
$39.99
Tired of getting hung-up? It only takes one instance of entanglement to fully appreciate what Trail-Gear U-bolt flip kits can deliver: escapability and better protection from damage! These simple add-on accessories provide better under-vehicle allowance when you head off-road or anywhere with obstacles to cross. The steel U-bolts are installed under each axle to allow you to just slide over rocks and debris. Trail-Gear kits contain two flip plates and four 9/16 in. bolts with nuts and washers. Front kits will allow for spring packs up to 2 in. thick, and rear kits will fit spring packs up to 2.5 in. thick.
( 8 )
$76.49
—
$89.99
Trail-Gear U-bolt flip plates are ideal if you're doing a shackle flip, axle swap, or other lift-type change. Convert your truck to a durable, off-road-friendly round bottom setup for better ground clearance and less possibility of damaging the threads. They are designed to accommodate U-bolts that fit a 2 in. thick spring pack in the front, and 2.5 in. thick spring pack in the rear. Using new extra-heavy-duty upper plates to convert your truck to the durable, off-road friendly setup is the right upgrade if you're already buying new U-bolts.
( 2 )
$13.25
Through years of research, development, and testing Trail-Gear has developed these Rock Assault double-ended ram kits—to meet the tough demands of top-level rock crawling competitors and the toughest trails in the world. Most rams on the market only have one rod seal. Trail-Gear started with the primary and secondary rod seal to insure that fluid leakage would never be an issue. They also included two wiper seals in the design to ensure that dirt and debris stays on the trail—and doesn't invade your steering system. In addition, the ram was designed with a triple-lip piston seal for consistent steering with no drift or fluid bypassing the piston. In true Trail-Gear style, the Rock Assault kits are engineered to be the strongest on the market, so they're designed with a piston wear band and a rod bushing. This bushing allows the rod to absorb much higher side loads. The piston shaft is machined from a single piece of 4340 chromoly. Trail-Gear Rock Assault double-ended ram kits are available with a 6, 8, or 10 in. stroke. The cylinder has a black zinc plated finish, while the rod has 3/4-16 in. female threads on each end.
Not Yet Reviewed
$552.49
—
$649.99
Designed for use with TG leaf springs, Trail-Gear shackle plates are zinc plated and available in three lengths to fit your project. When you need the right parts to build or change your own shackles, Trail-Gear has all the essential pieces.
Not Yet Reviewed
$12.99
Got a broken OE rubber motor mount? Trail-Gear Bomb Proof engine mount kits offer the quality and strength you need. The base of these motor mounts is made from 1/4 in. plate. The surface plate that the motor sits on is made out of 3/8 in. material and has a Class 10.9 bolt that is mechanically locked to the engine mount plate--not just threaded in. Bomb Proof mounts are given a silver zinc plating that looks sharp and will last a lifetime. The bushings are made out of high-grade polyurethane for added durability, and the mount holes are slotted so that your install is easy. Upgrade your vehicle to Trail-Gear Bomb Proof engine mount kits.
( 9 )
$189.99
If you're installing crossover steering, the time you'll save with one of these mounting kits is well worth the investment. They make swapping to the Trail-Gear IFS steering box much easier. The heavy-duty kits feature 3/16 in. inner and 1/4 in. outer frame reinforcing plates, with angled leading and trailing edges to avoid frame cracking. You'll also receive Grade 8 bolts, crimp nuts, and dependable DOM tubing to complete the project.
( 3 )
$89.99
It's all about the springs! Trail-Gear IFS Eliminator heavy-duty kits offer front springs in a more durable version with 20 percent higher spring rate. They have added a 7th leaf and readjusted the length of the leaves to match. So, if you're running a larger V6 or V8 motor, you'll appreciate these muscular springs. Trail-Gear IFS Eliminator heavy-duty kits are available in different configurations to best suit your specific vehicle application needs. Kits include: * Front leaf springs (your choice of 3, 4, or 5 in. spring) * High Steer crossover steering kit * Front drop hanger with greasable bolts * Greasable 5 in. shackles * Frame tubes and jigs * Steering stabilizer kit * U-bolt flip kit * (2) Shock hoops * (2) Bilstein shocks * (2) Front brake lines * (2) Vented rotors * (2) Bump stop extensions * (2) Wheel spacers * (2) Bump stops * Front axle gusset * Axle diff armor * Knuckle service kit * Wheel bearing kit * Motor mount cover plates * Spring pad * Instructions
Not Yet Reviewed
$1,799.99
Trail-Gear double-shear brackets are made from 1/8 in. thick 4130 chromoly steel for fabrication strength. They're designed for double-shear mounting limit straps or seat belt tabs. The brackets are sized to mount a 1/2 in. bolt and require welding for mounting on your vehicle.
( 4 )
$9.99
Trail-Gear clevis end kits are affordable and include everything you need to reinforce your ram and improve your steering. The clevis ends are clear zinc plated for a sharp look and a long-lasting finish. They will fit most large double-ended rams and 3/4 in. single-ended rams. This design works best with Heim-style rod ends with a 3/4 in. bolt hole. Kit includes: * 2 clevis ends * 2 clevis end bolts * 2 Grade 8 bolts * 4 spacers
( 1 )
$99.99
Replacement bushings designed to fit Trail-Gear leaf springs are made of polyurethane to slide over the bolt smoothly with just the right amount of give to prevent your fittings from falling out when you're greasing up. Polyurethane is harder and stronger than rubber for durability and ride quality. Restore positive handling and control with Trail-Gear bushings. (Note: Make sure the grease you use is compatible with polyurethane.)
( 4 )
$5.94
—
$49.99
With all of the choices on the market for solid axle conversion, you're probably wondering what makes Trail-Gear IFS Eliminator kits stand out? These kits contain the highest quality and most complete parts roster at an affordable price. Plus, Trail-Gear offers the package in three different ride heights! Kits include: * Front leaf springs (your choice of 3, 4, or 5 in. spring) * High Steer crossover steering kit * Front drop hanger with greasable bolts * Greasable 5 in. shackles * Frame tubes and jigs * Steering stabilizer kit * U-bolt flip kit * (2) Shock hoops * (2) Bilstein shocks * (2) Front brake lines * (2) Vented rotors * (2) Bump stop extensions * (2) Wheel spacers * (2) Bump stops * Front axle gusset * Axle diff armor * Knuckle service kit * Wheel bearing kit * Motor mount cover plates * Spring pad * Instructions
( 1 )
$1,799.99
Get the right angle with Trail-Gear driveline spacer kits. Lifting your rig can change the pinion angle between your driveline and rear axle, resulting in excessive vibration. Fit the spacers between the carrier bearing and the crossmember to lower the carrier bearing to the correct driveline angle. They are made from zinc-plated steel to prevent corrosion and include longer M10 mounting bolts. Plus, the install only takes minutes, so you can be back on the trails and riding smooth in no time. Give your rig a better stance on performance with these Trail-Gear driveline spacer kits.
Not Yet Reviewed
$69.99
Reduce steering vibrations at higher speeds with Trail-Gear steering stabilizer kits. These very helpful components can help keep you riding smoothly. One end welds to the passenger side frame rail and the other end bolts onto the drag link. Keep steering vibration to a minimum out on the trails with Trail-Gear steering stabilizer kits.
( 3 )
$99.99
Trail-Gear Trail-Link Four kits are the easy way to 4-link your rig. With these kits, the crossmember fits between frame rails and supplies frame mounts for all four links. The innovative TG design allows for a quick and easy installation. Trail-Gear Trail-Link Four kits offer choices of axle mounting for stock axle or Rock Assault housings, plus with or without long-travel air shocks that allow for more than 30 in. of rear axle articulation. TG Trail-Link Four kits include: * Heavy-duty 2 in. x .250 in. wall DOM links * Extra-large 1.25 in. creeper joints (4 right, 4 left) * Rod end jam nuts * Threaded link end bungs * Frame crossmember * Axle housing upper mount * 20 degree axle housing lower mounts (left and right) * Shock mounts with bolts and bushings * 9/16 in. x 4 in. link end bolts and locknuts
Not Yet Reviewed
$1,799.99
Trail-Gear creeper joint kits weld on, and are super strong to take on years of punishment—successfully. Each TG kit features an 8620 tool steel inner flex ball, high-quality polyurethane bushings, and heavy-duty, hardened steel washers to hold the joint together. They're offered in three different flex ball sizes: 9/16 in., 5/8 in., and 18mm, allowing you to choose the right size to match your application. With all kits, the flex ball is drilled for cross lubrication flow from the shell to the link mount bolt. Creeper joints are extremely flexible and allow for up to 40 degrees of movement when used with spacers. A threaded grease fitting is provided on the housing for lubrication. Trail-Gear weld-on creeper joint kits are provided unassembled, and are ideal for today's flexible suspension systems—as well as being perfect for creating your own A-arms, suspension links, or other suspension components.
( 1 )
$29.99
Avoid over-flexing your leaf springs and shocks with Trail-Gear bump stops. These durable polyurethane components can be welded or bolted in place. Trail-Gear recommends welding your bump stops to the top of the U-bolt flip kit plate.
( 2 )
$39.99
Trail-Gear creeper joints are also available in a shackle mount for use with leaf springs. Using a creeper joint on the shackle end of a leaf spring reduces spring binding and increases suspension flex. Creeper joint shackle mounts are sold in pairs and do not include the shackles, bolts, or spring bushings. Three different flex ball dimensions (9/16 in., 5/8 in., and 18mm) enable you to choose the right size to match your application. Additional details: * The outer shell is a single forged piece * The inner flex ball is made from 8620 tool steel and rides on high-quality polyurethane bushings * Heavy-duty, hardened steel washers hold the joint together * Allows for up to 40 degrees of movement when used with spacers * A threaded grease fitting is provided on top for lubrication * The flex ball is drilled for cross-lubrication flow from the shell to the link mount bolt * Toyota Pickup and 4Runner use 18mm size
Not Yet Reviewed
$110.49
Specifically designed for Toyota Tacoma trucks, the Trail-Gear Rock Defense dual T-case crossmembers provide a sturdy secure transfer case mount, while also providing superior transfer case protection while sliding across any rocks your vehicle can tackle. The Rock Defense T-case crossmembers are made from 3/8 in. thick 1010 steel, so you have confidence that your transfer case is supported and covered when you are sliding over even the nastiest rocks. These crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets. Trail-Gear also offers single transfer case crossmember kits. Both dual case and single case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when upgrading to dual cases. You simply bolt dual case crossmember into the same bracket, all that is needed is an additional T-case mount. Features and benefits: * Fits 1995-2004 Tacoma T-cases, automatic and manual transmissions, and uses your stock T-case mount(s) * Rock Defense T-case crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets * Supplied mounting brackets are 1/4 in. thick 1010 steel and all necessary Grade 8 mounting hardware is included with top locking nuts * Both single and dual case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when you upgrade to dual cases—simply bolt the dual case crossmember into the same bracket, all that is needed is an additional T-case mount (sold separately) * Crossmembers are shipped unpainted and should be painted or powdercoated before being installed
Not Yet Reviewed
$399.99
Trail-Gear Classic front lift kits are designed for first generation 1979-85 factory solid axle Toyota trucks and 4Runners. They include super flexible leaf springs, long-travel shocks, and high-steer crossover steering--all of which combine to bring you up to 20 in. of articulation for serious rock crawling ability. The kits are available in a choice of lifts, and depending on the specific tires and wheels, will accommodate 35 in. to 40 in. tires. Available heavy-duty versions have higher spring rates. Trail-Gear also added a 7th leaf and readjusted the length of the leaves to match. If you are running a larger V6 or a V8, you will appreciate the extra weight-carrying capacity of these springs. Trail-Gear Classic front lift kits include: * Front spring hanger with bolts and bushings * Front leaf springs with bushings * Greasable shackles * Two Bilstein shocks * Two shock hoops with gussets * U-bolt flip kit * Two extended front brake lines * High-steer crossover steering * Steering stabilizer kit * Small differential armor * Upper axle gusset * Knuckle rebuild kit * Two wheel bearing kits * Bump stops * Spring pad * Instructions
Not Yet Reviewed
$1,299.99
Trail-Gear offers rod end high misalignment spacers in a variety of sizes and angle options. These small parts increase misalignment by continuing the spherical diameter of the ball and allowing the edge of the ball to rotate into the body of the rod end. This enables greater articulation, more suspension travel, and longer life of the rod end. The inner diameter of each high misalignment spacer is smaller than the inner diameter of the rod end, so a smaller bolt is required. Machined from 303 stainless steel, the spacers are sold in pairs. (Note: Standard misalignment spacers are only used when the width of the ball is too narrow for the bracket it is being used with.)
( 1 )
$19.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
