Availability
After years of development and testing, Trail-Gear fully loaded Six Shooter kits have set a new standard for Toyota knuckle strength and reliability. They totally eliminate the problem of broken steering knuckles and studs. The addition of two studs in each arm effectively prevents the steering arm from becoming loose or shearing off the studs under extreme loads. The knuckle housing was designed with thicker-than-stock material, and larger gussets have been added around the outside of the knuckle for extra strength. Precision CNC-machined, each set of knuckles and steering arms are inspected and tested for the highest quality of products that Trail-Gear can deliver. These kits include a special 6-hole shim pack for use between the top of the knuckle and the steering arm assembly. A minimum of four additional steering arm studs are required for installation.
( 3 )
$499.99
—
$699.99
Whether you are hitting the trail, or ripping through the desert, Trail-Gear Performance bump stops will allow you to get the most out of your vehicles suspension by eliminating harsh bottom outs. Offered in 2 in. and 2.5 in. body diameters, the 2.5 in. models will absorb more impact energy and are recommended by Trail Gear for vehicles over 5,000 lbs. or trucks with highly leveraged A-arms or trailing arms. Of course, both sizes are sure to improve your overall off-road experience. Trail-Gear Hydraulic smooth body bump stops are fully rebuildable, easily tunable through the Schrader valve on top, and TG's unique automatic velocity sensitive valving technology saves you time by eliminating the need to adjust shim packs. The bump stops also help prevent damage from occurring to expensive shocks and suspension components by absorbing impacts at full suspension compression. Trail-Gear smooth body, pin top bump stops are available in 2 in., 3 in., and 4 in. travel options, and can be purchased individually or in sets that will also include four 1/4 in. thick ASTM A36 steel weld-on universal mounting brackets. Choose the size, stroke, and quantity desired for your vehicle. Hydraulic bump stop details and benefits: * Zinc-Plated SAE 1020 steel body * Hard chromed SAE 1045 steel rod * 6061 T-6 aluminum seal housing with dual PTFE coated bronze rod guides * Viton® O-ring with U-cup seal * 6061 T-6 aluminum piston * Automatic velocity sensing valve * Anodized 6061 T-6 aluminum end cap with polyurethane wiper seal * Replaceable Delrin® contact pad for smooth and quiet operation * Tunable by adjusting the nitrogen pressure and or oil volume * Schrader valve with machined aluminum cap for quick and easy pressure adjustment * Zinc-plated steel locking nut * Adjustable from 75 to 300 psi; ships pre-charged to 200 psi--a great starting point for tuning your suspension
Not Yet Reviewed
$399.99
Trail-Gear universal shock hoop kits are long enough to accommodate extended-length shocks. They're made from 1035 DOM and precision CNC-bent to ensure the highest quality product. The shock hoops are available in different sizes for fitment on specific applications. A universal model measures 16 in. from top to bottom, and 13 in. from the weldment mounting surface to the shock eye bracket.
( 6 )
$99.99
Trail-Gear creeper joints can take years of punishment! The outer shell of these these joints is a single forged steel piece. The inner flex ball is 8620 tool steel, the washers are heavy-duty hardened steel, and the bushings are polyurethane. TG provides a threaded grease fitting on top and a drilled flex ball for better lubrication; plus, each joint includes a jam nut. Choose from the selection of Trail-Gear Creeper joints to build your flex suspension.
( 3 )
$49.99
—
$129.99
Specifically designed for Toyota Tacoma trucks, the Trail-Gear Rock Defense dual T-case crossmembers provide a sturdy secure transfer case mount, while also providing superior transfer case protection while sliding across any rocks your vehicle can tackle. The Rock Defense T-case crossmembers are made from 3/8 in. thick 1010 steel, so you have confidence that your transfer case is supported and covered when you are sliding over even the nastiest rocks. These crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets. Trail-Gear also offers single transfer case crossmember kits. Both dual case and single case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when upgrading to dual cases. You simply bolt dual case crossmember into the same bracket, all that is needed is an additional T-case mount. Features and benefits: * Fits 1995-2004 Tacoma T-cases, automatic and manual transmissions, and uses your stock T-case mount(s) * Rock Defense T-case crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets * Supplied mounting brackets are 1/4 in. thick 1010 steel and all necessary Grade 8 mounting hardware is included with top locking nuts * Both single and dual case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when you upgrade to dual cases—simply bolt the dual case crossmember into the same bracket, all that is needed is an additional T-case mount (sold separately) * Crossmembers are shipped unpainted and should be painted or powdercoated before being installed
Not Yet Reviewed
$399.99
Avoid over-flexing your leaf springs and shocks with Trail-Gear bump stops. These durable polyurethane components can be welded or bolted in place. Trail-Gear recommends welding your bump stops to the top of the U-bolt flip kit plate.
( 2 )
$39.99
Trail-Gear bump stop extension kits help cushion your suspension, preventing bottoming-out and the extensive damage that can result from tire to body contact. Stop over-flexing your shocks and leaf springs. There are two bump stops and two extensions in each kit. The bump stops are welded to the top of the U-bolt flip plates and the extensions are welded directly to the frame.
Not Yet Reviewed
$49.99
Trail-Gear creeper joints are also available in a shackle mount for use with leaf springs. Using a creeper joint on the shackle end of a leaf spring reduces spring binding and increases suspension flex. Creeper joint shackle mounts are sold in pairs and do not include the shackles, bolts, or spring bushings. Three different flex ball dimensions (9/16 in., 5/8 in., and 18mm) enable you to choose the right size to match your application. Additional details: * The outer shell is a single forged piece * The inner flex ball is made from 8620 tool steel and rides on high-quality polyurethane bushings * Heavy-duty, hardened steel washers hold the joint together * Allows for up to 40 degrees of movement when used with spacers * A threaded grease fitting is provided on top for lubrication * The flex ball is drilled for cross-lubrication flow from the shell to the link mount bolt * Toyota Pickup and 4Runner use 18mm size
Not Yet Reviewed
$129.99
Through years of research, development, and testing Trail-Gear has developed these Rock Assault double-ended ram kits—to meet the tough demands of top-level rock crawling competitors and the toughest trails in the world. Most rams on the market only have one rod seal. Trail-Gear started with the primary and secondary rod seal to insure that fluid leakage would never be an issue. They also included two wiper seals in the design to ensure that dirt and debris stays on the trail—and doesn't invade your steering system. In addition, the ram was designed with a triple-lip piston seal for consistent steering with no drift or fluid bypassing the piston. In true Trail-Gear style, the Rock Assault kits are engineered to be the strongest on the market, so they're designed with a piston wear band and a rod bushing. This bushing allows the rod to absorb much higher side loads. The piston shaft is machined from a single piece of 4340 chromoly. Trail-Gear Rock Assault double-ended ram kits are available with a 6, 8, or 10 in. stroke. The cylinder has a black zinc plated finish, while the rod has 3/4-16 in. female threads on each end.
Not Yet Reviewed
$649.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
