Availability
RideTech 1959-64 GM B-body coilover suspension systems are specifically designed for the Impala, Bel Air, Biscayne, Brookwood, El Camino, Kingswood, Nomad, and Parkwood. They include everything needed to provide a lowered stance with dramatically improved handling and ride quality. Get the benefit of a complete suspension system that takes all of the guesswork out of your upgrade with a RideTech 1959-64 GM B-body coilover suspension kit. Features, items, and specs: * Tubular upper StrongArms feature corrected ball joint angles and are fully assembled with ball joints, injection-molded Delrin bushings and cross shafts; powdercoated satin black * Upper ball joint moved back allowing for additional caster settings for improved speed stability and steering feel * Tubular lower StrongArms feature a double-sheer lower mount for increased strength, and are fully assembled with ball joints, injection-molded Delrin bushings and cross shafts; powdercoated satin black * HQ Series coilovers utilize impact-forged aluminum body and monotube design to deliver excellent ride quality and handling; standard 1,000,0001 mile warranty included * Rebound knob located at top of shock for under hood access; allows fine-tuning of ride quality and handling * Hyperco springs provide consistent spring rate that will last a lifetime * Rear StrongArms provide added strength; utilize R-joint technology to provide smooth operation and reduce roll bind * Lower arms feature a double-sheer mount for coilovers, locating them in place of the stock springs and keeping load where it belongs. * Adjustable panhard bar allows axle to be centered at new ride height * Front and rear MuscleBars replace tiny factory sway bars, where applicable; they feature significantly higher rates, performance end links, and Delrin-lined bushings
( 1 )
$5,145.00
RideTech StrongArm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of RideTech StrongArm tubular control arms; order the kit recommended for your vehicle.
( 17 )
$190.00
—
$1,995.00
The Ridetech complete coilover suspension system for the 1964-66 Ford Mustang includes everything you need to give your vintage muscle car modern drivability. The package contains front upper and lower control arms, tall spindles, steering arms, inner and outer tie rods, front MuscleBar, a bolt-In 4=link system, and four HQ Series coilovers for every corner of your vehicle. The benefit of buying a complete suspension system is that it removes all the guesswork when purchasing a new suspension. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle's performance and ride quality—designed to lower your vehicle. * Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joint have been moved back to allow for additional caster setting to improve high-speed stability and steering feel. Billet cross-shafts are included that feature a lowered mounting point to increase camber gain and correct suspension geometry. They house a stout double sheer lower shock mount. * Lower StrongArms feature a unique design that combines the control arm and strut rod into a stronger, more appealing one-piece design. Additional caster is designed into the arms and includes a robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units. * TruTurn System includes tall spindles which induce more negative camber gain to maximize tire contact patch during cornering. It also includes steering arms, center link adapter, tie rods and adjusters to virtually eliminate bump steer, correct Ackerman angle, and allow for wider tires. Includes heavy-duty frame rail brace. This spindle is designed for use with 1967-69 Camaro brake systems. Compatible with OEM manual steering AND with the Borgeson power steering conversion box. * Optional "Hub" spindles offer the same geometry improvements as the pin spindles, but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * HQ Series coilovers utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling; the rebound knob is located at the top of the shock for underhood access. The shocks come standard with a 1,000,0001 Mile Warranty. Interested in Autocross or Road Course racing? Consider the TQ Series coilovers. * Front MucleBar sway bar helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms. Includes billet aluminum frame straps (anodized black) and low-friction bushings. * Bolt-on 4-link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs. All links are double adjustable with R-Joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is at home on the street as it is on the race track! * Weld-on lower axle brackets are available if using an aftermarket axle housing without stock-style leaf spring pads. (Part number 70010122, sold separately.)
Not Yet Reviewed
$7,670.00
RideTech HQ Series shocks influence your vehicle's handling for better performance. Your shocks are the brains of your suspension, and Ride Tech Q-Series monotube shocks out-think your OEM shocks with a wide rebound adjustment range. This allows you to tune your ride to specific driving tastes. Their larger piston and more efficient oil flow path provide cooler operating temperatures for more consistent performance. Upgrade your factory shocks and enjoy a smarter suspension—with the handling quality of RideTech HQ Series shocks, available in universal and vehicle-specific applications.
( 45 )
$229.50
—
$1,280.00
RideTech 1967-70 Cougar coilover suspension systems include everything you need to give your vintage Cougar modern drivability. These packages contain front upper and lower control arms, tall spindles, steering arms, inner and outer tie rods, a front MuscleBar, a bolt-in 4-link system, and four HQ Series coilovers for every corner of your vehicle. The bolt-on 4-link vastly improves traction, handling, and ride quality. Installation doesn't require any major modifications to the floor pan and requires only minimal welding to the axle tube (works with mini tubs). The R-joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing. RideTech 1967-70 Cougar coilover suspension systems are as comfortable on the street as they are on the racetrack! Features, items, and specs: * Upper StrongArms feature corrected ball joint angles for the tall spindles * Upper ball joint moved back to allow for additional caster setting (improves high-speed stability and steering feel) * Billet cross shafts feature a lowered mounting point to increase camber gain and correct suspension geometry (they house a stout double-sheer lower shock mount) * Lower StrongArms feature a unique design that combines the control and strut rod into a stronger, more appealing one-piece design * Additional caster designed into the arms * Robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units * HQ Series coilovers allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of front coilovers for underhood access) * Front MuscleBar helps reduce body roll and includes PosiLink endlinks that provide immediate engagement between chassis and control arms
Not Yet Reviewed
$6,130.00
RideTech E-coated pitman arms are laboratory tested and proven in the real world. Pitman arm are one of the most commonly worn steering components. Poorly designed joints from the factory quickly loosen and cause excessive play in the steering. Ride Tech steel E-coated pitman arms deliver an improved design providing you with increased longevity and durability.
( 2 )
$45.00
—
$115.00
What a difference a few minutes can make! RideTech control arm bushing kits deliver a direct-fit Delrin system that's easy to install and offers lasting performance. Within minutes, you can swap out all of your control arm bushings for upgrades with the right stiffness, lower friction, and excellent stability—enabling you to take corners with confidence. It's a simple modification with big rewards; replace your old loose, spongy factory rubber bushings with a set of Delrin control arm bushings from RideTech for unrivaled control. Order the kit tailored for your specific vehicle application. RideTech control arm bushing kits feature points: * Bushing design eliminates control arm shift * Reduction in deflection creates more consistent and predictable handling * Trunnion design captures bushings from both sides, increasing strength and rigidity * Designed to resist binding at extreme alignment settings * CNC-machined 4130 chromoly trunnions
( 5 )
$195.00
—
$1,450.00
RideTech offers RQ-S Series shocks for a variety of applications, including many Dodge, Plymouth, Buick, and Cadillac cars and trucks from 1965 and up. They feature a 1.5 in. steel body and monotube design for easy installation and superior performance. With rebound adjustability, they deliver precise tunability, ensuring an unparalleled driving experience and optimal control on road or track. Shock absorbers are without a doubt the brains of your suspension. Nothing influences how your car rides and handles more than its shock absorbers. Their primary function is to control the oscillations of your vehicle's springs, thereby keeping your tires in contact with the road. To best accomplish that objective, RideTech shocks utilize a monotube design which allows for a larger piston and more precise valving. That superior design takes advantage of better damping and reliability over a conventional twin-tube shock design. Ridetech RQ-S shocks include 24-position rebound adjustability, heavy-duty half-inch shock shafts, and carry best-in-industry factory support. Features and benefits: * Steel construction provides durability * Monotube design provides superior damping control, thanks to larger piston and precise valving * 24-position rebound adjustability allows you to dial in the rebound responsiveness of each corner of your ride * Heavy-duty 1/2 in. shock shafts serve to combat against deflection and bending
( 2 )
$185.00
—
$255.00
RideTech subframes deliver several key improvements over the original and some existing aftermarket subframes. Optimized suspension geometry, improved wheel and tire clearance, and rack and pinion steering technology, plus many more features will surely put RideTech's subframes on the top of your builder's wish list. Select the kit with the preferred spindles. Features and benefits: * Optimized geometry provides improved roll center, Ackermann, camber gain, caster and bump steer * Lowers stance 1 to 3 in. and maintains factory track width while increasing wheel and tire clearance * 2 in. more tire clearance per side over stock subframe allows better turning radius with larger tires/wheels * Fits up to 6.5 in. BS with no modifications or reduction in turning radius * Rack and pinion steering upgrade provides improved steering feel, enhancing driver feedback * Modular design is compatible with coilovers or ShockWaves (sold separately) * Subframe features durable powdercoat finish for great, long-lasting good looks and corrosion resistance * Available with AFX pin or late model hub spindle design -- Hub spindle allows install of modern C5/C6 Corvette brakes and C5/C6/C7 hubs (hubs not included) -- Pin spindle is compatible with stock style brakes (including aftermarket kits that fit stock spindle) * One-piece billet 6061 T-6 aluminum upper control arms and steering arms add superior strength * Larger front sway bar controls body roll, improving weight transfer * Tubular lower control arms include eccentric adjustment for caster and camber adjustments * Alignment adjustments are made complete under the car --no adjustments inside engine bay * Multiple motor mount options * Included adjustable transmission crossmember compatible with most popular manual and automatic transmissions * Improved header clearance and exhaust routing allow for a variety exhaust solutions
Not Yet Reviewed
$6,645.00
RideTech E-coated idler arms are laboratory tested and rigorously proven in the real world. The idler arm is one of the most commonly worn steering components. Poorly designed movable joints from the factory quickly loosen and invariably cause excessive play in your vehicle's steering. These idler arms feature improved design over the competition for increased longevity and durability. Take back control of your vehicle's steering with RideTech EDP-coated idler arms. Find the replacement model recommended for your vehicle application.
( 3 )
$45.00
—
$65.00
RideTech offers StreetGrip Delrin® control arm bushings and cross shaft sets as direct replacements for worn factory rubber bushings and control arms on popular GM muscle cars. OE rubber bushings allow too much deflection on the control arms; whereas poly bushings resist smooth rotation and impose stiction. With Delrin® bushings, you get predictable and controlled movement. This allows the shocks and springs to do their intended job of providing suspension compliance, ride quality, and performance handling. Sets include bushings, control arm shafts, and other varying components. Order the set to fit your application needs.
( 1 )
$500.00
—
$625.00
RideTech bolt-on wishbone rear suspension systems replace the factory leaf springs on your truck with improved, handling, ride quality, traction, and load capacity. These heavy-duty wishbone-style systems lowers your truck, improves performance, and include RideTech's patented, long-lasting R-Joints for quiet, smooth, bind-free articulation. These systems are compatible with RideTech coilover and Shockwaves.
Not Yet Reviewed
$1,750.00
Transform your Fox Body's handling with a RideTech 1979-93 Mustang Independent Rear Suspension System. It's no secret that independent rear suspensions (IRS) are superior in almost every way over a stick axle. The biggest concerns are cost and ease of installation. This independent rear suspension system replaces the stock live design with tubular upper and lower control arms utilizing custom-made spindles with S550 Mustang hubs. Camber, roll center, and toe angles were also optimized for greatly increased handling. The bolt-in design requires no welding for installation, as the IRS cradle is designed to mount to the rear frame rails and modified factory mounting points. If you want to optimize the rear suspension of your Fox Body Mustang, do it with this highly engineered IRS system so you can hit the track or street with confidence. Key features and benefits: * High-quality, no compromises manufacturing * Durable powdercoat finish for great looks and corrosion resistance * 100 percent bolt-in design requires minimal modifications * Lowers stance approximately 2 inches—reduces center of gravity without adversely affecting suspension geometry * Reduces upsprung weight creates premium ride quality * Low roll center (5 in.)—one degree of camber gain and zero bump steer inspires confident cornering for improved suspension geometry over OE suspension design and much more enjoyable to drive * 50 percent anti-squat provides excellent traction * Delrin control arm bushings eliminate deflection—no wheel hop, and no noise and no lubrication of bushings required * Retains factory track width * Compatible with mini-tubs (cradle attaches to the inside of the frame rails) * Modular design—works with Ridetech coil-overs or ShockWaves (sold separately), HQ and TQ (Triple Adjustable) versions are also available * Spindles include Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance Fitment Information: * Uses S550 (2015+) Mustang differential (not included)—new units can be purchased from Ford Performance, and Takeout units are also available * Uses shortened S550 (2015+) Mustang axles (not included)—standard strength are available from RideTech * Allows direct bolt-on of both stock SN95 Cobra (1999-2004) or S550 (2015+) rear OE or aftermarket brakes via Ridetech caliper brackets. * Works with 1999-2004 Cobra cat-back exhaust * Requires shortened drive shaft and pinion flange to U-joint adapter (use Sonnax part T35-ALFY-09 or T35-ALFY-10) * Works with Ridetech coilovers or Shockwaves, sold separately * Optional adjustable rate rear sway bar is available for additional fine-tuning
Not Yet Reviewed
$4,500.00
RideTech tie rod sleeves are designed to improve the steering feel and eliminate the flex of the factory tie rod sleeves. These tie rod adjusters are manufactured from billet aluminum and have flats machined into the material for quick, easy adjustments. Available for a variety of applications, RideTech tie rod sleeves are sure to give you much-wanted steering responsiveness. Order the pair recommended for your vehicle.
( 10 )
$85.00
The C4 was introduced in 1984 and continued until 1996. There were over 350,000 sold worldwide. The C4 Corvette continues to be a popular choice among the autocross/track day community. The mix of availability, 4-wheel independent suspension, 96 in. wheelbase, and low entry cost makes these cars a great investment for many auto enthusiasts. If you're searching for help planting your car to the ground, look no further. RideTech offers a variety of systems to update these cars to modern handling track machines! Whether you want to add a few hundred horsepower or are just looking for great ride quality on your way to church…Ridetech has you covered. RideTech C4 Corvette rear lower control arms feature: * Incorporates Delrin bushings and R-Joint technology * Eliminates deflection, compared to factory rubber, maintaining consistent alignment for precise handling * Eliminates added stiction associated with rubber and polyurethane * Retains factory camber adjustments via cam bolt * Satin black powdercoat finish
Not Yet Reviewed
$330.00
Tune up your chassis with RideTech TruLink rear suspension systems and achieve significantly better handling and launch characteristics, along with dramatically improved ride quality and service life. The comprehensive system features heavy-duty tubular control arms equipped with patent-pending R-Joints plus application-tuned HQ Series adjustable shock absorbers. TruLink replaces your car's flex-prone stamped upper and lower control arms with precision-welded tubular steel StrongArms constructed from heavy-duty 1.5 in. O.D. DOM steel tube. The end result is less flex for more predictable handling and launch characteristics. StrongArm rear trailing arms are precision welded at our Jasper, Indiana factory and then powder-coated for long-lasting appearance. RideTech installs patent-pending R-Joint rod ends and bearings for noise-free, high articulation movement with zero stiction. R-Joints eliminate the binding, stiction, noise and vibration associated with poly bushings offered in most aftermarket control arms. R-Joints never need lubrication and have exceptional wear resistance. For ultimate articulation, the TruLink system features press-in R-Joints for your axle to upper control arm attachment points. This critical feature is often overlooked in the upgrade process. The final piece in the TruLink system is a pair of RideTech HQ Series adjustable monotube shock absorbers. They are custom-valved specifically for your vehicle's platform with modern tires. RideTech provides rebound adjustment to help you fine tune compliance. With a few turns of the adjusting knob, you can tune rebound damping to suit both your car's needs and your personal preferences. RideTech HQ Series shocks offer an industry-exclusive 1,000,001 mile warranty. RideTech is confident that TruLink is the most comprehensive bolt-on rear suspension system ever offered. It's also the most versatile design on the market. As your needs and budget grow, you can add matching HQ Series front shocks, StreetGRIP high performance coil springs and an adjustable MuscleBar™ rear sway bar. Down the line, you can upgrade to adjustable coilovers or Shockwaves with matching TruTurn front suspension.
Not Yet Reviewed
$1,335.00
RideTech 2019-25 Silverado/Sierra 1500 suspension lowering kits will turn your vehicle into a high performance muscle truck with a better stance, handling, and ride quality. Offered for 2WD and 4WD drivetrains and with Group A axle flip bracket, Ridetech lowering kits are 100 percent bolt-on and fully adjustable. Each kit includes front HQ Series coilovers, tubular upper control arms, rear HQ Series shocks, shock angle correction brackets, flip brackets, adjustable shackles, and heavy-duty hangers. Choose the proper kit for your truck. Component features and benefits: * Front HQ Series coilovers allow for a 1 to 3 in. lowered stance (2 in. optimal) and are a direct replacement for factory shock and spring. They utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling via the rebound adjustment knob with 24 positions of adjustment. Premium Hyperco springs are used that are CNC cold-wound with high-tensile steel. * Upper StrongArms correct the camber and ball joint angles to allow proper wheel alignment. They are fully assembled with ball joints and bushings and are powdercoated satin black. * Rear HQ Series shocks are also rebound adjustable and include brackets to correct the shock angle at the lowered stance more maximum effectiveness. * The rear 4 in. lowering kit includes axle flip brackets (Group A axle type), stout front leaf spring hangers, and adjustable shackles to fine-tune the stance. * Group A axle housing types: -- 10-bolt axle (found on early W/T) has 10 cover bolts -- 12-bolt GM 9.50 in. axle (aluminum) has 12 cover bolts, non-magnetic differential housing * Optional components are available separately to help eliminate wheel hop, provide extra load capacity, and improve cornering.
Not Yet Reviewed
$3,315.00
The C4 was introduced in 1984 and continued until 1996. There were over 350,000 sold worldwide. The C4 Corvette continues to be a popular choice among the autocross/track day community. The mix of availability, 4-wheel independent suspension, 96 in. wheelbase and low entry cost makes these cars a great investment for many auto enthusiasts. If you're searching for help planting your car to the ground, look no further. RideTech offers a variety of systems to update these cars to modern handling track machines! Whether you want to add a few hundred horsepower or are just looking for ride quality on your way to church…Ridetech has you covered. RideTech C4 Corvette rear trailing arms feature: * Upper and lower, double-adjustable trailing arms, featuring R-Joint technology * Eliminates deflection, compared to factory rubber, for high-horsepower applications * Reduced NVH (noise and vibration harshness), compared to Heim ends * New Grade 8 hardware * Satin black powdercoat finish
Not Yet Reviewed
$810.00
Ridetech, a leader in air and coil-over suspension systems for more than 30 years, proudly announces the launch of its MOMENTUM chassis kits. This all-new platform gives classic muscle car enthusiasts a clean-slate foundation for their next project—delivering modern handling, increased performance, and design flexibility beyond the limits of factory frames. Builders can now enjoy the benefits of a fully engineered chassis while tailoring the suspension to their preferred style of driving, whether that's comfortable street cruising, high-performance autocross, or full track use. Key engineering highlights include: * RideTech's MOMENTUM Chassis Series is a new platform for classic muscle cars, offering modern handling, optimized suspension, and modular options, initially for 1968-1972 models * Optimized suspension geometry—the chassis re-engineers pickup points to improve camber gain, caster, roll center, and Ackermann steering geometry * Enhanced stability—the chassis is significantly stiffer than a stock frame, which reduces flex and increases structural rigidity for more predictable handling * Improved cornering—a new integrated sway bar helps reduce body roll and improve balance, leading to sharper cornering and greater stability * Confidence-inspiring control—the design provides improved handling for both daily driving and more demanding situations like autocross or track events * Increased tire and wheel clearance—the chassis is engineered to accommodate larger, modern wheel and tire sizes that would not fit on a factory chassis * More aggressive fitment—allows for wider tires (e.g., up to 275mm front and 295mm rear) with room for larger fitments, especially when combined with mini tubs in the rear * Adjustable ride height—the system allows for roughly a 2-inch drop from stock but can be adjusted to the desired ride height * Kit offers modular suspension options that allow for air or coilover setups * Chassis is compatible with existing Ridetech A-body suspension components * Engine and transmission flexibility provides provisions for various motor mount plates (small block Chevy, Olds, Pontiac, Buick, GMLS, or Gen 5 LT) and features an adjustable crossmember that adapts to popular automatic and manual transmissions
Not Yet Reviewed
$19,500.00
—
$19,650.00
RideTech 1979-93 Mustang bolt-in SLA (Short-Long-Arm) front suspension systems replace the stock McPherson strut design with a billet aluminum upper control arm, tubular lower arm and spindles with S550 Mustang hubs. The factory strut design offers very little camber gain and poor overall geometry. This design greatly improves negative camber gain, which positions the tire perpendicular to the pavement through the corners without the need for excessive static camber and overly stiff spring rates. Caster, roll center and Ackerman angles were also optimized. These suspension systems are compatible with either Ridetech coilovers or Shockwave air suspension (sold separately). SLA front suspension systems are available in two fitment styles: * To fit STOCK K-Members (except 84-86 SVO) * To fit many AFTERMARKET K-Members, including Maximum Motorsports, Team Z, AJE and UPR Additional product features: * Incorporates an upper control arm to induce much-needed negative camber gain * Caster, roll center, bump steer and Ackerman angles are optimized * Bolt-in frame surrounds create attachment points for the upper control arms and the shocks. This keeps the load on the frame rails for maximum strength and reduced NVH * Upper and lower arms feature Delrin© bushings infused with PTFE to minimize stiction and eliminate the need for lubrication * Spindles include Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance * Lower control arm design improves tire clearance and steering angle 30 degrees with up to a 275mm wide tire Fitment: * Uses S550 (15-23) or SN95 (94-04) Mustang brake systems (caliper brackets sold separately) * 17 in. minimum wheel diameter * Compatible with stock and most aftermarket sway bars Specifications: * Negative camber gain: 1.25 degrees/in. * Positive caster: 7-9 degrees * Bump steer: under .050 in. * Lowers ride height: 1-2 in. * 50 lbs. lighter than stock suspension * Stock track width
( 1 )
$3,300.00
Equally important when upgrading suspension components, especially for track use or spirited driving, are the sway bars. The last thing you want to encounter when corner-carving in your Mustang is excessive body roll. RideTech's 2015-24 Mustang sway bars, available for front or rear, are larger in diameter and adjustable, making them ideal for harnessing a muscle car's desire to roll-over during a cornering event. A car handles best when it can negotiate low, mid, and high-speed corners as flat as possible. Ridetech S550/S650 Mustang sway bars feature the right material design and bar rate making for a flatter handling car and come with a high payoff in handling performance improvement despite their relative ease of installation. Their adjustability makes them suitable for the street car that sees occasional driving at the local autocross or weekend track day on up to the dedicated competition muscle car setup to dominate at higher levels of competition. Choose the RideTech 2015-24 Mustang sway bar desired for your car, or pair a front and rear for added tunability. Additional features: * Front sway bar is 2-position adjustable * Rear sway bar is 3-position adjustable * Reuses factory end-links to connect sway bar to suspension * Black satin powdercoat finish for corrosion resistance and durability
Not Yet Reviewed
$295.00
Update your 1988-96 C4 Corvette with a Ridetech StreetGrip suspension system. The 100 percent bolt-on kits feature adjustable monotube shock absorbers, heavy-duty sway bars, and self-lubricating Delrin control arm bushings. Ridetech's excellent HQ Series shocks are custom-valved to complement your Corvette's factory springs for modern handling and ride quality. With impact-forged aluminum bodies and heavy-duty steel shafts, the shocks carry a 1,000,001-mile warranty. You can fine-tune performance by way of precision rebound adjusting knobs. Ridetech's CNC-bent MuscleBar sway bars increase bar rate over stock. MuscleBars feature innovative investment-cast bar ends that perfectly engage end-link bushings as your Corvette's cornering loads change. Delrin-lined sway bar mounting bushings never squeak or need lubricating. A set of Delrin A-arm bushings greatly reduce deflection during cornering, eliminate stiction, and are maintenance-free. If you love your C4 Corvette, but wish for better ride quality and handling, you'll be thrilled with Ridetech's bolt-on Streetgrip suspension system.
Not Yet Reviewed
$2,470.00
RideTech 2019-25 Silverado/Sierra 1500 suspension lowering kits will turn your vehicle into a high performance muscle truck with a better stance, handling, and ride quality. Offered for 2WD and 4WD drivetrains and with Group B axle flip bracket, Ridetech lowering kits are 100 percent bolt-on and fully adjustable. Each kit includes front HQ Series coilovers, tubular upper control arms, rear HQ Series shocks, shock angle correction brackets, flip brackets, adjustable shackles, and heavy-duty hangers. Choose the proper kit for your truck. Component features and benefits: * Front HQ Series coilovers allow for a 1 to 3 in. lowered stance (2 in. optimal) and are a direct replacement for factory shock and spring. They utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling via the rebound adjustment knob with 24 positions of adjustment. Premium Hyperco springs are used that are CNC cold-wound with high-tensile steel. * Upper StrongArms correct the camber and ball joint angles to allow proper wheel alignment. They are fully assembled with ball joints and bushings and are powdercoated satin black. * Rear HQ Series shocks are also rebound adjustable and include brackets to correct the shock angle at the lowered stance more maximum effectiveness. * The rear 4 in. lowering kit includes axle flip brackets (Group B axle type), stout front leaf spring hangers, and adjustable shackles to fine-tune the stance. * Group B axle housing for: -- 12-bolt 9.76 in. axle (steel) has 12 cover bolts, magnetic differential housing -- 12-bolt AAM 9.50 in. axle (aluminum) has 12 cover bolts, non-magnetic differential housing * Optional components are available separately to help eliminate wheel hop, provide extra load capacity, and improve cornering.
Not Yet Reviewed
$3,315.00
RideTech bolt-on 4-link systems provide a lowered ride height with smooth handling. They include the link bars with rubber bushings, powdercoated brackets, and optional front upper or lower controls arms, depending on the vehicle application. The suspension systems require no welding or cutting, making installation easy. Order the kit designed for fitment on your year/make/model.
( 8 )
$1,825.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
