Availability
Flaming River Microsteer electric power assisted steering kits can easily be fitted to virtually any vehicle where manual steering currently exists. There's no need to change your steering rack or fit a hydraulic system. These kits allow you to adjust the amount of assistance by using a rotary potentiometer—or you can make the system speed sensitive by connecting a wheel speed signal to the tuning box. A mode selection switch on the box allows you to choose your preferred method—manual or wheel speed. Flip the switch and make your vehicle easier to steer or boost the horsepower a bit with a Flaming River Microsteer electric power assisted steering kit. Items and notes: * Motor/gearbox unit (MGU) * Electronic control unit (ECU) * Tuning box * Wiring harness * 11/16 in.-36 input and output shafts
( 3 )
$1,799.99
—
$1,944.99
Flaming River manual rack and pinions are built from lightweight aluminum castings—and feature chrome plated center tubes and two mounting holes. Designed to meet the standards of professional street rod and race car chassis builders, they weigh less than 15 lbs. each. These rack and pinions are a great way to streamline the engine compartment while maintaining smooth, responsive steering.
( 54 )
$305.99
—
$1,282.99
Flaming River 1988-98 Chevy C1500 truck power rack and pinion cradle kits are direct bolt-ins with precision welded cradles manufactured using a 3/8 in. steel plate to assure there is no flexing. Each kit adapts to the original steering column and includes a new slip shaft with U-joints and a hose kit. They have been designed for use with the original power steering pump and the travel bar maintains original geometry. Features: * Designed for use at factory ride height or with 4/6 lowering kit * Solid plate 3/8 in. steel for increased strength * Bolts in place of steering box and idler arm using OE mount locations * Precise, modern steering with no cutting, drilling, or welding to chassis * Features new front steer power rack and pinion * Rack and pinion features .98 in. rack shaft for increased strength * Billet servo valve for cooler operation * Lifetime serviceability and Flaming River tested and certified Power rack and pinion cradle kit includes: * Mounting hardware * Universal joints and shafts * Rack and pinion cradle system
Not Yet Reviewed
$2,508.99
Flaming River 1955-57 Chevy power rack and pinion cradle kits make your dream ride a dream to drive! Flaming River makes your classic even better with their unique and easy-to-install cradle kits. The true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location--no suspension modifications are needed. Plus, by mounting the rack on the cradle system, you are reinforcing the Chevy chassis and providing increased ground clearance. Kits are available without columns or with your choice of polished or paintable tilt columns--something your '57 never had! Tri-five Chevys are probably some of the most recognized American classics, and to restore one is many an enthusiast's dream. Give your 1955-57 Chevy perfect modern steering from Flaming River 1955-57 Chevy power rack and pinion cradle kits.
( 4 )
$1,854.99
These Flaming River Mustang power rack and pinions are perfect for street rods, musclecars, and as stock replacements in Ford products that use the Mustang II front steer design. They offer over 6 in. of rack travel, which provides the maximum turning radius for classic and street rod applications. Inside, the pinion gear set is improved over the OE factory design and is engineered to provide ultimate strength characteristics. Outside, they are significantly different from previous designs. The Flaming River Mustang II power rack and pinions use a billet aluminum spool valve housing with a heat sink design for lower operating temperatures. They also feature a longer rack piston tube for added strength and increased rack stability. Their low-profile pressure hose design reduces most installation obstacles. They are light, yet strong, weighing 12 lbs. less than the original stock cast racks. Available with a matched, speed-sensitive power steering pump with V-belt or serpentine pulleys, the Flaming River Mustang II power rack and pinions make an excellent steering choice for your ride.
( 10 )
$664.99
—
$1,229.99
Flaming River can equip your vehicle with a steering gear box—whether you own a muscle car, race car, or vintage ride. These units are constructed from totally new components and feature improved designs. Needle bearings, precision worm and nuts, stronger casting designs, and quicker ratios are just a few of the great features found in these steering boxes. They're available in a variety of styles, steering ratios, spline sizes, and other options. Order the model recommended for your application.
( 22 )
$275.50
—
$1,304.99
Flaming River 1965-70 Mustang power rack and pinion cradle kits can upgrade your classic Pony's steering system. The patented conversion kits are stronger, lighter, and more responsive. They also retain the full factory turning radius and offer more travel than your OE system! Mustang power cradle kits feature a welded cradle that bolts right in—no cutting, drilling, or welding is required! They're available to fit with the original or Granada spindles, and come with or without columns that are paintable or polished. Each kit also includes mounting hardware, wiring connectors, universal joints, a power steering pump, a billet bracket and pulley, and a polished aluminum reservoir. All are fluid and pressure-tested before shipping. Order the model recommended for your Mustang application.
( 8 )
$2,019.99
—
$3,374.99
Flaming River VDOG variable angle gears have a strong aluminum housing—available in either cast or billet—and the output shaft is 3/4-36 in. for compatibility with universal joints. Each unit is gear driven without any chains or sprockets. It can be mounted in horizontal or vertical positions—ideal for cab-over vehicles, T-Buckets, and specialty builds with big motors and tight firewall clearance. Order the material and finish you prefer. Additional features: * 90 degree gear box with a 35 degree variable angle shaft * Articulating ball design for maximum adjustability * 1:1 ratio to maintain rack and pinion or steering box gear ratio * Award-winning: 2019 SEMA Best Engineered New Product and Best New Street Rod Product
Not Yet Reviewed
$836.99
—
$1,489.99
Flaming River Billet-Joint steering universal joints are CNC-machined from aircraft-quality billet steel to precision tolerances. They feature a sealed, needle-bearing design that will outlast normal steering joints, while providing positive steering response with no backlash. The U-joints are available in a variety of styles, finishes, and shaft end configurations. Order the model suitable for your application.
( 163 )
$82.50
—
$326.99
Ideal for your steering system, these DD-type intermediate steering shafts from Flaming River can be cut to any length, eliminating the need to pre-measure. They're manufactured from pre-ground alloy steel for strength and cosmetics.
( 29 )
$49.99
—
$409.99
These Flaming River cast front steer power rack and pinions are manufactured using all-new components, including the cast valve and piston. They are designed to fit any classic front steer vehicle where the rack mounts in front of the spindles. They are available in different lengths and have an optional power steering pump and pulley assembly available.
( 1 )
$825.99
—
$904.99
Flaming River offers a variety of low-profile single or double-joint needle-bearing chromoly U-joints. These steering components are designed and manufactured to outlast pin-and-block universal joints in racing applications. They have a reduced diameter for vehicles where clearance and weight are primary concerns, and they do not require lubrication. Order the style, size, and finish you prefer. Features include: * Black oxide finish for corrosion resistance * 400 ft./lbs. strength rating * Accommodates up to a 35 degree angle for the single joint and up to 80 degrees for the double
( 22 )
$78.99
—
$362.99
Flaming River 1963-66 Corvette power rack and pinion cradle kits improve horsepower, performance, and road handling. The kits include hardware, universal joints, cradle, and quick-ratio rack and pinion. The all-new components bolt into existing chassis and original mounting locations with no suspension modification, providing a stronger rack shaft, a longer cylinder and overlapping tube design, and more than 6 in. of travel for full-turning radius.
( 1 )
$2,486.99
Flaming River offers all-new replacement front steer power rack and pinions for the 1994-2004 SN-95 Mustang. They feature precision robot-welded design for strength, durability, and direct fit. Their diecast housing offers the same line position as OEM and adjustable pinion housing for easy installation. These rack and pinions are popular with many of the top chassis builders. Additional details: * All new components, including valve, piston, seals, bearings and bushings, and pinion and rack gears * Same line position as original 1979-93 Mustang * Stainless steel braided hoses * Full turning radius and 6.00 in. of travel * 12:1 ratio / 2.7 turns lock to lock * Fluid and pressure tested and certified before leaving the factory
Not Yet Reviewed
$1,081.99
Flaming River stainless steel U-joints are constructed from carefully selected 303 grade stainless for its strength, superior corrosion resistance, and shine. The steering components have such a precision-machined finish that looks great right out of the box—natural, polished, or satin. These U-joints are available in standard and double-joint styles, with dozens of shaft end configurations. Order the model suitable for your application.
( 38 )
$119.99
—
$362.99
Flaming River 2015-20 Mustang manual rack and pinions are a great way to streamline the engine to the compartment while maintaining smooth, responsive steering. They're lighter than the OEM EPAS (electronic power assisted steering) S550 Mustang power systems, and depending on specifications, will reduce vehicle weight by 10 to 15 lbs. by eliminating hoses, pulleys, and pumps. Plus, they have billet aluminum mounting brackets that can also be adjusted to modify the pinion angle for large tube headers and engine swaps in custom applications.
Not Yet Reviewed
$993.99
Flaming River Mustang steering shafts utilize two smooth needle-bearing universal joints, a prefabricated shaft that bolts directly to the OEM column, and a weldless intermediate shaft for easy installation. This design eliminated the rag joint for better steering response and appearance. Some of these shafts are available in steel and aluminum for power or manual rack and pinions.
( 22 )
$291.99
—
$832.99
Whenever a steering system contains three joints, a double universal joint, or a vibration damper, a support bearing is necessary. Flaming River support bearings will fit any 3/4 in. shaft with either splined or DD ends. They're available in a variety of styles, sizes, materials, and finishes. Choose the model best suited for your application.
( 11 )
$49.99
—
$224.99
Flaming River inner tie rods are available for multiple applications—such as those with the cradle kit, factory racks, or Omni manual rack. They're made of superior-quality materials to ensure long-lasting durability and performance. Order the model recommended for your vehicle and engine family.
( 6 )
$52.99
—
$94.99
Flaming River 1965-70 Mustang manual rack and pinion cradle kits steer your classic with the benefits of modern steering systems. Durable, lighter, and more responsive, these cradle kits add strength and support, while offering an improved turning radius. Flaming River includes everything you need to install them, and the welded cradle bolts right into the original mounting locations--no chassis modifications needed. Kits are available with or without columns and all include wiring connectors, universal joints, shaft support bearings, Grade 8 hardware, and their patented rack and pinion cradle system. Update your Pony with comfort from the most complete rack and pinion kits--Flaming River Mustang manual cradle kits.
( 5 )
$1,796.99
—
$3,124.99
Flaming River 1967-68 Camaro power rack and pinion cradle kits can upgrade the steering system on your classic musclecar! These direct bolt-on systems are stronger, lighter, and more responsive than original equipment. Like Flaming River's manual setup, the power rack and pinion provides a quick steering ratio with full turning radius. The units install using the existing chassis locations on late '60s Camaros and Firebirds. They're available with or without the steering column.
( 1 )
$2,339.99
—
$2,706.99
Reduce weight and streamline your Mustang's engine compartment with Flaming River 5.0L Mustang manual rack and pinions. They're ideal for road and drag racing and other applications where a very responsive steering system is required. They are manufactured to be sleek, lightweight, and durable with quality aluminum castings and a chromed plated steel tube center.
( 1 )
$546.99
—
$604.99
Flaming River cast rear steer power rack and pinions are manufactured using all-new components, including the cast valve and piston, and are designed to fit any classic rear steer vehicle where the rack mounts behind the front spindles. They are available in different lengths and have an optional power steering pump and pulley assembly available.
( 2 )
$815.99
—
$1,227.99
Flaming River rack and pinion bellows are designed to keep dirt, dust, and other contaminants out of your steering components. Manufactured from high-density rubber, they stretch and move as the steering wheel is turned. Perfect for your street rod or daily driver, the bellows are available in universal and vehicle-specific applications. Order them individually or in a kit.
( 18 )
$24.99
—
$77.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
