Availability
Artec Industries universal link bushings are the perfect multi-functional product for your fabrication needs. Whether you are using these link bushings for suspension joints, motor mounts, or any number of other uses, the Artec Industries universal link bushings are built with strength in mind.
( 1 )
$26.49
—
$28.99
You can now custom build your project like you want using Artec Industries steel D.O.M. tubing. This convenient steel tubing is Drawn Over Mandrel and has tighter wall thickness tolerances. D.O.M. tubing is available in precut lengths. Choose the diameter and thickness you need to start your build.
( 8 )
$109.99
—
$149.99
Mount your lower control arms using heavy-duty replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for strength and have grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower control arm brackets to be mounted at an angle on the frame without excess material hanging off the side. Choose the style needed to mount front or rear control arms on your specific vehicle.
( 13 )
$76.99
—
$168.29
Artec Industries inner C gussets are designed to take serious abuse while reinforcing your front inner C's. They're precision-machined from 1/4 in. thick steel and pre-formed to fit. The heavy-duty design of these gussets provides valuable stability to areas prone to flex during high abuse conditions. Order the brackets recommended for your specific application.
( 6 )
$97.89
—
$102.29
Artec Industries provides a choice of track bar brackets to meet your needs for your application. Their selection includes raised or stock styles for front and rear axles. They are heavy-duty 1/4 in. thick precision-cut and formed components designed to take serious abuse and replace your front 30 or 44 JK factory track bar bracket. Some improve ground clearance and some improve link geometry, but all Artec track bar brackets are superior to your factory parts.
( 2 )
$87.99
—
$100.00
Artec Industries misalignment spacers are great for use on any Heim that has a 7/8 in. bore that's being installed in a location where space is limited. They are also great for using in steering applications. Get your high-end misalignment spacers from Artec Industries.
( 1 )
$18.69
—
$21.99
Artec Industries offers a variety of shock mount tabs, from flat linear brackets to offset styles. These durable welding tabs are CNC laser-cut from 1/4 in. high-strength steel—and available in different lengths and curvatures to accommodate most standard tubing width applications.
( 4 )
$13.19
—
$14.29
Finding the proper fasteners in your local hardware store can be a challenge—especially for automotive purposes. Instead, simply order Artec Industries high steer stud kits, the OE-style replacements needed for your Dana axle. Most of these steel studs have a black oxide finish, fine threads on both ends, and offer tensile strength up to 220,000 psi. (Some kits also include nuts and/or conical washers.) Remember, stock bolts are typically too short for high steer applications. Artec studs are sold individually or in multi-pack sets.
Not Yet Reviewed
$108.00
Artec Industries Easy 4-Link bracket sets provide one of the simplest ways to get your links done. The kits are based off popular parts for a single-or dual-triangulated 4-link suspension with angled upper control arms and straight or very slightly angled lowers, depending on your application. A-kit brackets allow for separate upper and lower mounts on the frame side for customizable 4-link setups. The B-kit brackets are combined for easy setup and upper mounts allow for adjustability. The C-kit brackets allow for lowers that can attach to a crossmember under the transfer case and uppers that attach on inside of frame rails. Order the Artec Easy 4-Link bracket kit that best fits your suspension application.
Not Yet Reviewed
$428.99
Artec Industries JMX Series rod ends are an ideal way to add strength, reliability, and flexibility to any situation requiring use of a rod end, such as suspension or steering applications. The JMX Series rod ends utilize a high-strength, heat-treated 4130 chromoly body with silver zinc finish and a PTFE liner for smooth operation. Artec Industries premium 3-piece JMX rod ends remain quiet and tight for years of usability. More features: * Ball is made from heat-treated bearing steel for strength and hard-chrome polished for a smooth surface * Race is a heat-treated alloy steel helping the joint outlast normal budget rod ends with an injection molded race
Not Yet Reviewed
$36.29
—
$49.49
Clean, low-profile lines and a high-clearance design make these Artec Industries shock mounts strong parts when installed. The heavy steel units are designed to replace your worn shock brackets. They require welding onto the side of the axle tube to install, and will handle some serious abuse. Artec universal high-clearance shock mounts are a great addition for all-wheelers, due to their beefy strength and protection of the shocks.
Not Yet Reviewed
$59.99
Artec Industries rod end kits are a great way to add strength, reliability, and flexibility to any situation requiring rod ends—like suspension or steering applications. They utilize high-strength chromoly bodies with a polished chrome finish that's sure to impress. The ball is made from heat-treated bearing steel for strength and hard chrome polished for a smooth surface. The race is injection-molded nylon which keeps the joint quiet and tight for years of usability. Artec Industries rod end kits are available on right or left hand threads and great for the builder on a budget. Kits include: * 3/4 in.-16 tpi chromoly rod end with 3/4 in. bore * Jam nut * Tube adapter for 1.0 to 1.5 in. O.D. tubing * 2 stainless steel high-misalignment spacers
( 1 )
$47.29
—
$93.49
Artec Industries offers Ultimate 60 high steering arm fasteners for a variety of Dana 60 axle applications. These knuckle bolt kits work well with Artec's Ultimate 60 high steer arms to increase overall knuckle and steering strength—as well as provide options for mounting your steering. Whether you just need to reinforce your knuckles, or want to run your tie rods in double shear, these kits are designed to fit multiple steering configurations. Two kits are required for a pair of high steer arms, and cutting the sleeves in half is necessary to run Heim joints in double shear. Tie rod end holes on the knuckle need to be drilled to 3/4 in. diameter. Order the model that's best suited for your application. Features include: * 3/4 in.-16, 10 in. long, Grade 8 bolt * 3/4 in.-16 all-steel mechanical locknut, the best type of locking nut for steering applications * Machined 1.25 in. O.D., 0.250 in. wall DOM sleeve * Sleeve ends machined for 3/4 in. Heim joints in double shear * Choose your tie rod mounting height * Available for OEM Ford, OEM Chevy, OEM Dodge, and all aftermarket knuckles Important safety notes: * Requires basic steel cutting tools for installation; use caution when cutting steel * Only experienced fabricators should attempt these modifications * All-steel mechanical locking nuts are designed NOT to be reused to ensure the nut does not loosen over time; always use a new nut if you remove it
Not Yet Reviewed
$58.29
Artec's new shock tower mounts are a much better fit, function, and look than a tubular shock tower. They're the strongest and easiest way to mount your shocks, coilovers, air shocks, or struts. These brackets are CNC laser-cut and bent from 1/4 in. steel, will mount with two boxed tabs, and will adjust to any mounting width.
Not Yet Reviewed
$259.99
—
$269.99
Artec Industries rear TJ coil spring perches and retainers are designed for use with the Artec TJ axle truss or modular truss axle swap applications. They precisely locate the coil springs in the factory location, and are clockable to any angle for larger suspension lifts. The coil spring perches and retainers are CNC laser-cut and bent from 1/4 in. thick steel, and include the tubing spacers and mounting hardware. Order the model recommended for your Jeep application.
( 5 )
$109.99
—
$214.49
Artec Industries upper truss link mounts are designed to mount on a flat surface. They're precision CNC-cut and bent from 1/4 in. thick mild steel. The bend strengthens each bracket so that no additional reinforcement is needed. Artec upper truss link mounts are available in different widths to accommodate the most common joints. Hole size comes standard at 9/16 in., but can be drilled out to up 1 in., if necessary.
( 1 )
$46.99
Whether you're just starting out with crossover steering or going full hydro, these Artec Industries Ultimate 60 high steer arms are meant to handle it all—and provide you options as well! Rather than use the factory kingpin springs, the knuckle is held together with a springless design that uses a set screw to adjust the torque required to hold together. This eliminates some of the slop commonly found in axles after moderate off-road abuse. The hardware for a springless conversion is included, and consists of a 3/4 in. set screw, jam nut, grease zerk, 1/4 in. thick load washer, and upper kingpin bushing for each arm. The Artec Industries Ultimate 60 high steer arms are machined blank to allow custom tie rod and draglink locations. The knuckle bolt hole is not machined into the high steer arm because the factory hole location in every knuckle is different; thus, to fit your knuckle perfectly, the holes need to be drilled according to the knuckles they will attach to. Artec high steer arms are CNC-machined from 1 1/4 in. thick 1018 cold roll steel and then zinc plated for corrosion protection.
Not Yet Reviewed
$472.99
Artec Industries adjustable panhard mounts allow for different levels of drop to fine-tune your suspension. These steel mounts are for use with any 3 or 4-link suspensions and may require trimming to fit. Most will need to be welded securely into place. For a well-aligned suspension, use Artec Industries adjustable panhard mounts.
( 4 )
$43.99
—
$69.99
Mount your lower link arm to the frame using these strong replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for durability and include grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower link frame brackets to be mounted at an angle without excess material hanging off the side. Not only do these brackets look better and more natural to the frame, but they also ensure less bracket sliding on the rocks and getting in the way.
( 4 )
$49.99
Mount up your links using a set of Artec Industries adjustable dual 4-link brackets. They're made from 1/4 in. thick steel plate and come unwelded. These chassis brackets feature a height-adjustable top plate, 25 degree angle on the upper holes, 10 degree angled out lower holes, adjustable-width lower holes, and a skid plate to protect the joint location. Artec adjustable dual 4-link brackets use an L-shaped inner tap for higher strength, and are cut out for pass-through plumbing and electrical connections.
Not Yet Reviewed
$249.99
Make your axles more robust; swap a 1-ton front or rear axle into your Jeep with Artec Industries axle swap kits. They provide a heavy-duty truss and bracket system designed to take serious abuse and reinforce your entire axles. The components are precision CNC-cut and bent, all the necessary brackets are included, and the overall low-profile design means your axles are stronger, sleeker, easier to install, and less likely to interfere with vehicle components.
Not Yet Reviewed
$604.99
—
$637.99
Artec Industries' new JK heavy-duty crossmembers are designed to give your Jeep Wrangler JK better protection beneath the vehicle than the stock unit. Designed using CAD files directly from the manufacturer, these heavy-duty reinforcements ensure that you have a great fit with factory components. Made from CNC-cut and formed 1/4 in. thick steel, the JK heavy-duty crossmembers will hold up to plenty of off-road abuse. They enable you to mount longer arms for greater stability and flex. All nuts are pressed into the brackets for easy removal and installation; the crossmembers use 2.625 in. wide joints or bushings with 9/16 in. holes; they're shipped bare so you can custom finish it however you want. Order the model recommended for your Jeep application.
Not Yet Reviewed
$516.99
—
$571.99
Artec Industries large 4-link crossmember brackets allow for triangulated lower links that meet at a 1.75 in. O.D. round tube or 2.00 in. square tube crossmember between frame rails (depending on model). They're made for use with large joints that have a 2.625 in. mounting width. The hole size is 9/16 in., but can be drilled for larger sizes. Angles are set at 22 degrees each (44 degrees total) to allow use with Artec's angled lower link axle brackets. These large 4-link crossmember brackets are made from 1/4 in. thick steel and come in six unwelded pieces that jig together for easy assembly.
( 1 )
$114.99
Get your rod ends attached to the chassis the right way. These Artec Industries chassis tube adapters feature full-length threading for a positive thread engagement—and wrench flats keep a smooth appearance while providing simple adjustments. Their beveled edge makes them easier to weld with no grinding, and the outer diameter matches the thick wall tubing for an ultra-sleek look.
Not Yet Reviewed
$25.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
