Brake Systems
Availability
Because stopping is just as important as going fast, Summit Racing is your performance brake authority. We have everything from dependable stock replacement brakes for...
Because stopping is just as important as going fast, Summit Racing is your performance brake authority. We have everything from dependable stock replacement brakes for daily drivers to advanced systems and line lock kits for racing vehicles. Rotors, calipers, brake pads, master cylinders and boosters, brake lines and fluids, vacuum pumps and canisters, proportioning valves, and even drum-to-disc conversion kits are all here, all available for a wide variety of vehicles, and all at the lowest prices, guaranteed. Don’t forget a handy brake bleeder kit to help finish your new brake job!
Because stopping is just as important as going fast, Summit Racing is your performance brake authority. We have everything from dependable stock replacement brakes for daily drivers to advanced systems and line lock kits for racing vehicles. Rotors, calipers, brake pads, master cylinders and boosters, brake lines and fluids, vacuum pumps and canisters, proportioning valves, and even drum-to-disc conversion kits are all here, all available for a wide variety of vehicles, and all at the lowest prices, guaranteed. Don’t forget a handy brake bleeder kit to help finish your new brake job!
Showing In Stock Items. Show All 65 Items.
Wilwood EPB caliper switch kits are momentary on, 3-position switches used with Wilwood's Electronic Parking Brake calipers and brake kits. They include plug, a 6-lead pigtail for wiring, and EPB switch sticker with peel-off adhesive and screenprinted ON-OFF.
Not Yet Reviewed
$58.15
OER Authorized park brake lamp switches meet or exceed stringent OER quality control standards. Designed for use on a wide variety of GM models, these reproductions mount on the parking brake lever to activate the park lamp on your dash.
( 1 )
$23.79
Make use of your exhaust brake with BD Diesel manual shift lever exhaust brake switch kits. These BD Diesel switch kits are designed to use your engine's exhaust pressure to slow down your truck without braking as much. The kits include a switch and a wiring harness to clamp onto the shift lever of your manual transmission. Add an optional power switch for your exhaust brake from BD Diesel.
( 4 )
$82.95
These Lokar emergency brake warning indicator switch kits are designed for use with Lokar floor mount hand brakes. They include a microswitch, a warning indicator trigger, an e-clip and pin, two electrical terminals, and two stainless steel mounting bolts.
( 3 )
$60.95
Summit Bucks
Faulty parking brake switches can prevent the warning light from letting you know the parking brake is still engaged. This can be dangerous. Replace your faulty switch with ACDelco GM Genuine Parts parking brake switches. GM Genuine Parts are the true OE parts installed during production or validated by GM, for GM vehicles--designed, engineered, and tested to rigorous standards and backed by General Motors.
Not Yet Reviewed
$13.99
Racers, in particular, depend on their line lock system--which locks the rear or front brakes with just the flip of a switch. Components can fail over time, and Granatelli Motor Sports offers replacement activation switches compatible with most setups. The line lock feature is also great for keeping your vehicle straight as you tow downhill. For the security of braking and towing applications, it pays to have quality spare parts ready to install.
( 3 )
$15.95
Wilwood pressure switch dust boots seal out contaminants to maintain optimal operation of your switches. They are made from quality materials and designed for a perfect snug fit. Protect your switches with dust boots from Wilwood.
Not Yet Reviewed
$2.81
Wilwood employs the latest computer-aided design and manufacturing techniques when designing their stop light pressure switch pigtails. Your vehicle's stop light switch is an electro-pneumatic instrument, operating in conjunction with the brake valve and lights by completing the electrical circuit when you apply the brakes. When your connector needs to be replaced, order the Wilwood stop light pressure switch pigtails designed for your application to enjoy a high performance and reliable solution!
Not Yet Reviewed
$1.99
Wilwood electronic parking brake rear retrofit brake kits provide a complete solution for 0.81 in. and 1.10 in. rotor-width rear brake kits. These black or red powdercoated external electronic parking brakes provide superior static holding power and a simplified installation with the included controller, harness, and switch assembly. Installation would require custom bracket assemblies to fit most applications. Improve your ride's parking power to stay put with a Wilwood electronic parking brake kit.
( 5 )
$1,234.35
Sam Biondo Racing offers a wide range of products for your competition car, including new and improved line lock accessory kits. They include everything you need to wire up your line lock solenoid—including an easy-mount actuator button, line lock activation switch with wiring, inline fuse holder, fuse, and indicator light. Each component is manufactured from factory materials and specifications to ensure proper fitment and performance. They meet or exceed OE quality standards.
( 11 )
$24.99
BD Diesel variable vane exhaust brakes keep you in control of your rig and its load! BD VVB technology takes advantage of your Chevy Duramax's turbocharger exhaust turbine to create up to 35 psi of backpressure/130 retarding horsepower. This gives you ample braking force to help you safely maintain your speeds on descents and curves, also giving you better control. So, the Garrett variable vane turbo designed to reduce turbo lag and increase power also helps to slow you down! BD's variable vane brake rotary switch electronically controls the vanes in the turbo and offers automatic moderate and aggressive downshifting programs for the Allison transmission, as well as working in Allison manual shift selections. The VVBs will integrate with your cruise control and the installation is easy. Hook your Duramax up with the new era of exhaust brakes--variable vane exhaust brakes from BD Diesel.
( 3 )
$816.95
Moroso anti-roll line lock kits are a new design that has better holding power than any other unit available. Each kit features: * Totally rebuildable solenoid valve * Heavy-duty push-button switch * Extruded switch bracket * Coiled wire * Rebuildable line lock valve * Fuse holder * Indicator light
( 27 )
$162.73
—
$255.99
Classic Performance brake proportioning valves are designed to ensure that proper brake fluid pressure is supplied to the front and rear wheels. These valves are available in both fixed and adjustable versions for drum to disc brake upgrades. Numerous models and options are available for vehicles from the 1940s and up.
( 64 )
$94.99
—
$134.99
Most people who build vehicles have parts here, there, and everywhere. When you have something cool like E-Stopp push button emergency brakes, everyone that comes by looks at the kit. E-Stopp replacement control boxes are available when the original falls asleep while playing hide and seek. These micro computer-controlled boxes regulate pull up to 600 lbs., have both audible and visual recognition, and are exact copies of the originals. It would be great to know where socks and parts walk off to, but until then you can always order an E-Stopp replacement control box.
Not Yet Reviewed
$199.99
Summit Bucks
E-Stopp push-button electric emergency brakes are perfect for custom trucks, street rods, or any vehicle. They not only free up room on the chassis and in the interior, but double as an anti-theft device when the activation button is hidden. The E-Stopp units will work with any kind of braking system that can accept an emergency brake cable; and they mount anywhere there's room on the chassis. Kits include the actuator, the control box with lighted push-button switch, and wire connectors. E-Stopp push-button electric emergency brakes are controlled by a microcomputer that regulates the amount of pull--they will only pull up to 600 lbs. before they're locked down. The button has a detachable head for easy install, and allows both visual and audible recognition. Also included is a patented ignition safety feature that renders the brake inoperable while the ignition is on. E-Stopp recently added another ground sync wire that can be hooked up to the parking symbol light on your dashboard. Again, this system can be used as a theft deterrent by hiding the e-brake button under the dash or in the glove compartment, or by installing a kill switch. Basically, if someone doesn't know how to unlock your rear end, they'll have a difficult time stealing your vehicle.
( 48 )
$599.99
Summit Racing™ 12 V electric vacuum pumps utilize a rotary vane style pump with an enlarged diaphragm to ensure maximum suction while remaining nearly dead-quiet and vibration-free. Utilizing a Manifold Absolute Vacuum/Pressure (MAVP) sensor eliminates the need for old-school vacuum switches and relays. This configuration also guarantees an incredibly quick vacuum recovery time, ensuring 17 in. to 23 in. Hg vacuum all the time. The pumps come in four standard configurations: Bare (no outer shell), Black, Chrome, or Gunmetal Gray ABS plastic outer shell. Each kit comes complete with 5 ft. of 3/8 in. supporting vacuum hose, proper wiring harnesses for an easy install, and vibration dampeners—all while maintaining a common mounting hole configuration.
( 271 )
$320.99
On Sale
Whether you call them roll controls, line locks, or whatever, Hurst Roll Controls keep your stick shift car out of the staging lights until you're ready to launch. Controlled by a solenoid valve attached to a switch on your shifter, roll controls keep you from rolling by locking your front or rear brakes. When you hit the switch, your brakes are unlocked and you're ready to hit the throttle. Rigorous testing has proved a 1/100,000th of a second release time, and vibration tests have surpassed 30 Gs without mechanical failure. Each roll control comes with a rebuildable stainless steel solenoid valve, indicator light, inline fuse holder, and complete instructions. Hurst Roll Controls give you one less thing to worry about when you're staging.
( 117 )
$437.95
$179.95
—
$465.95
You can upgrade your stock suspension with Classic Performance stock spindle brake kits. Disc brakes are great. Your comprehensive CPP kit will include stock height spindles and all the components needed, from rotors to hardware, for a hassle-free installation. Make the switch to disc brakes with Classic Performance stock spindle brake kits.
( 46 )
$698.99
—
$1,024.99
You can upgrade your stock suspension with Classic Performance drop spindle brake kits. Disc brakes are great, and with these wheel kits your existing setup will be improved with the better designed (and more readily available) 1973-87 ball joints and tie rod ends. Your comprehensive CPP kit will include 2 in. drop spindles and all the components needed, from rotors to hardware, for a hassle-free installation. Make the switch to disc brakes with a Classic Performance drop spindle brake kit, available for a variety of applications.
( 31 )
$698.99
—
$824.99
Maintain your brake vacuum level with CVR electric vacuum pumps. Available in billet and economy versions, these 12 V pumps are self-contained units that require no wiring of the relays or switches. Simply connect the positive/negative power and the units will regulate the vacuum level itself. CVR electric vacuum pumps are designed to activate when vacuum drops below 15 in. and increase the brake vacuum level to 20 in. These pumps are made for vehicles using engine combinations that provide little or no manifold vacuum required for braking and can be mounted in any position.
( 65 )
$322.99
CVR electric vane-style vacuum pumps offer less noise and vibration with more vacuum. These precision-machined, self-contained units will increase levels to 20 in. of vacuum when it drops below 15 in.--automatically and quietly. They can be mounted in any position and the installation is easy; simply connect the positive/negative power. Keeping your brakes pumped up with the appropriate stopping power is a good thing. CVR electric vane-style pumps help to maintain vacuum levels and proper braking performance. Features: * Available in cast aluminum construction or black hard anodized billet aluminum * 20 percent less noise and vibration * 50 percent more vacuum than diaphragm-style pump * Built-in relay with low-amperage lead can be connected straight to key switch * 12 V, 6 amp draw * Weight: 5.5 lbs.
( 92 )
$342.99
—
$392.99
Maintain your brake vacuum level with one of these Summit Racing™ vacuum pump and reservoir kits. They're self-contained units that require no wiring of the relays or switches. Simply connect the positive/negative power—and the units will regulate the vacuum level itself. The vacuum pumps are designed to activate when vacuum drops below 15 in. and increase the brake vacuum level to 20 in. These pumps are made for vehicles using engine combinations that provide little or no manifold vacuum required for braking. They can be mounted in any position. The included vacuum reservoirs will allow you enough extra vacuum for stopping and to power any other accessories that require a vacuum source. They feature a built-in check valve and vacuum gauge, so you can monitor the vacuum level at any time. The reservoirs are manufactured from high-quality billet aluminum and have a built-in mounting flange for fast, simple installation.
( 11 )
$446.98
These Allstar Performance electric line lock kits are commonly used to prevent your drag race vehicle from rolling once you've staged or during burnouts in the water box. These electrically controlled valves engage with a switch and hold pressure to the front brakes of your car.
( 14 )
$99.99
—
$124.99
Wilwood remote tandem master cylinder kits with GM-style angled reservoirs represent the latest in refinements in brake pressure actuation and fluid control. The durable nylon reservoirs are designed so that the top is level when mounted at the 15 degree angle typical of GM power brake applications. Wilwood kits package master cylinder with GM-style angled reservoirs, combination proportioning valve, mounting bracket, fluid tubes, and mounting hardware. Features include: * High-pressure diecast aluminum cylinder is available ball burnished or with a black E-coat, and slotted mounting flanges for 3.22 in. to 3.40 in. on center studs * Combination proportioning valve substantially simplifies wiring and brake proportioning incorporating a hydraulic brake light switch, adjustable prop valve, and Y-junction block, and finished in black E-coat for durability and a performance look * Precision-bent stainless steel fluid tubes with pre-installed plated steel tube nuts for a simple bolt-on installation * Rear brake circuit reservoir, closest to the booster, holds 4.7 oz., while front brake reservoir holds 7.8 oz., both made of black plastic with black screw caps
Not Yet Reviewed
$480.60
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
