Performance Brakes: Disc, Drum, Parts & More

Because stopping is just as important as going fast, Summit Racing is your performance brake authority. We have everything from dependable stock replacement brakes for...

Because stopping is just as important as going fast, Summit Racing is your performance brake authority. We have everything from dependable stock replacement brakes for daily drivers to advanced systems and line lock kits for racing vehicles. Rotors, calipers, brake pads, master cylinders and boosters, brake lines and fluids, vacuum pumps and canisters, proportioning valves, and even drum-to-disc conversion kits are all here, all available for a wide variety of vehicles, and all at the lowest prices, guaranteed. Don’t forget a handy brake bleeder kit to help finish your new brake job!

Showing In Stock Items. Show All 41 Items.

Individual Parts

Part Groups

Results 1 - 24 of 30

All Balls Racing Brake Pad Retaining Pins

All Balls Racing pad retaining pins are essential components in your braking system to secure the brake caliper. Each brake pad retaining pin kit contains enough replacement pins for one caliper. High-quality bolts have pre-applied thread locking compound. When necessary, retaining clips are included. Select the brake pad retaining pin kit designed for your application needs.

Not Yet Reviewed

$10.19

—

$15.68

JOES Racing Products Brake Rotor T-Nuts

JOES Racing Products brake rotor T-nuts are designed to improve your braking efficiency. The hardened T-nuts will self-center in the rotor flange; and the small amount of movement allows your rotor to grow and shrink through heat expansion. As the rotor heats and cools, the T-nuts prevent warping related to heat expansion, resulting in a smooth and firm pedal throughout the race. Your brake pads will last longer and your rotor life is improved. Better braking gets you deeper into the corners. JOES Racing Products brake rotor T-nuts and rotor flange isolate heat transfer to the hub, dissipating caliper heat right at the source.

Not Yet Reviewed

$129.95

OER Authorized 1978-85 Metric-Style Rear Caliper Sets

OER Authorized 1978-85 metric-style rear caliper sets are reproductions based on the 1978-up factory GM-style calipers that accept either original GM or Lokar-type emergency brake cables. The fluid inlets are tapped to accept 7/16 in.-20 banjo fittings and each caliper includes the bracket to attach the emergency brake cable, slider bolts, and brake pads. OER Authorized metric-style rear caliper sets are manufactured to standards that meet or exceed the quality of original equipment and are backed by OER to fit and function properly.

Not Yet Reviewed

$213.99

Allstar Performance Metric Monte Carlo Brake Rotors

Allstar Performance metric Monte Carlo brake rotors are iron 5-lug hub/rotors with a natural finish that are designed to fit your spindles. They're available in different sizes and bolt pattern specs for fitment on specific applications.

1.0 out of 5 stars ( 2 )

$69.99

—

$99.99

Allstar Performance Caliper Brackets

Allstar Performance caliper brackets are made from 1/4 in. thick steel and fit 3 in. diameter axle housings. They are designed for use with 11.75 in. diameter rotors, come available for many setups, and are a perfect fit for your project. Allstar caliper brackets are the right parts at the right prices.

4.07 out of 5 stars ( 15 )

$12.99

—

$72.99

Heidts Brake Rotors

Get the components that you need to complete your suspension with perfect stopping power. Heidts brake rotors offer several brake rotor options for their Superide IFS systems, a drop spindle installation, and more. Get the right components for the right look and feel on your hot rod or muscle car from Heidts.

4.0 out of 5 stars ( 1 )

$227.00

—

$228.00

Kuryakyn Brembo Brake Caliper Covers

Kuryakyn Brembo brake caliper covers look expensive, but they're not! There's no need to spend a lot of money to chrome your calipers. These covers are beautifully finished and they bolt on in minutes, regardless of whether your bike has ABS or not. Also, there are no worries about performance--Kuryakyn Brembo brake caliper covers are slotted to keep the air flowing!

Not Yet Reviewed

$147.95

Clearance

LEED Brakes Caliper Mounting Brackets

LEED Brakes caliper mounting brackets are available for a variety of applications, including metric disc calipers. These replacement mounts are machined from steel with a protective zinc finish to resist corrosion. Order the brackets recommended for your specific vehicle.

4.0 out of 5 stars ( 9 )

$72.99

Wilwood GM D52 Dual Piston Caliper Kits

Would you love to have the braking power of dual piston calipers, but don't have the room on your 1968 or later GM car or truck? Now you do with Wilwood D52 dual piston caliper kits. These 2-piston calipers offer the high performance halting power you want and are built to mount in the stock location with stock-sized rotors! The D52 dual piston calipers are crafted with forged billet aluminum bodies, stainless steel pistons, and competition-style high-temperature seals. They provide low-maintenance performance and a huge weight savings with high-temperature reliability for the street and track. You'll have no more of the rust, bore pitting, or seal failures that plague the OEM caliper design. These much-improved red powdercoated D52 caliper kits are available for the front and rear and include pads and slide bolts. Bring your muscle to a stop--upgrade to GM D52 dual piston caliper kits from Wilwood.

4.81 out of 5 stars ( 135 )

$409.03

—

$484.13

Wilwood GM D52 Calipers

Wilwood GM D52 calipers are 2-piston, direct bolt-on replacements for the factory original single calipers on many 1968-96 GM passenger vehicles and trucks. They feature forged billet aluminum bodies, stainless steel pistons, and competition-style high-temperature seals. D52s put an end to the rust, bore pitting, and seal failures that plague the OE caliper design. These calipers provide low-maintenance performance and a huge weight savings with high-temperature reliability for the street and track. They mount in the factory location over stock rotors and use the original-style OE D52 brake pads and an OE banjo bolt brake line. Wilwood GM D52 calipers can be used with most wheels that clear the OEM calipers. They include Wilwood's hardened slide pins.

4.19 out of 5 stars ( 16 )

$197.47

—

$214.92

Allstar Performance Brake Caliper Spacers

Caliper spacers keep the piston safely in the bore of the caliper. Allstar Performance offers aluminum spacers for use with stock or stock design aftermarket calipers and thin rotors. Select from midsized GM metric caliper spacers in two thicknesses or the large GM-style. Note: Spacers may need additional clearance depending on caliper used.

5.0 out of 5 stars ( 1 )

$8.99

—

$10.99

EBC Off-Road Brake Rotors

EBC Off-Road brake rotors are made from heat-treated carbon steel that promotes extra-long rotor life and eliminates galling, which increases pad wear. They are zinc coated to prevent rust and bolt directly to your factory brake hub. These rotors are available with or without scraper holes to reduce heat, according to the original design.

5.0 out of 5 stars ( 2 )

$111.36

—

$387.26

ACDelco GM Genuine Parts Disc Brake Caliper Guide Bushing Kits

ACDelco GM Genuine Parts disc brake caliper guide bushing kits include the necessary bolts, fasteners, bushings, and other hardware where applicable for your vehicle's disc brake caliper applications, which are GM-recommended replacements for your vehicle's original components. The hardware in this kit has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Not Yet Reviewed

$32.99

JOES Racing Products Micro Sprint Front Brake Caliper Brackets

JOES Racing Products Micro Sprint front caliper brackets allow you to bolt a JOES caliper to your existing spindle. Made for spindles with a 2 1/8 in. bolt pattern, these aluminum brackets have a durable black finish. To add a left front brake to your Micro Sprint, utilize this bracket in conjunction with JOES front brake caliper (sold separately), rotor spacer (sold separately), and your brake pads and rotor.

Not Yet Reviewed

$29.95

EBC X Series Brake Rotors

EBC X Series brake rotors are complete bolt-on-and-go rotor assemblies. They are made with a sturdy riveted construction, forged aluminum center hubs, and high-friction stainless steel rotor rings. These EBC X Series brake rotors are the perfect choice for you, whether you need an OEM replacement or want to upgrade your brake rotors.

3.0 out of 5 stars ( 2 )

$270.42

—

$372.95

HardDrive Pulley Spacers

Aluminum spacers are ideal for lining up pulleys and sprockets. HardDrive pulley spacers are crafted from aluminum and treated to either a chrome or black finish. They can easily be machined down to the next size under without worrying about the spigot alignment when you machine the face of the spacer down to the desired thickness. HardDrive pulley spacers are drilled for up to 7/16 in. bolts and can also be used as disc spacers.

Not Yet Reviewed

$39.56

—

$42.26

EBC Double-H Brake Pads

EBC Double-H brake pads are the true and undisputed king of fast motorcycle brakes. Within one year of their launch in 2004 these pads became the standard by which all brake pads for street bikes were judged because of their long lasting and powerful brake effect. Double-H sintered brake pads benefit from the highest friction HH rating for maximum stopping power, and are manufactured from sintered copper alloy like original pads, for longer life and perfect braking. Stainless steel radiator plates are fitted to the pads to reduce heat transfer into your bikes hydraulics where required. The unique double segment vented design of EBC Double-H pads improves braking under all riding conditions--wet, dry, hot, or cold!

4.83 out of 5 stars ( 18 )

$40.16

—

$47.88

EBC Semi-Sintered V Brake Pads

EBC Semi-Sintered V brake pads are great heavy-duty street bike, touring, and cruiser brake pads. They feature a unique material containing 30 percent copper in a high-density Kevlar® matrix. This compound provides highly effective braking performance over a wide range of operating temperatures, with minimal pad and rotor wear and minimal wheel dusting. EBC Semi-Sintered V brake pads give you the feel, low heat generation, and rotor galling features that organic pads have, combined with the lifetime of a sintered pad.

4.86 out of 5 stars ( 7 )

$34.66

—

$44.55

EBC Street Replacement Brake Rotors

Are you tired of losing braking feel from a bent OE rotor? EBC street replacement brake rotors are your fix! These rotors are manufactured from high-quality materials and are guaranteed to give you pristine stopping performance. EBC street replacement brake rotors are designed to fit directly onto your OE hub, leaving you worry-free when it comes time for installation. Get back on the open road and stop your street warrior like it did when it came from the factory. EBC street replacement brake rotors help dissipate heat and keep your brake pads from excessive wear.

5.0 out of 5 stars ( 14 )

$149.41

—

$358.42

EBC Organic Brake Pads

EBC organic brake pads have now been renamed NAO or non-asbestos organic, although EBC still uses the famous DuPont KEVLAR® fiber in conjunction with other high-tech fibers that have come on the market. These pads are superb all-around value-for-the-money replacements for all levels of motorcycles and are still extremely popular with many riders who prefer the "feel" of organic pads. Most EBC organic pads have expansion grooves, which reduce noise and prevent cracking. Their aramid fiber compound with non-ferrous particles helps to prevent surface "scorching" under load.

5.0 out of 5 stars ( 7 )

$32.14

—

$44.95

AFCO Racing Weld-On Caliper Brackets

Go from your stock spindle to a GM caliper with AFCO Racing weld-on caliper brackets. These thick, heavy-duty steel brackets let you easily adapt your stock spindle to GM metric calipers. AFCO weld-on brake caliper mounting brackets are available for different applications.

Not Yet Reviewed

$26.99

EBC Custom Rotors

EBC custom rotors feature stainless steel brake rotor rings/blades and a polished stainless steel center hub. These EBC custom rotors are contoured with a slotted profile, which greatly improves pad break-in and reduces rotor damage (rotor galling). EBC opted for stainless steel center hubs due to the weight and heavy-duty nature of larger American motorcycles that often use twin-cylinder technology, which can lead to more vibration or frame shake. All components are stainless, including rivets, washers, and spring pressure washers. Plus, both the hub and the rotor blade are made from stainless steel, so you'll have no more rusty rotors with EBC's custom rotors.

Not Yet Reviewed

$343.60

Kuryakyn Brake Caliper Covers

Kuryakyn brake caliper covers are designed to perk up that front-end by adding super-easy-to-install caliper covers. These caliper covers are perfect accessories for adding a stylish look to your chrome wheels. You are sure to get a lot of compliments on your sweet Kuryakyn brake caliper covers.

Not Yet Reviewed

$40.99

BikeMaster Sintered Brake Pads

BikeMaster sintered brake pads perform with a powerful stopping force and a good feel that will satisfy the most demanding riders! Using the latest design and manufacturing technologies, plus years of research and brake dyno testing, these pads feature special metallic and other compounds that are fused together with great heat and pressure. This creates sintered materials that offer increased performance, heat resistance, and a longer life. Set your bike up for high performance with BikeMaster sintered brake pads.

2.5 out of 5 stars ( 2 )

$51.99

Page 1 of 2
Next