Brake Systems
Availability
Because stopping is just as important as going fast, Summit Racing is your performance brake authority. We have everything from dependable stock replacement brakes for...
Because stopping is just as important as going fast, Summit Racing is your performance brake authority. We have everything from dependable stock replacement brakes for daily drivers to advanced systems and line lock kits for racing vehicles. Rotors, calipers, brake pads, master cylinders and boosters, brake lines and fluids, vacuum pumps and canisters, proportioning valves, and even drum-to-disc conversion kits are all here, all available for a wide variety of vehicles, and all at the lowest prices, guaranteed. Don’t forget a handy brake bleeder kit to help finish your new brake job!
Because stopping is just as important as going fast, Summit Racing is your performance brake authority. We have everything from dependable stock replacement brakes for daily drivers to advanced systems and line lock kits for racing vehicles. Rotors, calipers, brake pads, master cylinders and boosters, brake lines and fluids, vacuum pumps and canisters, proportioning valves, and even drum-to-disc conversion kits are all here, all available for a wide variety of vehicles, and all at the lowest prices, guaranteed. Don’t forget a handy brake bleeder kit to help finish your new brake job!
ACDelco Gold brake master cylinders use both aluminum and iron castings, making them a high-quality replacement for many vehicles on the road today. These master cylinders contain both ethylene propylene and styrene butadiene rubber components to provide superior resistance to heat, corrosion, and leakage. ACDelco Gold brake master cylinders ready to bench bleed and install right out of the box! They're manufactured to exceed your expectations for fit and performance; order the model recommended for your application.
( 109 )
$35.99
—
$421.99
Dorman master cylinder reservoir cover gaskets are designed to keep brake fluid where it's supposed to be. They are manufactured from OEM-quality rubber and install easily on the factory master cylinder reservoir cover. Dorman brake master cylinder cap gaskets protect braking system by providing a tight seal against the elements. The gaskets are available for a variety of styles and configurations to fit your specific OEM master cylinder reservoir cover.
( 29 )
$7.99
—
$10.99
Clearance
Motorcraft brake calipers deliver just-off-the-showroom performance. Caliper housings, seals, boots, pistons, bleed screws and caps, and slide-pin boots are all the same as on the vehicle at the factory. Components are tested for abrasion resistance, high and low-pressure leaks, and durability. They provide the best balance between braking performance and reduction of noise and vibration—and are built with the understanding that can only come from being the original equipment manufacturer. Hundreds of models are available; order the calipers designed for fitment on your specific vehicle.
( 3 )
$105.99
$69.50
—
$175.99
Strange Engineering's stainless steel brake kits are designed for drag racing's most abusive applications, offering drag racers a safer and more efficient alternative to conventional carbon steel brakes. Strange's Dynamic Drive Mount (DDM) system secures the stainless rotor with an internal Spirolox--eliminating all thermally generated stress from rotor attachment points and further reducing rotating weight. The system also permits the hat and rotor to expand and contract independently, allowing for thermal expansion, which drastically reduces warping, coning, and cracking. Strange Evolution Dynamic Drive Mount brake kits feature Evolution S DDM stainless steel rotors machined from premium stainless billets, proprietary heat treated, and fully ground. The kits also contain Evolution 4 calipers, high performance metallic or semi-metallic brake pads, additional components, and hardware. Together they produce more efficient accelerating and stopping of your drag racing vehicle. Kits are available for front or rear. Choose those designed for your vehicle. Evolution S DDM rotors: * Mounts to billet aluminum DDM hat reducing rotating weight * Exhibits 48 percent greater yield strength at 1,000 degrees F compared to carbon steel, further maintaining rotor integrity * Highly resistant to heat and corrosion * Unique Aero Slot design reduces rotating weight and promotes even heat dissipation, compared to common round drilled holes * Scalloped design further reduces rotating weight 4-piston billet Evolution 4 calipers: * Computer finite element analysis (FEA) optimized and field-tested caliper -- Design improves piston retraction, pedal feel, and stiffness -- Results in improved pad wear and exemplary braking efficiency * High-retraction piston and O-ring design to eliminate drag during acceleration * Stainless steel pistons mitigate heat transfer to brake fluid * Reverse dish pressure vessel piston maximizes stiffness * All 1.750 in. pistons provide increased clamping force * Type II black anodized finish resists corrosion, heat, and brake fluid Aluminum caliper mounts: * Billet one piece design * Eliminates bolts, spacers, and nuts that require periodic maintenance Brake pads: * DTC-30 semi-metallic brake pads -- Available in rear or front kits -- Provides the best starting line cold holding power -- Recommended for vehicles going 150 mph or less in the 1/4 mile * DRM-35 metallic brake pad -- Available in rear kits only -- Provides high resistance to brake fade -- Recommended for vehicles going over 150 mph in the 1/4 mile -- Maintains decent starting line cold holding capabilities -- May leave pad residue on rotors when not using parachute -- While common, it's recommended to remove when installing new pads Housing end stud kits: * Rear kits * Provides additional components not supplied in most aftermarket kits Screw-in wheel studs: * Front kits * Tapered Allen 1/2 in.-20 x 2 1/2 in. Billet aluminum hubs: * Front kits * Strong lightweight material * Lightening holes for enhanced weight reduction * Billet hub caps with O-rings and Strange branding * Bearings, races, and seals
Not Yet Reviewed
$1,394.99
Are you looking for a replacement brake master cylinder for your brake system? Dorman has you covered with their OEM replacement Dorman brake master cylinders. Dorman brake master cylinders deliver increased performance and reliability. Dorman has industry-leading brake master cylinder application coverage that is second to none. If you want maximum performance from your brake system, then you need one of these Dorman brake master cylinders.
( 276 )
$39.99
—
$475.99
Raybestos Element3 brake master cylinders are manufactured from precision castings for an exact match to your OE design. Their casting design features a reduced weight that does not stress the brake booster mounting. Raybestos offers more than 1,600 replacement models for vehicle dating from 1947 and up. Order the size and specs recommended for your application. When using Element3 brake products, you can be certain that your replacement brake components will perform as well as your original equipment.
( 106 )
$42.99
—
$906.99
Beck/Arnley brake master cylinders are custom-fit products designed for specific vehicle applications. They're built utilizing state-of-the-art manufacturing processes and high-quality materials that meet or exceeds OE specifications. Models are available for both disc and drum braking systems. You can depend on Beck/Arnley products, just as you depend on your brakes to bring your vehicle to a stop.
( 4 )
$86.99
—
$150.99
ACDelco GM Genuine Parts brake master cylinders are a hydraulic pump mounted to the brake booster and contains a reservoir that holds brake fluid. These original equipment brake master cylinders have been manufactured to fit your GM vehicle, providing the same level of performance, durability, and service live you expect from General Motors.
( 1 )
$93.99
—
$210.99
Clearance
Centric Premium brake master cylinders offer a secure, leak-free fit to promote proper brake control. Manufactured under the highest quality standards by OE suppliers, these units match original equipment parts in quality, configuration, and fitment. They are complete with reservoirs, switches, and floats, as well as the original casting body designs where applicable. Order the model designed for your vehicle application. Features include: * Manufactured to meet strict OE specifications * Heavy-duty construction (cast iron or aluminum) * Hassle-free installation * Carefully evaluated to ensure OE quality * Available for various domestic and import vehicles
( 45 )
$44.99
—
$473.99
Whether you're flying down the highway, cruising around town, or crawling down a mountain, life takes on a terrorizing side when you lose your brakes. Crown Automotive brake master cylinders are designed just like the originals for easy installation and brake line attachment. Master cylinders and brake lines should be periodically inspected and replaced for best overall safety. When you hit the brakes and the pedal goes to the floor the results can be catastrophic. Remember to be safe out there with Crown Automotive brake master cylinders.
( 10 )
$39.99
—
$94.99
Baer Brakes Baer Claw Extreme+ disc brake systems are Baer's flagship offerings, featuring their forged Monoblock calipers mounted to 2-piece rotors. The Extreme+ systems employ current state-of-the-art race technology usually only found in very expensive race calipers. Baer now brings that technology to the road-going market. The 6S line of calipers represent Baer's most aggressive road offering and are suitable for virtually any level of track use. Optional R-Spec 6R calipers are a race version of 6S calipers; available for any Extreme+ system. The R-Spec calipers feature additional machining to the 6S calipers to save close to 2 lbs. per caliper and allow for top-loaded pads. Over 400 models are available for specific vehicle, bolt pattern, and axle applications. Features include: * MonoBlock calipers machined from a single piece of 2618 forged aluminum * The only 6-piston, forged, mono-block calipers offered to the road-going/street market * Stainless steel pistons, abutments, and noise-suppression springs * Staggered piston sizes to minimize pad wear * Uses the common D1247 (DR11) race pad backing plate, shared by many competition calipers * Dual seals (dust/weather and pressure) to meet D.O.T specifications * Caliper can accept 13.5 in. to 16 in. rotors * Machined, hand-painted logos * Available in a variety of powdercoat finishes * Uses correct banjo-style fittings; Baer does not use any pipe thread * Available for front or rear * Offers the exact same look front and rear—the only brake manufacturer that offers this! * Rear systems incorporate a drum-in-hat parking brake * Rear systems for C-clip axles include Baer's Verislide self-centering brackets * Systems include everything needed for each corner, including hoses and fittings (except for general fit applications)
Not Yet Reviewed
$4,094.95
Centric standard brake master cylinders match original equipment parts in quality, fit and finish to ensure you stay on the road, where you belong. Each master cylinder is built using the same materials as stock and where applicable reservoirs and switches are included to ensure an easy and reliable installation.
( 6 )
$46.99
—
$103.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
