Performance Brakes: Disc, Drum, Parts & More

Tilton Master Cylinder Replacement Parts

Tilton master cylinder replacement parts assist with servicing your master cylinder, as well as the setup between master cylinder and remote reservoir. Whether you need a new remote reservoir inlet adapter, or reservoir clamp to reattach your Tilton reservoir to the master cylinder, or replacement O-rings for the inlet neck of the master cylinder itself, Tilton carries the necessary parts to complete the task successfully.

5.0 out of 5 stars ( 3 )

$1.99

—

$3.83

Wilwood Master Cylinder Replacement Components

Wilwood offers a variety of master cylinder replacement components—such as reservoirs, lids, diaphragms, fittings, dust boots, and more. Depend on Wilwood for accessories and replacement parts needed to keep your brake system working right.

4.5 out of 5 stars ( 16 )

$6.29

Wilwood Brake Rotor Bolts

Wilwood brake rotor bolts keep your rotors fastened securely. Made from high-strength materials, these bolts will attach a rotor, rotor mounting hat, or hub to a threaded or through hole mount. Many of the bolt choices are drilled for lock wire and may include washers. Anchor your rotors for performance with Wilwood brake rotor bolts.

4.37 out of 5 stars ( 19 )

$39.86

Allstar Performance Caliper Brackets

Allstar Performance caliper brackets are made from 1/4 in. thick steel and fit 3 in. diameter axle housings. They are designed for use with 11.75 in. diameter rotors, come available for many setups, and are a perfect fit for your project. Allstar caliper brackets are the right parts at the right prices.

4.07 out of 5 stars ( 15 )

$46.99

—

$72.99

Wilwood D8-4 Brake Calipers

When you need replacement calipers for your C2 or C3 Corvette, try on a set of Wilwood D8-4 brake calipers. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failure. These calipers are direct bolt-on replacements for your factory original calipers mounting in the stock location over stock rotors using original-style brake pads. D8-4 calipers fit and install like stock--even the factory piston sizes were duplicated--but with Wilwood's in-house design and 3-D technology they offer lighter weight, unyielding strength and superior piston design to generate a positive pedal response with high clamping efficiency. The world of motion is yours--and your vette's-with the stopping power of Wilwood D8-4 front and rear brake calipers.

4.67 out of 5 stars ( 81 )

$308.72

—

$808.49

Wilwood Forged Dynalite Pro Series Front Disc Brake Kits

Wilwood's Forged Dynalite Pro series front disc brake kits are designed to provide unmatched performance with classic, high-tech styling for a wide variety of street rods, musclecars, hot rods, and heavy drag cars. The kits combine the powerful clamping force of Dynalite calipers with the added performance and cooling capacity of competition-style vented rotors. Other features include hubs, brake pads, caliper brackets, mounting hardware, and detailed instructions for an easy bolt-on installation. In addition to everything else, these kits can also cut as much as 35 lbs. off of your front-end.

4.58 out of 5 stars ( 201 )

$1,057.29

—

$1,802.61

Wilwood Classic Series Dynalite Front Brake Kits

Wilwood Classic Series Dynalite front brake kits deliver consistent stopping power for your classic cars. The forged Dynalite calipers combine technology and style to create stronger, more reliable clamping power that's proven to outperform existing styles of this popular caliper size. The complete packages also include solid surface or drilled and slotted rotors, premium brake pads, brackets, and all required hardware. Kits are available to accommodate the needs of daily driving and show cars. Order the model designed for your vehicle application.

4.73 out of 5 stars ( 261 )

$766.55

—

$1,055.64

Wilwood GP200 Brake Calipers

Wilwood GP200 brake calipers are your ticket to a firm, responsive pedal with outstanding stopping power! They are specifically designed for tight-fitting applications utilizing a standard 2.38 in. lug mount. Weighing in at only .90 lbs., these lightweight calipers combine superior strength with excellent performance! Fully CNC-machined from premium-grade alloy billet, Wilwood GP 200 brake calipers feature an FEA-generated body design that incorporates a highly fortified transition between the piston housings and bridges. By strengthening this critical area of the caliper, resistance to deflection and body separation under load are substantially increased. Heavy-wall stainless steel pistons resist corrosion and slow the heat transfer from your brake pads, while their heavy-wall sectional thickness improves pedal firmness and overall clamping efficiency. Wilwood GP 200 brake calipers are topped with a beautiful black anodized finish.

Not Yet Reviewed

$142.42

—

$158.72

Wilwood TC6R Big Brake Truck Front Brake Kits

These Wilwood TC6R big brake front kits feature everything you need for maximum stopping power. They use a TC6R billet aluminum brake caliper, which generates unmatched clamping efficiency through six thick-walled stainless steel pistons. Those are matched to an advanced formula high-friction compound for quick response and extended fade resistance. These Wilwood TC6R big brake front kits are available with your choice of standard 16 in. directional-vane GT rotors or the high performance 16 in. cross-drilled, slotted, zinc-washed SRP rotors. Each rotor is mated to high-strength, forged aluminum hats that are rib-reinforced to carry extreme loads and are black anodized to prevent oxidation. Get your truck or SUV stopped quickly with one of these Wilwood TC6R big brake front kits.

4.55 out of 5 stars ( 20 )

$2,901.75

—

$3,092.33

ACDelco GM Genuine Parts Disc Brake Calipers

Does your GM vehicle pull to the left or the right when the brakes are applied? Maybe your brake warning light is on? These are just a few indications that your calipers may need attention. ACDelco GM Genuine Parts disc brake calipers are recommended replacement parts for your GM vehicle's original factory equipment. These calipers are hydraulic components mounted over the brake rotor, acting as a clamp to press the pads against the rotor when the brakes are applied. Manufactured with GM OE specifications for fit, form, and function, the disc brake calipers offer the quality performance and long service life you expect from General Motors. Order the model designed for your specific vehicle.

4.91 out of 5 stars ( 22 )

$38.99

—

$733.99

Wilwood AERO6-DM Direct Mount Truck Brake Kits

Wilwood AERO6-DM direct mount truck brake kits were designed for the specific purpose of providing big capacity braking with large diameter rotors for heavy weight and extreme duty vehicles. For trucks and SUV's, it provides big stopping power for towing, off-road, and enhanced braking with wheel and tire upgrades. The kits provide better hold while crawling and more thermal capacity for high-demand off-road and highway use, including towing, hauling, and commercial applications. These kits are engineered for direct mounting on Chevy, Ford, Jeep, and Toyota trucks, SUVs, and 4x4s. Forged aluminum AERO6-DM six-piston calipers deliver increased clamping force and are compatible with OEM rear brakes, master cylinder, and computer systems. The premium grade, long-grain carbon iron alloy rotors substantially increase braking performance with fade-resistant Wilwood performance brake pads. These kits fit in most 17 in. and larger wheels. Order the model designed to fit your application.

5.0 out of 5 stars ( 6 )

$1,755.59

Wilwood Forged DPHA Front Caliper Kits

Wilwood forged DPHA front caliper kits are DynaPro packages specifically designed for Honda® and Acura® models originally equipped with 262mm diameter rotors. Packaged with calipers, pads, and hardware, DPHA calipers are available in several high-gloss, high-temperature, and brake fluid-resistant sealed powdercoat colors with the Wilwood signature logo. DynaPro Honda®/Acura® (DPHA) 4-piston calipers have forged billet bodies to deliver high-strength clamping force and positive stopping power. Plus, the stainless steel pistons provide fully balanced pad loading, along with the corrosion resistance and thermal retardant qualities of the stainless alloy that will keep your calipers cooler and running trouble-free for many more miles. Wilwood forged DPHA front caliper kits bolt directly to the stock mounts on factory spindles, fit over the OE 262mm diameter rotor, accept the OE brake hose, and clear many factory aluminum wheels, including the EM1 Si 15 in. wheel. The calipers also work perfectly with the OE master cylinder and ABS functions.

5.0 out of 5 stars ( 5 )

$503.45

—

$577.49

Wilwood Front Medium-Duty Disc Brake Kits

Wilwood's front medium-duty disc brake kits are designed for cars weighing up to 2,800 lbs., and are compatible with either disc or drum rear brakes. These kits combine the powerful clamping force of Dynalite aluminum calipers with the added performance and cooling capacity of competition-style, vented, iron-alloy rotors. Other features include aluminum-alloy brake hats, Polymatrix "T" compound brake pads, aluminum caliper brackets, Grade 8 mounting hardware, and detailed instructions for an easy bolt-on installation.

4.67 out of 5 stars ( 3 )

$926.63

—

$943.24

Wilwood Forged DPHA Front Caliper and Rotor Kits

Wilwood Forged DPHA front caliper and rotor kits are designed around their DynaPro series 4-piston calipers and forged billet bodied rotors for high-strength clamping and solid stopping performance. These calipers work perfectly with the OE master cylinder and ABS functions, bolt up to the stock mounts on factory spindles, accept OE brake hoses, clear many factory aluminum wheels, and fit over 262mm diameter rotors. The low-dusting pads are firmly balanced by four stainless steel pistons, which provide corrosion resistance and thermal retardant qualities.

4.86 out of 5 stars ( 7 )

$645.55

—

$762.84

Wilwood Parking Brake Components

Wilwood parking brake components maintain readiness in case of an emergency. Their assortment of hardware parts will renew and restore optimum performance. They offer cable clevises, housing end adjusters, clamps, and block assemblies--many manufactured from steel and plated for corrosion resistance. Keep your vehicle motionless when parked and ready in case your main brake fails with Wilwood parking brake components.

4.8 out of 5 stars ( 10 )

$1.99

—

$24.38

Wilwood D8-6 Brake Calipers

Does your Corvette need a brake caliper upgrade? These Wilwood D8-6 brake calipers are direct bolt-on replacements for the OE calipers on all 1965-82 Corvettes. Forged billet aluminum bodies, stainless steel pistons, and high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE calipers. Wilwood D8-6 brake calipers provide low-maintenance performance, a significant weight savings, high-temperature reliability, and the added benefit of 6-piston pad clamping power. D8-6 calipers mount in the stock location over stock rotors, use the original-style D8 brake pads, and fit snugly inside most '67 or newer production wheels. Some wheels, including the 1965-66 OE "JK" code steel wheels and a few aftermarket replica alloy wheels, will require a 3/16 in. or wider wheel spacer for clearance. These Wilwood D8-6 brake calipers are sure to give your Corvette outstanding braking capabilities over the OE calipers.

4.69 out of 5 stars ( 16 )

$347.54

—

$948.53

Wilwood Powerlite Calipers

Powerlite 4-piston radial mount calipers combine pure race technology with a new generation of Wilwood performance enhancements. Their sleek profile, superior strength, and durability in higher temperature applications are easily adapted to a wide range of sports, rally, and off-road driving applications. The strength of the Powerlites is a combination of process and design. The process of stress-flow forging re-aligns the metal's grain structure within the contour of the caliper body. This eliminates the stresses and interruptions to the internal grain structure that occur when machining a straight block billet. Their FEA-generated radial transition design eliminates steps and shoulders in the area between the piston housing body and the caliper bridges. Incorporating a radius in this critical area substantially increases resistance to deflection and caliper separation under load. Structural deflection and volume displacement tests have proven the efficiency of this innovative design. Without even considering the overall greater strength and reliability of the billet forging, the reduction in overall deflection and fluid volume displacement translate into increased clamping efficiency with less pedal travel. The bottom line is a firm pedal with outstanding stopping power.

5.0 out of 5 stars ( 5 )

$190.75

—

$248.81

Wilwood Superlite 4R Rear Drum-to-Disc Brake Kits

Upgrading the brakes on older trucks makes them safer with improved stopping power. Wilwood's new Forged Superlite 4R rear drum-to-disc conversion kits for select Chevy and GMC trucks and SUVs are one of the best upgrades for overall braking performance. You'll experience more brake clamping force, thermal capacity, improved pedal feel, and confidence--from daily street performance to heavy-use applications, including towing, hauling, commercial workloads, and off-road. Kits include internal parking brake assemblies. Rotors are available with a solid or cross-drilled/slotted surface. Kits feature: * Complete bolt-on installation using Wilwood's decades of experience in performance, off-road, and competitive motorsports * Compatible with Wilwood front kits, factory ABS systems and OE master cylinder --- Calipers: Superlite • 12.88 in. and 14.00 in. rear kits feature Wilwood's motorsports-proven rigid Superlite four piston calipers * Stainless steel pistons are housed in Type-III hard anodized bores with high-temperature seals for durability * Internal drum parking brakes retain OE feature --- Rotors: ULHP, Spec37 GT or SRP Drilled • 12.88 in. x 1.10 in. kit features Spec37 two-piece rotors with 48 curved vanes are E-coated in GT slotted or SRP drilled and slotted • 14.00 in. x 1.10 in. kit features Spec37 two-piece rotors with 72 curved vanes are E-coated in GT slotted or SRP drilled and slotted --- Brake pads: BP-10 street performance pads provide smooth and consistent response with long wear over a broad range of temperatures (other compounds available) --- Installation parts: Caliper brackets, parking brake cable connection kit, and premium-grade installation hardware included

Not Yet Reviewed

$2,221.36

—

$2,409.74

Wilwood DynaPro Single LW Brake Calipers

DynaPro single LW brake calipers are lightweight, super-strong performance calipers for your racer. Their lighter weight design is perfect in tight situations, such as with your Sprint Car front-end. The calipers are fully CNC-machined from premium-grade alloy billet. Their body design strengthens critical areas for deflection resistance and body separation under load, so you'll have increased clamping efficiency with less pedal travel. DynaPro single LW calipers feature Quick-E-Clip pad retainers for fast pad service without caliper removal. Other features include heavy-wall stainless steel pistons, SRS bridge plates, internal fluid passages, and 4-corner bleed screws. Drive through your world of motion knowing that you have the stopping power of Wilwood DynaPro single LW brake calipers.

Not Yet Reviewed

$128.26

Wilwood Electronic Parking Brake Calipers

Wilwood Electronic Parking Brake (EPB) calipers are high-torque alternatives to manual cable actuated brakes. Offering a simplified installation with additional electronic control systems also available from Wilwood, these EPB stand-alone calipers are available for rotors with diameters up to 15.00 in. and with widths from .157 in. to 1.25 in. The larger units are sized for use on the rear of typical cars and trucks, while the smaller units for thinner rotors are ideal for powersports, agricultural, and utility machines with non-vented rotors as thin as .157 in. Wilwood EPB calipers are constructed of forged aluminum for strength and lighter weight, with a steel bracket and geared motor assembly to provide 2,400 lbs. of clamping force. Right and lefthanded motor options are available for ease of installation, they are available in several finishes. Choose the size and finish preferred for your application.

5.0 out of 5 stars ( 1 )

$381.13

—

$442.24

Wilwood Front Heavy-Duty Pro Series Disc Brake Kits

Wilwood's front heavy-duty Pro series disc brake kits are designed to provide unmatched performance and classic, high-tech styling for a wide variety of street rods, musclecars, hot rods, and heavy drag cars. The kits combine the powerful clamping force of Dynalite calipers with the added performance and cooling capacity of competition-style, vented, iron-alloy rotors. Additional features include: * Aluminum-alloy brake hats * Polymatrix "T" compound brake pads * Aluminum caliper brackets * Grade 8 mounting hardware * Detailed instructions for an easy bolt-on installation

4.5 out of 5 stars ( 4 )

$1,100.60

—

$1,238.10

Wilwood Dynalite Pro Series Front Disc Brake Kits with SRP Rotors

Wilwood's Dynalite Pro series front disc brake kits with SRP rotors are designed to provide unmatched performance with classic, high-tech styling for a wide variety of street rods, musclecars, hot rods, and heavy drag cars. The kits combine the powerful clamping force of Dynalite forged-billet, 4-piston calipers with the added performance and cooling capacity of competition-style, vented, iron-alloy rotors. Other features include aluminum-alloy brake hats where applicable, Polymatrix brake pads, aluminum caliper brackets, Grade 8 mounting hardware, and detailed installation instructions for an easy bolt-on installation. In addition to all this, these kits can also cut as much as 35 lbs. off of your front-end.

5.0 out of 5 stars ( 4 )

$1,194.79

Wilwood Forged Dynalite Brake Calipers

Forged Dynalites are the strongest calipers in their class. The process of stress-flow forging realigns the metal's grain structure within the contour of the caliper body. This process eliminates the breaks and interruptions to the internal grain structure that occur when machining a straight block billet. Their FEA-generated radial transition design eliminates steps and shoulders in the area between the piston housing body and the caliper bridges. Incorporating a radius in this transition area substantially increases deflection resistance and separation under load. Structural deflection and volume displacement tests have proven that the forged Dynalites outperform all existing styles of this popular caliper size. Without even considering the overall greater strength and reliability of the forging, the reduced deflection tendencies and the resulting decrease in fluid volume displacement translate into increased clamping efficiency with less pedal travel. The bottom line is a taller pedal and better stopping power. These Forged Dynalite calipers are direct replacements for all Wilwood Dynalite and similar competitive brand calipers with 5.25 in. centered mounting lugs. The forged Dynalites use the same 7112-type brake pads used in all earlier versions of these calipers.

5.0 out of 5 stars ( 2 )

$214.95

Allstar Performance Brake Duct Hose Flanges

Allstar Performance has all of the parts that you need to put together your brake system. Their brake duct hose flanges rivet to the nosepiece, allowing the brake duct hose to be clamped to the flanges.

5.0 out of 5 stars ( 3 )

$37.99