Brake Systems
Availability
Because stopping is just as important as going fast, Summit Racing is your performance brake authority. We have everything from dependable stock replacement brakes for...
Because stopping is just as important as going fast, Summit Racing is your performance brake authority. We have everything from dependable stock replacement brakes for daily drivers to advanced systems and line lock kits for racing vehicles. Rotors, calipers, brake pads, master cylinders and boosters, brake lines and fluids, vacuum pumps and canisters, proportioning valves, and even drum-to-disc conversion kits are all here, all available for a wide variety of vehicles, and all at the lowest prices, guaranteed. Don’t forget a handy brake bleeder kit to help finish your new brake job!
Because stopping is just as important as going fast, Summit Racing is your performance brake authority. We have everything from dependable stock replacement brakes for daily drivers to advanced systems and line lock kits for racing vehicles. Rotors, calipers, brake pads, master cylinders and boosters, brake lines and fluids, vacuum pumps and canisters, proportioning valves, and even drum-to-disc conversion kits are all here, all available for a wide variety of vehicles, and all at the lowest prices, guaranteed. Don’t forget a handy brake bleeder kit to help finish your new brake job!
Showing In Stock Items. Show All 44 Items.
Baer Brake Systems ReMaster adjustable proportioning valves allow you to adjust the front/rear bias of your brakes for changes in weather, track conditions, vehicle loading, or when converting a system from drum to disc. Their design allows them to mount on the same side as the ports on ReMaster master cylinders. Order Baer Brakes ReMaster adjustable proportioning valves as part of your complete performance brake system!
( 2 )
$149.95
—
$179.95
Wilwood brake proportioning valves are adjustable between 100 and 3,000 psi (depending on model) with a twist of a knob or the flip of a lever, and most can reduce pressure up to 57 percent. They let you adjust brake bias quickly and easily to compensate for changing track conditions, or for big and little tire combinations.
( 289 )
$53.29
—
$150.00
Eliminate premature rear wheel lockup with LEED Brakes adjustable brake proportioning valves. These aluminum units install in your rear brake line, after any distribution blocks, and allow you to reduce the amount of pressure going to the rear brakes. They will help eliminate any premature rear wheel lockup, as well as provide you with better control of your vehicle during hard braking. LEED proportioning valves are available in different inlet/outlet styles; order the model best suited for your vehicle application.
( 6 )
$64.99
—
$134.99
Summit Racing™ adjustable brake proportioning valves can be mounted vertically or horizontally. A turn of the knob adjusts the brake proportion on your vehicle to help tailor the brakes to specific requirements. The aluminum valves are available in different styles, with multiple inlet/outlet sizes and quantities. You can also select the finish and max PSI you desire. These proportioning valves are offered as standalone units or in kits with mounting brackets and lines.
( 144 )
$48.99
—
$126.99
Baer Brakes proportioning valves allow you to tweak brake bias in big or little increments simply by twisting the large adjuster knob as needed. They're black anodized for a long-lasting finish. Features include: * Complete with all fittings * Mounting bracket included * Laser-etched body
( 7 )
$79.95
—
$149.95
Classic Performance brake proportioning valves are designed to ensure that proper brake fluid pressure is supplied to the front and rear wheels. These valves are available in both fixed and adjustable versions for drum to disc brake upgrades. Numerous models and options are available for vehicles from the 1940s and up.
( 64 )
$78.99
—
$134.99
Doing an upgrade? The Right Stuff brake proportioning valves and blocks can help you get the job done right. Restoring your classic usually means stepping up your stopping power and The Right Stuff offers quite a selection of proportioning valves, distribution blocks, metering blocks, and combination valves to get your drum, disc, or conversion system into optimum operation. You need the right amount of pressure and the right amount of fluid distributed to your brake lines for reliable, safe performance. To gain proper function and fit, renovate your brake system with brake proportioning valves and blocks from The Right Stuff.
( 137 )
$60.99
—
$92.99
Compact and lightweight (8 oz.), Ford Performance Parts brake proportioning valves are made from billet aluminum and are adjustable from 100 to 1,000 psi. They can be adjusted to deal with different tire sizes, mismatched front and rear brakes, and weight changes resulting from changing fuel loads. Inlet and outlet ports are threaded 1/8 in.-27 NPT for maximum installation flexibility.
( 2 )
$57.99
Proper brake balance can be a whole lot easier to achieve with a proportioning valve like Strange's compact, knob-type adjustable units. Rather than increase line pressures, they reduce pressure to the calipers they serve. This makes fine-tuning brake pressures to attain proper brake balance as simple and easy as a twist of the wrist.
( 2 )
$59.99
SSBC-USA light and tidy, knob-type proportioning valves can be installed almost anywhere in the brake lines. They allow you to tweak brake bias in large or small increments simply by twisting the adjuster knob as needed. They're available with an optional inline pressure gauge and come in either a black anodized or polished finish. Fine-tune your braking with SSBC-USA.
( 4 )
$59.00
—
$98.00
With a twist of the wrist, you can fine-tune your brake bias with these pocket-sized Russell brake proportioning valves. They're manufactured from billet aluminum, have anti-corrosive brass internal components, and can drop line pressures by as much as 60 percent. They feature an anodized finish, and 3/8 in.-24 threaded line adapters and 3/16 in. hard tube adapters are included.
( 2 )
$71.95
McGaughy's brake proportioning valves will deliver the right amount of fluid to your brake lines, keeping your brakes properly engaged. They offer adjustable kits with valve and fittings, as well as non-adjustable kits with valve, lines, and bracket.
( 6 )
$106.99
CA offers brake proportioning valves for a variety of applications, including many Chevy Corvette models from the 1960s, '70s, and '80s. These safety devices control the amount of brake fluid that flows to the rear brakes, preventing the wheels from locking up before the front wheels during a panic stop. The brass valves are machined in accordance with factory specs to ensure proper fit and performance. They meet or exceed OEM quality standards.
( 2 )
$106.99
Add safety your brake system with LEED brake proportioning valves! These brass prop valves are equipped with a safety switch that's designed to sense when your brake system is producing unequal or lower pressure to one or more of the wheels—usually caused by a component failure. Without this valve installed, if a component fails on your vehicle, the brake pedal will drop to the floor as you pump the pedal, with little to no braking. Don't take chances! Order the LEED Brakes brake proportioning valves recommended for fitment on your application.
( 5 )
$109.99
The Right Stuff brake proportioning valve kits are designed for vehicles that have been converted from drum to front disc brakes, when they are equipped with rear drum brakes. These brake valves will increase front brake pressure to accommodate your front disc brake conversion. The Right Stuff kits include a mounting bracket, a pigtail for the switch, and hardware for an easy installation.
( 9 )
$139.99
Tilton's lightweight, adjustable, billet aluminum, hydraulic brake proportioning valves make it easy for crew members or drivers to make quick, precise adjustments to brake bias. Lever types have seven distinct "click-stop" positions, and their big, bright red handles make determining the level of bias selected as easy as a quick glance. Knob types offer the ability to vary the adjustment in bigger or smaller increments as needed, simply by turning the knurled knob more or less.
( 2 )
$97.75
Classic Performance brake proportioning valve brackets are exactly what you need to mount your proportioning valve on your ride properly. Some brackets will include correctly bent lines and fittings. They are available for right and left hand applications.
( 32 )
$34.99
When you need replacement parts and components for your Baer Remaster master cylinder and adjustable proportioning valve ports, Baer offers exactly what you need. Their brass seats are used when running 3/16 in. inverted flare fittings/lines. They will provide the correct fit and function.
Not Yet Reviewed
$2.95
LEED master cylinder and brake booster combos deliver top-quality braking power and are designed to mount directly to your factory firewall. The Leeds brake booster assemblies work great as factory replacements or an upgrade from manual to power brakes. Make your quick stops effective and safe with LEED combo kits!
( 89 )
$341.24
—
$599.99
Power brake quick install kits mount directly to the firewall and provide top-quality braking power. Everything is needed in these kits for a quick and easy swap. Don't let your old brakes be an issue anymore—come to a halt with LEED!
( 11 )
$409.99
—
$524.99
Summit Racing™ master cylinder and brake booster combos deliver top-quality braking power and are designed to mount directly to your factory firewall. They work great as factory replacements or an upgrade from manual to power brakes for vehicles with automatic transmissions. Kit components are available in different sizes, styles, materials, and finishes for fitment on countless vehicles from the 1950s, '60s, and '70s. Make your quick stops effective and safe with Summit Racing™ combo kits!
( 36 )
$301.99
—
$454.99
Are you building your own Baer Brakes system? Baer offers these master cylinders in their lineup of individual components. Master cylinders are available for a variety of applications. You can count on Baer Brakes for the products that you need to get your project done right!
Not Yet Reviewed
$699.95
Upgrade your car to a dual-bore master cylinder with LEED Brakes hydraulic master cylinder upgrade kits. These kits will allow you to upgrade your factory manual brake car to dual-bowl manual brakes in no time! In each kit, you'll receive the master cylinder and hardware needed for an easy installation. Where applicable, the LEED Brakes kits will include either an adjustable valve or pre-set proportioning valve to work with your application. The adjustable valve allows you to fine-tune the amount of the pressure your rear brakes receive to prevent rear wheel lockup. Master cylinders are available in a variety of sizes, materials, and finishes. Order the model recommended for your vehicle.
( 16 )
$134.99
—
$324.99
Summit Racing™ residual check valves are ideal replacement parts in any brake set-up that uses an adjustable proportioning valve. Check valves run inline on the rear brakes in disc/drum systems to ensure the shoes stay in contact with the drums. Avoid allowing your drum system brake springs to compress the wheel cylinders (resulting in excessive pedal travel) with the Summit Racing™ residual check valves designed for your application.
( 7 )
$16.99
—
$17.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
