Availability
Doing an upgrade? The Right Stuff brake proportioning valves and blocks can help you get the job done right. Restoring your classic usually means stepping up your stopping power and The Right Stuff offers quite a selection of proportioning valves, distribution blocks, metering blocks, and combination valves to get your drum, disc, or conversion system into optimum operation. You need the right amount of pressure and the right amount of fluid distributed to your brake lines for reliable, safe performance. To gain proper function and fit, renovate your brake system with brake proportioning valves and blocks from The Right Stuff.
( 139 )
$58.99
—
$229.99
Add safety your brake system with LEED brake proportioning valves! These brass prop valves are equipped with a safety switch that's designed to sense when your brake system is producing unequal or lower pressure to one or more of the wheels—usually caused by a component failure. Without this valve installed, if a component fails on your vehicle, the brake pedal will drop to the floor as you pump the pedal, with little to no braking. Don't take chances! Order the LEED Brakes brake proportioning valves recommended for fitment on your application.
( 5 )
$139.99
—
$164.99
The Right Stuff brake proportioning valve kits are designed for vehicles that have been converted from drum to front disc brakes, when they are equipped with rear drum brakes. These brake valves will increase front brake pressure to accommodate your front disc brake conversion. The Right Stuff kits include a mounting bracket, a pigtail for the switch, and hardware for an easy installation.
( 9 )
$139.99
Summit Racing™ adjustable brake proportioning valves can be mounted vertically or horizontally. A turn of the knob adjusts the brake proportion on your vehicle to help tailor the brakes to specific requirements. The aluminum valves are available in different styles, with multiple inlet/outlet sizes and quantities. You can also select the finish and max PSI you desire. These proportioning valves are offered as standalone units or in kits with mounting brackets and lines.
( 147 )
$48.99
—
$126.99
Eliminate premature rear wheel lockup with LEED Brakes adjustable brake proportioning valves. These aluminum units install in your rear brake line, after any distribution blocks, and allow you to reduce the amount of pressure going to the rear brakes. They will help eliminate any premature rear wheel lockup, as well as provide you with better control of your vehicle during hard braking. LEED proportioning valves are available in different inlet/outlet styles; order the model best suited for your vehicle application.
( 6 )
$64.99
—
$134.99
McGaughy's brake proportioning valves will deliver the right amount of fluid to your brake lines, keeping your brakes properly engaged. They offer adjustable kits with valve and fittings, as well as non-adjustable kits with valve, lines, and bracket.
( 6 )
$74.99
—
$106.99
SSBC-USA light and tidy, knob-type proportioning valves can be installed almost anywhere in the brake lines. They allow you to tweak brake bias in large or small increments simply by twisting the adjuster knob as needed. They're available with an optional inline pressure gauge and come in either a black anodized or polished finish. Fine-tune your braking with SSBC-USA.
( 5 )
$59.00
—
$112.00
Proper brake balance can be a whole lot easier to achieve with a proportioning valve like Strange's compact, knob-type adjustable units. Rather than increase line pressures, they reduce pressure to the calipers they serve. This makes fine-tuning brake pressures to attain proper brake balance as simple and easy as a twist of the wrist.
( 2 )
$59.99
Classic Performance brake proportioning valve brackets are exactly what you need to mount your proportioning valve on your ride properly. Some brackets will include correctly bent lines and fittings. They are available for right and left hand applications.
( 34 )
$14.99
—
$34.99
Tuff Stuff Performance brake proportioning valves are essential components in your braking system. These kits are designed to fit with various Tuff Stuff master cylinders—feeding disc brakes, drum brakes, or a combination of the two. The parts feature solid brass construction and are available in your choice of a natural or chrome plated finish. Tuff Stuff Performance brake proportioning valves include a matching mounting bracket with hardware, two 90 degree brake lines with fittings, and a wiring connector. Order the model recommended for your brake application.
( 33 )
$109.99
—
$158.99
Allstar Performance combination valve mounting brackets are secure, versatile, and perfectly priced. The zinc plated steel brackets will firmly mount your combination valves—either to the frame or directly under the master cylinder, providing access to lines and fittings.
( 12 )
$15.99
With a twist of the wrist, you can fine-tune your brake bias with these pocket-sized Russell brake proportioning valves. They're manufactured from billet aluminum, have anti-corrosive brass internal components, and can drop line pressures by as much as 60 percent. They feature an anodized finish, and 3/8 in.-24 threaded line adapters and 3/16 in. hard tube adapters are included.
( 2 )
$71.95
Mount your rear axle housing with Shafer's Classic Reproductions brake proportioning valve junction blocks. Made of brass, these blocks are often missing or tossed away with the old lines. These reproductions offer the correct size and fit for the applications listed, providing the same performance as the originals they are replacing.
( 1 )
$19.99
OER Authorized proportioning valve mounting brackets are offered in two styles to secure your valve properly. Their universal proportioning valve/combination valve brackets mount to frame or directly to master cylinder, providing access to lines and fittings. Their universal bracket for proportioning valve mounts on the left hand side of the master cylinder towards the driver side fender and includes hardware. All OER mounting brackets are stamped steel with either a zinc plated or chrome plated finish for superior corrosion resistance.
( 1 )
$18.99
LEED Brakes proportioning valve mounting brackets are secure, versatile, and perfectly priced. The zinc plated or chrome finished steel brackets will firmly mount your proportioning valve—either to the side or directly under the master cylinder, providing access to lines and fittings.
Not Yet Reviewed
$34.99
—
$46.99
Wilwood brake proportioning valves are adjustable between 100 and 3,000 psi (depending on model) with a twist of a knob or the flip of a lever, and most can reduce pressure up to 57 percent. They let you adjust brake bias quickly and easily to compensate for changing track conditions, or for big and little tire combinations.
( 293 )
$150.00
Summit Racing™ brake proportioning valves keep the proper amount of brake fluid pressure applied to your front and rear wheels. You should choose more quality for less money with Summit Racing™ brake proportioning valves.
( 282 )
$55.99
Classic Performance brake proportioning valves are designed to ensure that proper brake fluid pressure is supplied to the front and rear wheels. These valves are available in both fixed and adjustable versions for drum to disc brake upgrades. Numerous models and options are available for vehicles from the 1940s and up.
( 64 )
$118.99
—
$134.99
On Sale
Scott Drake brake proportioning valves are far superior to the original equipment! When you're fixing up your classic car, in particular, just think of Scott Drake as an extra set of helping hands.
( 20 )
$143.95
$95.55
—
$129.55
On Sale
Scott Drake offers brake distribution blocks for a variety of disc and drum applications on 1970s era Ford Mustangs. The brass proportioning valves are far superior to the original equipment. Order the replacement model recommended for your vehicle.
( 9 )
$128.95
$116.05
Brothers Trucks offers proportioning valves for the dual master cylinder conversion, designed to balance front and rear disc brake pressure on a variety of Chevy and GMC truck applications. These kits include the mounting bracket that fits under the master cylinder and two tubes to attach to the dual reservoir master cylinder (available separately). The mounting bracket is steel with zinc plating, and the proportioning valve is made of brass for corrosion resistance. Includes built-in residual pressure valve for improved brake feel. Product features: * Brake proportioning valve: Ideal for 4-wheel disc brake conversion * For use with disc front and disc rear brake systems * Brass construction, and zinc plating on the mounting bracket * Improved stopping power and safety
Not Yet Reviewed
$99.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
