Availability
Showing In Stock Items. Show All 34 Items.
If you're looking for a new master cylinder for the disc or drum brakes on your vehicle, Summit Racing™ has just what you need. These oval-shaped, dual bowl master cylinders are made from aluminum with 3 3/8 in. center-to-center mounting holes. The lid is a screw-top style with hex screws. Best of all, Summit Racing™ gives you options—these master cylinders are sold individually, or in a kit that includes a proportioning valve. Choose the finish you prefer and the bore size needed for your disc or drum brake system.
( 40 )
$151.99
—
$210.99
Brake and/or clutch efficiency begins with Classic Performance master cylinders. These replacement units are manufactured from high-quality materials such as cast iron or aluminum, and are available in a variety of sizes, styles, and finishes. The master cylinders include the cap to seal out air and protect the fluid from contamination.
( 49 )
$158.99
Upgrade your car to a dual-bore master cylinder with LEED Brakes hydraulic master cylinder upgrade kits. These kits will allow you to upgrade your factory manual brake car to dual-bowl manual brakes in no time! In each kit, you'll receive the master cylinder and hardware needed for an easy installation. Where applicable, the LEED Brakes kits will include either an adjustable valve or pre-set proportioning valve to work with your application. The adjustable valve allows you to fine-tune the amount of the pressure your rear brakes receive to prevent rear wheel lockup. Master cylinders are available in a variety of sizes, materials, and finishes. Order the model recommended for your vehicle.
( 16 )
$134.99
—
$254.99
Baer Brakes Remaster to Remaster/general fit proportioning valve hard lines are manufactured from stainless steel. They are available with inverted flare or banjo fittings, in sizes to fit 1 1/8 in. or 15/16 in. and 1 in. master cylinders and proportioning valves. They fit right and left port configurations. Baer Remaster inverted flare kits include two hard lines and the banjo fitting kits include two hard lines, four banjo bolts, and eight copper crush washers. Baer Remaster to general fit prop valve kit contains a single hard line with inverted flare fittings. Get a streamlined appearance that will look great at your next car show with Baer Brakes Remaster hard lines. Select the style and size needed for your application.
( 1 )
$199.95
LEED Brakes manual dual-bowl master cylinder upgrade kits will allow you to upgrade your factory single-bowl manual brake car to dual-bowl in no time! In each of these kits, you receive the brake line necessary to route from the new master cylinder to your factory distribution block. LEED also includes an adjustable combination valve to allow you to fine tune the amount of pressure your rear brakes receive in order to prevent rear wheel lockup. For those cars that require a pressure switch to activate the taillights, these combination blocks have one built-in to provide an easy connection.
( 12 )
$154.99
—
$244.99
The Right Stuff master cylinders are completely new units with no core charge. They offer a wide variety of designs to provide compatibility with manual brakes as well as power-assisted applications. Available in aluminum and cast iron, in single or dual reservoir configurations with several bore diameters to accommodate front disc/rear drum brakes or 4-wheel disc systems, they are also offered in a variety of finishes and lid attachment styles. Whether you're building a brake system from scratch, or updating a vintage system, The Right Stuff probably has what you need for your make and model.
( 245 )
$219.60
—
$283.95
SSBC-USA master cylinder and brake booster assemblies are available in nearly a dozen models cover a variety of applications from the 1950s, '60s, '70s, and '80s. These quality components are offered with master cylinder, a 7 in. or 9 in. booster, and hardware. Order the kit recommended for your vehicle.
( 6 )
$212.00
—
$258.00
Leed Brakes master cylinders are all-new units manufactured with the highest quality machined components. These units are offered as a direct replacement or specialty fitment for customized vehicles where more braking power is needed. Leed master cylinders are available in universal models, as well as for vehicle-specific applications from the 1960s, '70s, and '80s.
( 10 )
$179.99
—
$264.99
Cardone new power brake boosters have 100 percent OE-quality seals, diaphragms, and check valves installed for performance and reliability. All units are thoroughly vacuum-tested to ensure reliable performance. Each master cylinder and booster assembly is covered with an exclusive rust-prohibitive finishing process to extend on-car life. For easier installation, master cylinder output rods are pre-adjusted on applications where they're included. New mounting nuts and washers ensure proper, hassle-free installation. Make braking a breeze when you install economical Cardone new power brake boosters.
( 4 )
$110.50
—
$230.99
Cardone remanufactured hydroboost units feature a rust-prohibitive finishing process for long-term durability. OE quality seals, diaphragms, and check valves are installed on every unit for like-new performance and reliability. Master cylinder output rods are pre-adjusted (when included) for easier and faster installation and new mounting nuts and washers ensure proper, hassle-free installation. All units are 100 percent vacuum tested to ensure reliable performance.
( 48 )
$104.99
—
$322.99
Are you pushing the brake to the floor? That's a clear warning sign that it's time for The Right Stuff master cylinder and booster assemblies. Depending on disc-disc or disc-drum applications, some Right Stuff replacement assemblies include a proportioning valve with a bracket and stainless steel lines. Slowing your vehicle to a safe, efficient stop is much easier with a new master cylinder and booster assembly from The Right Stuff.
( 362 )
$219.60
—
$234.60
Cardone remanufactured power brake boosters have 100 percent OE-quality seals, diaphragms, and check valves installed for performance and reliability. All units are thoroughly vacuum-tested to ensure reliable performance. Each master cylinder and booster assembly is covered with an exclusive rust-prohibitive finishing process to extend on-car life. For easier installation, master cylinder output rods are pre-adjusted on applications where they're included. New mounting nuts and washers ensure proper, hassle-free installation. Make braking a breeze when you install economical Cardone remanufactured power brake boosters.
( 122 )
$100.99
—
$172.67
Trail-Gear master cylinders are excellent replacements for older pickups and 4Runners with smaller bore sizes. These units feature 1 in. pistons and residual valves for both front and rear disc brakes. They can be used with disc or drum brakes and they include reservoirs. Restore effective brake pedal performance with Trail-Gear master cylinders.
Not Yet Reviewed
$149.99
Summit Bucks
ACDelco brake boosters are built to factory specifications; they are direct replacement units made from durable materials to ensure proper fit and reliability. Available for both vacuum and hydraulic booster applications, they ensure that your brakes are not uncomfortably difficult to operate. Get back on the road and keep your brakes working efficiently with ACDelco brake boosters. Features include: * 100 percent new seals and O-rings * 100 percent leak-tested before going into the box * Cast-iron units are coated to help prevent rust and extend the life of the part * Diaphragm support plates are inspected for wear and replaced if necessary * Dust boots, diaphragms, and check valves are inspected and replaced if required * Housings are inspected for corrosion, wear, and deformities * New mounting nut and washer supplied on booster pushrod where applicable to ensure proper installation * Pre-adjusted master cylinder output rods where applicable
( 3 )
$251.99
Summit Racing™ power brake conversion kits create more stopping power. Upgrading your classic to power brakes is smart—and safer! Many older vehicles used single-reservoir master cylinders. Our conversion kits feature dual reservoir cast iron master cylinders. All parts are brand new, available for many applications from the 1940s and up, and some kits may include pedal rod extensions and mounting hardware.
( 332 )
$167.99
—
$274.99
Summit Racing™ master cylinder and brake booster combos deliver top-quality braking power and are designed to mount directly to your factory firewall. They work great as factory replacements or an upgrade from manual to power brakes for vehicles with automatic transmissions. Kit components are available in different sizes, styles, materials, and finishes for fitment on countless vehicles from the 1950s, '60s, and '70s. Make your quick stops effective and safe with Summit Racing™ combo kits!
( 40 )
$208.99
—
$264.99
The Right Stuff brake boosters offer more power-assist. If you're pushing your brake to the floor, or you've lost that vacuum feeling, may need to replace your brake booster. The Right Stuff brake boosters are made from quality materials to help you stop your vehicle with minimal pressure to your brakes. A brake pedal rod extension is included with some models. Order the universal or vehicle-specific brake boosters designed for your application.
( 264 )
$157.99
—
$215.99
The brake master cylinder is a vital part of your braking system. If not functioning properly, braking power and responsiveness can be reduced, putting your safety at risk. MustangSteve brake master cylinders are built with premium materials to ensure optimum braking performance—and a proper fit--in your classic car. Select the one designed for your vehicle.
Not Yet Reviewed
$133.99
Are you looking for a replacement brake master cylinder for your brake system? Dorman has you covered with their OEM replacement Dorman brake master cylinders. Dorman brake master cylinders deliver increased performance and reliability. Dorman has industry-leading brake master cylinder application coverage that is second to none. If you want maximum performance from your brake system, then you need one of these Dorman brake master cylinders.
( 276 )
$151.99
GM bolted 11 in. Delco-Moraine brake boosters to a bunch of its cars and trucks from 1967 to the early 1970s. Some cars came with "Delco-Moraine" stamped upside down on the front of the booster housing, while others were stamped the "proper" way. Still others were not stamped at all. No one can say with certainty which is "correct" for a specific car or model year, so The Right Stuff decided to make two versions of the Delco-Moraine booster--one with the upside-down stamp, one with the stamp right-side up. Pick the version you think was factory-correct for your car. Either way, you're getting a booster that looks and functions as The General intended. These boosters are officially licensed by General Motors, so they're factory-correct from the cadmium plating to the orientation of the Delco-Moraine stamp. And since the boosters are all-new, you'll have a reliable source of vacuum assist for your power brakes.
( 34 )
$207.99
—
$215.99
Classic Performance designs brake booster brackets to keep the master cylinder level and make it easier to convert to power brakes. Proper offset on the firewall gives you the correct position for smooth braking performance. These steel units are zinc plated for protection--and available for a variety of applications from the 1950s and '60s. Stop and go with confidence when you use parts from Classic Performance.
( 4 )
$248.99
Tuff Stuff Performance brake booster and master cylinder combos are top-of-the-class high performance pieces that are not only attractive, but also reliable to help get you home safely. These booster and master cylinder combos are built from hefty cast iron to exceed OEM specifications and then tested before shipping to provide you with maximum dependability. They come available in natural and triple chrome plate finishes, making your hot rod look good under the hood. Tuff Stuff Performance brake booster and master cylinder combos are assembled, plated, and then polished in-house by Tuff Stuff.
( 184 )
$204.99
—
$319.99
LEED master cylinder and brake booster combos deliver top-quality braking power and are designed to mount directly to your factory firewall. The Leeds brake booster assemblies work great as factory replacements or an upgrade from manual to power brakes. Make your quick stops effective and safe with LEED combo kits!
( 90 )
$251.99
Do you have that slow, sinking feeling when you hit the brakes? Maybe you need to replace your master cylinder. Summit Racing™ master cylinders are great replacements for your power disc brakes. These cast iron master cylinders have a dual bowl design with a natural finish and will maintain the proper amount of pressure that you need for braking. Whether you're replacing or choosing a master cylinder for your rod, Summit Racing™ can help.
( 3 )
$138.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
