Brake Systems - Engine KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

BD Diesel Ford 7.3L BrakeLoc Kits

BD Diesel Ford 7.3L BrakeLoc kits make the most of your Powerstroke's heat riser valve for less. These kits turn your factory heat riser valve into an electronically controlled exhaust brake. BD offers kits for both manual and automatic transmission models. Their low-cost solutions of engine retarding for towing utilize your OEM exhaust backpressure valve. They command the EBP valve to activate, as well as keep the lockup clutch of the torque converter engaged (on automatic transmission models). BD Diesel Ford 7.3L BrakeLoc kits are not substitutes, but the best economical alternatives you'll find to exhaust brakes.

2.5 out of 5 stars ( 2 )

$564.95

Strange Pro Series Lightweight Front Brake Kits

Strange Pro Series lightweight front brake kits are designed for spindle-mount wheels and feature their one-piece forged steel rotors. These lightweight, drag race-only brake kits also feature the Strange single-piston caliper kit. The caliper kit employs a unique slider assembly that features internal bearings and precision-ground sliders to prevent the calipers from binding or sticking. The single-piston calipers utilize square pads that slide freely, which prolongs pad life. Strange Pro Series front brake kits include: * Slotted, one-piece forged steel rotors * Strange single-piston billet calipers * Slider assembly * Soft square pads * Billet aluminum caliper mounts * Necessary mounting hardware * Kits weigh 16 lbs.

Not Yet Reviewed

$631.99

Strange Pro Race Steel Front Brake Kits

These Strange Pro Race steel front brake kits offer a tremendous weight savings over OEM brake components. The entire 4-piston brake kits, complete with bearings, hubs, rotors, pads, calipers, etc., weigh only 33.5 lbs. They are unsurpassed in detail, as is evident in the hub design. Each hub has one bolt circle. Instead of adding an additional bolt circle, Strange machined five large lightening holes to reduce rotating weight. The billet aluminum hub is further lightened by its scalloped design and fully machined billet aluminum hubcap.

4.18 out of 5 stars ( 28 )

$694.99

Strange Ford 9 in. Drum Brake Kits

These Strange Ford 9 in. drum brake kits will help your ride stop better than ever before. They include new steel backing plates, new wheel solenoids, bonded brake shoes, all-new hardware, and 11 in. steel drums. The drums are predrilled for 1/2 in. studs, but can machined to accept up to 5/8 in. studs. Stop your drum brake rear axle more quickly with one of these Strange Ford 9 in. drum brake kits.

Not Yet Reviewed

$534.99

Instant Rebate

PowerStop Z36 Truck and Tow Brake Upgrade Kits

PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z36 Truck and Tow brake upgrade kits are recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. They come with everything you need, including premium stainless steel hardware, for an easy, bolt-on installation. The low-dust Z36 Extreme ceramic brake pads are reinforced with carbon fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Evolution drilled, slotted, and zinc plated rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, you'll get an easy and affordable, bolt-on performance upgrade with PowerStop's Z36 Truck and Tow brake upgrade kits. Features and Benefits<ul><li>This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks</li><li>Proprietary Carbon-Fiber Ceramic Z36 brake pads enhance the strength of a typical ceramic brake pad compound to handle heavier loads</li><li>Stainless-steel pad shims resist the increased temperatures common on heavy duty applications</li><li>Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE</li><li>Drilled & Slotted performance rotors provide maximum cooling</li><li>Bolt-on upgrade for stock brakes, no modifications necessary</li><li>Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant</li><li>Brake rotors, pads & hardware engineered to work together to increase the overall braking power on vehicles with heavier loads</li><li>Rotors are zinc plated for maximum protection against rust</li><li>Buy with confidence from the originator & industry leader of brake kits</li></ul>

4.76 out of 5 stars ( 2787 )

$500.11

—

$748.23

ACDelco GM Genuine Parts Disc Brake Rotors

Get the General Motors quality you know and trust with ACDelco GM Genuine Parts brake rotors. By staying with the parts brand your GM vehicle came with, you'll have peace of mind that the fit and performance are up to the original specifications and high standards. These replacement disc brake rotors are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle; order the parts recommended for your application.

4.84 out of 5 stars ( 37 )

$521.99

—

$698.99

DBA Club Spec 5000 T3 Brake Rotors

Look "down under" for great stopping power; the Aussies from DBA have delivered their Club Spec 5000 T3 brake rotors. Teeming with technology, innovation, and great attention to detail, these 2-piece 5000 Series road-and-race rotors offer winning performance for motorsports and other extreme applications. Inside and out, they're designed for maximum cooling and ultimate braking power. Plus, the non-friction areas are painted with high-temperature engine enamel for "no-worries" corrosion resistance and lasting good looks. Choose the model designed for fitment on your vehicle. DBA's Club Spec 5000 T3 technology features: * XG150 high-carbon alloy iron—specifically formulated for high heat absorption and dissipation * Aerospace aluminum 6061 T-6 hats * Thermal Stability Profiling TSP—a unique process that enhances the microstructure of the rotor so they can take more heat for longer periods and maintain stability * T3 universal slot pattern—strategically placed to move gasses, heat, and debris away from the rotor surface for consistent stops, to dampen vibrations and harmonics for more responsive pedal feel, and eliminate the need for left and right discs * Kangaroo Paw ventilation—patented, high-tech system of 144 teardrop pillars that provide greater surface area, strength, and increased heat dissipation * Thermographic Temperature Monitoring TGHP—heat paint markings that change color at specific temperature thresholds, allowing you to monitor peak braking temperatures and rotor fatigue

Not Yet Reviewed

$507.54

—

$718.43

Detroit Speed Master Cylinder and Brake Booster Assemblies

Detroit Speed master cylinder and brake booster assemblies are designed to give your classic car's brake system a late model performance pedal feel. They're direct bolt-on kits engineered to work with most aftermarket brake systems. The assemblies include a dual-diaphragm booster, a master cylinder with a reservoir, and the proper mounting bracket. Order the model recommended for your vehicle application.

4.0 out of 5 stars ( 3 )

$654.95

Brembo Beyond EV Disc Brake Pad and Rotor Kits

The use of regenerative braking, in electric vehicles, entails a more discontinuous use of the friction brake compared to a car with a combustion engine. For this reason, special attention is required to avoid the corrosion of brake discs and brake pads. Brembo EV brake kits, comprised of brake discs with a special anti-corrosion treatment on the braking surface and brake pads dedicated specifically to electric cars, avoid early corrosion of the braking system, keeping it effective and safe for longer. For drivers, the anti-oxidation protection benefits are substantial. Select the kit designed for your vehicle. Features and benefits: * Dedicated solution for electric cars * Better Performance, more sustainability * Protects against oxidation, with no rust, less dust

5.0 out of 5 stars ( 3 )

$520.95

—

$646.92

ACDelco GM Genuine Parts Disc Brake Pads

GM Genuine Parts disc brake pads from ACDelco are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Disc brake pads are the friction material used in disc brakes that press against the brake rotor to stop the vehicle. These pads feature a friction-enhancing material that is bonded to steel backing plates. Hundreds of sets are available for fitment on countless vehicles from the 1980s and up. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Additional details: * Integral friction material molded to the backing plate for bond integrity * Premium shims, slots, and chamfers help to diminish noise, vibration, and braking harshness * Stamped backing plate allows for proper pad movement within the caliper assembly—reducing noise and brake pulsation, and protecting against premature wear * No curing is required

4.92 out of 5 stars ( 26 )

$701.99

—

$713.99

On Sale

Baer Brakes Remaster Master Cylinders

Baer Remaster is the new master cylinder built with what you need: enhanced quality, style, and options. The Remasters are engineered to match Baer braking performance and are offered as direct-replacements, with Ford, GM, and Mopar bolt patterns available. They can have a 15/16 in., 1 in. or 1 1/8 in. bore, providing an optimum balance between pressure and volume for great braking performance—with reasonable brake-pedal effort for most street and performance braking systems. These master cylinders feature a short, compact design that makes fitment easier for a variety of applications. They're also offered in right or left port position, with a choice of polished, hard anodized black, or hard anodized gray finishes. Baer Brakes Remaster master cylinders also feature: * Fully machined billet aluminum construction * Machined and knurled screw-in caps for easy access to fill (no tools needed) * Bolt-on firewall mount bracket—can be reused in other projects with a change of the bolt on the bracket * GM and Ford will use the same master (firewall-mount is designed to fit both); includes a bullet (insert adapter) for long pushrod applications * Anodized Remasters feature laser-etched logos and part numbers for a finished look

5.0 out of 5 stars ( 14 )

$562.95

$505.95

ACDelco GM Genuine Parts ABS Modulator Valves

GM Genuine Parts ABS modulator valves from ACDelco are designed, engineered, and tested to rigorous standards, and are backed by General Motors. This valve controls the flow of brake fluid into your brakes, providing the critical anti-lock feature. Over a hundred models are available for fitment on countless vehicles from the 1990s and up. Order the modulator valves recommended for your application. (GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles.)

5.0 out of 5 stars ( 1 )

$597.99

—

$616.99

ACDelco GM Genuine Parts Power Brake Boosters

ACDelco GM Genuine Parts power brake booster are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These boosters are force multipliers that cause additional force to be applied to the master cylinder for additional braking power. Offered in hydraulic and vacuum types, these power brake boosters are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Service your vehicle with confidence using the parts designed for your Chevrolet, Buick, GMC, or Cadillac.

5.0 out of 5 stars ( 1 )

$610.99

—

$684.99

On Sale

RT Off-Road Performance Brake Kits

Increase your braking response with RT Off-Road performance brake kits! They're engineered to withstand an outrageous amount of abuse in all types of driving conditions. Whether it's stop-and-go through the city or long distance routes, these rotor and pad combos provide maximum cooling to remove the chances of deterioration and potential warping. The brake components are designed to quickly expel water, gases, and debris from their surface for optimal performance. Select the RT Off-Road performance brake kit engineered for fitment on your specific Jeep submodel.

4.29 out of 5 stars ( 7 )

$642.99

$578.69

Wilwood TX6R Forged Radial Mount Calipers

Wilwood TX6R radial mount 6-piston calipers are engineered and purpose built for severe-duty service on heavy-duty trucks, SUVs, and Class 1, 2, and 3 armored vehicles up to 14,000 lbs. GVWR. These Tactical Extreme (TX) calipers combine a forged aluminum body, stainless steel pistons, large pad volume, and the ability to accommodate brake rotors up to 1.50 in. thick, making them the ultimate choice for high-strength, lightweight, and tactical level braking capacity for all types of highway and off-road extreme-duty service. Wilwood TX6R radial mount 6ix-piston calipers are offered in hard anodized and powdercoated finishes.

Not Yet Reviewed

$629.88

—

$741.06

Hawk Performance DTC 80 Brake Pads

Hawk Performance DTC 80 brake pads give you the braking power to compete on all courses. Their products have dominated motorsports for more than 25 years, and this revolutionary compound is taking that domination to a new level. Intended for the hardest braking circuits where the most demanding brake products are required, DTC 80 is a compound engineered for use on all circle track and road racing venues where a high-torque, high-temperature-resilient friction material is a must. With a formulated flat coefficient of friction at high-temperature levels, DTC 80 brake pads provide consistent performance corner after corner. Track-tested and proven effective, this formulation offers lower wear rates and higher torque values than other competitive materials on the market today. The end results are better car control, more confident brake zone feel, and stunningly predictable performance. Hawk DTC 80 brake pads feature: * High initial bite * Consistent brake torque level over temperature range * Consistent with pressure at high temperatures over 1,200 F * Superior pad and rotor wear * High-torque * 500 to 1,700 degrees F operating temperature * 600 to 1,500 degrees F optimal temperature range

Not Yet Reviewed

$566.99

—

$620.09

Wilwood Forged Superlite 4 Radial Mount Calipers

Engineered to deliver the pad wear performance advantages of differential bore pistons, Wilwood forged Superlite 4 radial mount calipers also provide ultimate heat protection in the ST models. The differential piston bores compensate for leading-edge mechanical loading and temperature variances across the pad face. The Thermlock pistons in the ST models block heat transfer in the pads and reduce temperatures in the caliper, fluid, and seals by up to 25 percent over standard stainless steel pistons. Additional information: * Billet aluminum caliper material * Black anodized or nickel plated finish * Four-piston calipers * Various rotor thickness and piston diameters available * Calipers include Wilwood logo

5.0 out of 5 stars ( 1 )

$605.70

Performance Machine Speedster Black Anodized Rotors

Performance Machine Speedster rotors are high performance, CNC-machined motorcycle brake discs, often full-floating, featuring durable 420 stainless steel outer bands with unique cutouts and lightweight aluminum inner carriers. They're designed for improved heat dissipation, weight reduction, and enhanced aesthetics, typically pairing with PM wheels for custom motorcycle builds. These brake rotors use a swept drilling pattern and special finishes like Black Ops or Gold Ops for style and function, resisting warping and improving stopping power. Additional details: * Full-floating design: The outer braking surface moves independently from the inner carrier, allowing for thermal expansion and reducing stress, which prevents warping and improves pad contact * Materials: Made with a hardened 420 stainless steel outer band and a strong 7075-T6 aluminum inner carrier for reduced weight and increased strength * Features a unique, custom-cut braking surface engineered to match specific Performance Machine wheel designs * Enhances heat dissipation, reduces weight (unsprung weight), and provides better braking performance and feel * These are popular upgrades for Harley-Davidson® riders and custom bike builders looking to improve both the braking performance and the distinctive visual style of their motorcycles, specifically with Performance Machine wheels

Not Yet Reviewed

$520.95

SSBC-USA B6-Brawler Rear Caliper Upgrade Kits

When you want brakes that pack a big punch, choose SSBC-USA B6-Brawler caliper upgrade kits. They provide your vehicle with the knockout stopping power, style, and performance it needs to get the job done. Designed and engineered to provide ridiculously more stopping power, the 6-piston rear B6-Brawlers overpower the empty space behind your wheels, improving the overall look and style of your everyday ride or prized, custom build. They're built from high-quality, aircraft-grade T6061 billet aluminum and are ready to bolt-on to the rear axle of your vehicle. These SSBC-USA kits include high performance brake pads, all necessary hardware, and full instructions—everything in one box. The Brawler calipers are available in a clear anodized finish or with a red or black powdercoat finish. Fully assembled, easy to install, and ready to beat the brakes off the competition; upgrade your current rear brake system with CNC-machined, lightweight, large-bore, American-made calipers that bolt directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system with easy installation. Choose the kit recommended for your vehicle. Additional features and benefits: * Heavy-duty stainless steel pistons * High-friction, low-dust brake pads * Full-size stainless steel bleeders * Bridge bolts offer maximum stiffness * Stainless steel pad clips * Dual seals (pressure and dust) * Improves the look of your vehicle * Direct-fit—no brackets required

Not Yet Reviewed

$745.00

PowerStop Z23 Daily Driver Evolution Coated Brake Upgrade Kits

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes, no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. PowerStop Z23 Daily Driver Evolution coated brake upgrade kits are engineered to improve the braking performance of the vehicle you use every day. These complete kits include Z23 brake pads, fully coated rotors, and stainless-steel hardware—everything you need for an affordable, easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the carbon-fiber ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. The pads are paired with fully coated rotors to protect against rust and corrosion without diminishing braking performance. Give your daily driver the easy and affordable performance upgrade it deserves. Select the Z23 Daily Driver Evolution brake upgrade kit designed for your application needs.

Not Yet Reviewed

$518.99

—

$657.99

Hawk Performance ER-1 Brake Pads

The newest addition to the Hawk Performance Motorsports brake pad catalog is ER-1, an ideal compound for a broad range of the most intense sports car events. The new, proprietary endurance racing brake pad marks an extraordinary leap forward in the racing friction market for Hawk. Specifically engineered for endurance racing, ER-1 is designed to offer Hawk's trusted stopping power, hour after hour. The well-rounded nature of this motorsports brake pad compound delivers ideal modulation and pedal communication, providing a new option not just for endurance racing, but dirt and Circle Track, HPDE, time trials, and even spring racing. Research and development is paramount to Hawk's ongoing strategy, with rigorous testing performed on in-house dynamometers—as well as under the most grueling and diverse conditions in motorsports, across a wide range of vehicles and environments. Hawk engineers worked with some of the best racers and teams in the U.S., and refined the components of this compound to create the optimal recipe that delivers the most ideal endurance pad on the market today. ER-1 comes to the market with a wide thermal range, groundbreaking torque consistency, excellent modulation, and unmatched lifespan: * Specific emphasis on modulation, release, and pedal communication * Ideal for light- to medium-weight vehicles in endurance racing, HPDE, track day events, time trials, and more * Superior pad and rotor wear * Consistent medium to high friction * 400-1600 degrees F operating temperature * 700-1,100 degrees F optimal temperature range Endurance racing is becoming more and more available in today's motorsports schedule, both professionally and on a grassroots level. Racing a car for 8, 16, or sometimes 24 hours straight brings an entirely new set of challenges to both the driver and the vehicle. Hawk developed ER-1 to solve the brake pad part of that equation—and in doing so, they created a pad that is also ideal for a variety of other motorsports applications. ER-1 is the first brake pad compound in aftermarket to meet the vigorous pad and rotor wear rates demanded to compete in endurance racing, without sacrificing performance. With a coefficient of friction above .45μ, over a 1,600 degree F range, ER-1 still provides the immense stopping power customers have come to expect from Hawk Performance. Order the brake pad set recommended for your vehicle.

Not Yet Reviewed

$516.59

SSBC-USA B6-Barbarian Rear Caliper Upgrade Kits

When you want brakes that are built tough, choose SSBC-USA B6-Barbarian caliper upgrade kits. They provide your vehicle with the modern stopping power, style, and performance it needs to get the job done. Designed and engineered to provide ridiculously more stopping power, the 6-piston rear B6-Barbarians overpower the empty space behind your wheels, improving the overall look and style of your everyday ride or prized, custom build. The calipers are built from high-quality, aircraft-grade T6061 billet aluminum and are ready to bolt-on to the rear axle of your vehicle. These SSBC-USA kits include high performance brake pads, all necessary hardware, and full instructions—everything in one box. The Barbarian calipers are available in a clear anodized finish or with a red or black powdercoat finish. Fully assembled, easy to install, and ready to beat the brakes off the competition; upgrade your current rear brake system with CNC-machined, lightweight, American-made calipers that bolt directly onto your stock axle, providing you with the performance and durability you expect from a modern brake system. Choose the specific kit for your vehicle. Additional features and benefits: * Heavy-duty stainless steel pistons * High-friction, low-dust brake pads * Bridge bolts offer maximum stiffness * Stainless steel pad pins, anti-rattle pad clips, and bleeders * Heavy-duty seals (pressure and dust) * Direct-fit—no brackets required * Works with factory hydraulics and ABS * Faster braking response time * Fits behind most factory wheels and uses stock rotors

Not Yet Reviewed

$712.00

Wilwood TX4R Forged Radial-Mount Calipers

Wilwood TX4R forged radial-mount calipers are engineered and purpose-built for severe-duty service on heavy-duty trucks, SUVs, and Class 1, 2, and 3 armored vehicles up to 14,000 lbs. GVWR. Tactical Xtreme 4-piston calipers combine a forged aluminum body, stainless steel pistons, large pad volume, and the ability to accommodate brake rotors up to 1.50 in. thick. These features make the TX4Rs the ultimate choice for high-strength, lightweight, and tactical level braking capacity for all types of highway and off-road extreme-duty service applications. Wilwood TX4R forged radial-mount calipers have a hard anodized finish on base models with options for gloss black or red powdercoat finishes. Choose the ones you prefer for your application.

Not Yet Reviewed

$741.06

Wilwood ProMatrix OE Brake Upgrade Kits

Wilwood ProMatrix OE brake upgrade kits provide the sports driving enthusiast with the benefits of Wilwood's championship race technology on their OE caliper equipped machines. They are available with Wilwood SRP or GT series directional vane rotors and are matched with PolyMatrix brake pad sets and DOT-approved stainless steel reinforced brake hoses. The Wilwood ProMatrix OE brake upgrade kits provide cool running with improved overall system performance for enhanced street driving and track day competition. The kits are application-engineered as direct bolt-on replacements with full compatibility to the OE calipers, hubs, mounting, master cylinder, and ABS systems.

Not Yet Reviewed

$579.06

40 Results Found For "Engine"