Availability
Showing In Stock Items. Show All 624 Items.
Wilwood master cylinder pushrods will keep your master cylinder operating correctly. They are manufactured from steel and have a threaded end for easy attachment to the master cylinder.
( 40 )
$76.17
Wilwood brake proportioning valves are adjustable between 100 and 3,000 psi (depending on model) with a twist of a knob or the flip of a lever, and most can reduce pressure up to 57 percent. They let you adjust brake bias quickly and easily to compensate for changing track conditions, or for big and little tire combinations.
( 289 )
$53.29
—
$105.81
Wilwood high-volume master cylinders are the perfect solution for your braking needs. These master cylinders feature high-pressure die-cast bodies with an 8.2oz integral reservoir. Available in several bore sizes and utilize a 1.430 in. piston stroke.
( 49 )
$76.58
The Right Stuff master cylinders are completely new units with no core charge. They offer a wide variety of designs to provide compatibility with manual brakes as well as power-assisted applications. Available in aluminum and cast iron, in single or dual reservoir configurations with several bore diameters to accommodate front disc/rear drum brakes or 4-wheel disc systems, they are also offered in a variety of finishes and lid attachment styles. Whether you're building a brake system from scratch, or updating a vintage system, The Right Stuff probably has what you need for your make and model.
( 244 )
$71.99
—
$89.99
A Summit Racing™ power brake booster is the perfect addition to your street rod or custom application. The boosters use vacuum from the engine, or a standalone pump, to assist in slowing down the vehicle as you depress the brakes. This makes the brake pedal much easier to press and improves the braking response of the vehicle. These power brake boosters are available in multiple diameters, in single or dual-diaphragm designs to best fit your application. Choose between the brake booster only; or the brake booster and brake pedal rod extension kit, which makes installation even easier.
( 95 )
$93.99
—
$108.99
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z36 Truck and Tow carbon fiber ceramic brake pads are designed as an upgrade over stock brakes to reduce brake dust and eliminate noise for those that tow and haul, as well as the off-road enthusiast. These brake pads are made with a low-dust ceramic formula, infused with carbon fiber, to strengthen the compound and provide severe-duty stopping power for trucks and SUVs. Premium stainless-steel hardware, along with ceramic brake lubricant, is included with the Z36 brake pads making it easier to complete your brake job.
( 352 )
$50.29
—
$108.58
ACDelco Gold brake master cylinders use both aluminum and iron castings, making them a high-quality replacement for many vehicles on the road today. These master cylinders contain both ethylene propylene and styrene butadiene rubber components to provide superior resistance to heat, corrosion, and leakage. ACDelco Gold brake master cylinders ready to bench bleed and install right out of the box! They're manufactured to exceed your expectations for fit and performance; order the model recommended for your application.
( 108 )
$51.50
—
$101.99
Doing an upgrade? The Right Stuff brake proportioning valves and blocks can help you get the job done right. Restoring your classic usually means stepping up your stopping power and The Right Stuff offers quite a selection of proportioning valves, distribution blocks, metering blocks, and combination valves to get your drum, disc, or conversion system into optimum operation. You need the right amount of pressure and the right amount of fluid distributed to your brake lines for reliable, safe performance. To gain proper function and fit, renovate your brake system with brake proportioning valves and blocks from The Right Stuff.
( 138 )
$58.99
—
$107.99
Brembo offers Low-Met brake pads for a wide range of European and domestic vehicles, including BMW, Saab, Mercedes-Benz, Audi, Chrysler, Volkswagen, Mini Cooper, Toyota, Cadillac, Dodge, Ford, Chevrolet, Tesla, Volvo, Mazda, Jaguar, Acura, Hyundai, Genesis, Fiat, Land Rover, Porsche, Infiniti, Buick, Alfa Romeo. Specifically designed for the North American market, this Brembo formulated friction material with premium shim delivers comfortable, quiet, smooth braking and cleaner wheels. Low-Met brake pads are formulated for superior braking performance in all driving conditions. They're comparable to the OE pads, with ECE-R90 approval. Premium stainless steel hardware and lubricant are included with most orders. Enhance your braking power with a set of Low-Met brake pads from Brembo!
( 6 )
$50.78
—
$117.81
Wilwood brake caliper mounting brackets are designed to keep your caliper in the right position for your aftermarket brake kit. They're made from quality aluminum or steel and feature a black finish to resist rust and corrosion. These replacement brackets are available for dozens of front and rear axle model applications. Order the individual bracket or set recommended for your brake kit part number.
( 40 )
$51.08
—
$112.86
Baer Brakes proportioning valves allow you to tweak brake bias in big or little increments simply by twisting the large adjuster knob as needed. They're black anodized for a long-lasting finish. Features include: * Complete with all fittings * Mounting bracket included * Laser-etched body
( 7 )
$79.95
Keep dust and debris from getting to your brake rotor and calipers with Auto Metal Direct brake dust shields. They are the engineered to exact OE specifications and stamped from high-quality steel. They are finished with the correct zinc plating for that factory original look. Choose Auto Metal Direct brake dust shields to ensure years of trouble-free performance.
( 5 )
$65.99
Overheated brakes make for longer stopping distances and missed turns on the track. The Summit Racing™ high-temp brake duct cooling hoses are made from high-temperature, 2-ply silicone with fiberglass reinforcement and a spiral spring steel structural wire. The 3.00 in. diameter silicone hose retains the flexibility of neoprene, but a much higher temperature rating of 575 degrees F. They're available in black, blue, and red, in 120 in. lengths.
Not Yet Reviewed
$104.99
Add safety your brake system with LEED brake proportioning valves! These brass prop valves are equipped with a safety switch that's designed to sense when your brake system is producing unequal or lower pressure to one or more of the wheels—usually caused by a component failure. Without this valve installed, if a component fails on your vehicle, the brake pedal will drop to the floor as you pump the pedal, with little to no braking. Don't take chances! Order the LEED Brakes brake proportioning valves recommended for fitment on your application.
( 5 )
$99.99
—
$109.99
Cardone remanufactured power brake boosters have 100 percent OE-quality seals, diaphragms, and check valves installed for performance and reliability. All units are thoroughly vacuum-tested to ensure reliable performance. Each master cylinder and booster assembly is covered with an exclusive rust-prohibitive finishing process to extend on-car life. For easier installation, master cylinder output rods are pre-adjusted on applications where they're included. New mounting nuts and washers ensure proper, hassle-free installation. Make braking a breeze when you install economical Cardone remanufactured power brake boosters.
( 121 )
$53.30
—
$186.99
Wilwood Smart Pad BP-10 brake pads feature a medium-friction compound with the low noise and low dust of a street performance compound, plus the increased friction characteristics of a semi-metallic race compound. They have smooth engagement, with consistent response from a flat torque curve throughout their entire effective temperature range. These pads have good low-to-middle temperature wear rates, they bed quickly, and provide a fast response without excessive abrasion on vented iron rotors. They are ideal for a variety of high performance street/strip, drag race, and track-day categories using vented iron rotors. They also provide light-to-medium braking on dirt tracks, including late models, Modifieds, sportsman, and street stocks.
( 111 )
$50.25
—
$99.28
Brake and/or clutch efficiency begins with Classic Performance master cylinders. These replacement units are manufactured from high-quality materials such as cast iron or aluminum, and are available in a variety of sizes, styles, and finishes. The master cylinders include the cap to seal out air and protect the fluid from contamination.
( 47 )
$68.99
—
$88.99
Wilwood's BP compound SmartPad Series offers multiple friction options, allowing you to optimize brake response to track conditions and weather. Their BP-28 pads offer medium-high friction and a low-temperature response with flat torque from 100 to 1,200 degrees F. Wilwood Smart Pad BP-28 brake pads deliver a smooth predictable pedal feel, medium-low pad wear, and high performance as a street/track and race pad. They are fully compatible with steel, stainless steel, and titanium rotors.
( 3 )
$108.40
These vacuum canisters from COMP Cams capture an extra shot of vacuum from your engine for your power brakes. They are made for cars equipped with big cams and power brakes. These units approximately double the volume of vacuum available for your power brakes. They are recommended for cars with 14 in. of vacuum or less.
( 47 )
$73.99
—
$92.95
Brembo Prime UV Coated brake rotors are developed as direct replacements that meet or exceed OEM specifications. Environmentally friendly, the solvent-free UV coating offers superior protection for the discs, including braking plate surfaces. High-carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included is a fixing screw kit with all the necessary hardware for simple and worry free installation. UV technology, a shiny metallic effect, and respect for the environment: just three extraordinary features of Brembo coated rotors. And with an extended range covering a multitude of vehicles, you should have no problem finding the correct fit for your vehicle.
( 9 )
$51.28
—
$117.50
Raybestos R-Line brake drums offer premium, high-quality OE replacements for the front or rear of your car, truck, or SUV. These vehicle-specific drums provide consistent quality, strength, and performance—plus reduced noise. Castings meet SAE J431/G3000 specifications with a 30,000 psi tensile strength.
( 76 )
$51.99
—
$117.99
Eliminate premature rear wheel lockup with LEED Brakes adjustable brake proportioning valves. These aluminum units install in your rear brake line, after any distribution blocks, and allow you to reduce the amount of pressure going to the rear brakes. They will help eliminate any premature rear wheel lockup, as well as provide you with better control of your vehicle during hard braking. LEED proportioning valves are available in different inlet/outlet styles; order the model best suited for your vehicle application.
( 6 )
$64.99
These Wilwood HD fixed mount brake rotor hats are manufactured from a premium-grade aluminum alloy offering high strength, low weight, and show-quality appeal. They feature straight bell construction with a flanged rotor mount ring. These rotor hats provide maximum radial clearance between the caliper body and the hats. They require the use of the correct Wilwood rotor bolt pattern for installation.
( 13 )
$111.10
Wilwood's PS-1 calipers are compact, lightweight (only .93 lbs.) and combine the strength of cast aluminum construction with a sleek, low-profile design. These calipers utilize two stainless steel deep-cup pistons to minimize heat transfer from the .30 in. thick pad to the brake fluid, while employing high-temperature, square-piston seals to control piston retraction. Internal crossover brake fluid passages eliminate the use of external crossover tubes. They're designed, engineered, and manufactured in the USA.
( 2 )
$107.92
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
