Availability
Showing In Stock Items. Show All 122 Items.
Wilwood SC Series calipers provide an inexpensive solution to the braking needs of recreational, agricultural, and industrial vehicles. These floating, diecast aluminum calipers feature a single-piston design with a fitted dust seal to prevent contamination, dual bleed fittings for versatility in mounting position, and fluid inlets in M10 x 1.0 banjo. Wilwood SC Series calipers are designed and engineered strong and compact.
( 3 )
$67.93
—
$74.10
Wilwood GM metric series brake calipers are direct replacements for 1978 and later D154-type GM metric calipers. Weighing in at a mere 2.97 lbs., they provide a substantial weight savings over cast iron OE calipers. The real strength of these calipers comes from their triple-bridge configuration, which provides higher clamping efficiency through lower deflection. The overall results are stronger, lighter, and more efficient aluminum calipers. The caliper bodies are precision-cast, using a tight grained, high-density aircraft alloy. Stainless steel pistons provide improved fluid protection with high resistance to corrosion and low heat transfer. Each caliper is fully machined, assembled with high-temperature seals, and tested in-house by expert Wilwood technicians to ensure top quality and peak performance.
( 5 )
$106.75
These EBC R series sintered brake pads feature copper material made in EBC facility. These R series of heavy duty ATV and Moto-x pads have become an aftermarket standard offering high durability, high resistance to contamination by mud, water, sand and grit. This feature offering reduced disc damage and long pad life.
( 5 )
$50.31
—
$70.07
EBC 3GD Series Sport rotors are dimpled and slotted and precision-machined using premium-quality castings. Designed with wide-aperture scraper slots and blind-drilled holes, these 3GD rotors draw cooler air in and reduce temperatures for greatly reduced brake fade. Plus, their dimpling helps them to avoid stress cracks. Able to expel dirt, dust, and gases, EBC Sport rotors also maintain flat and parallel pad wear for better pad contact and better braking. These high performance rotors are available in a sporty silver corrosion resistance finish that not only looks great, but also prevents corrosion. Enhance the performance and looks of your car with EBC 3GD Series Sport rotors. Additional information: * Dimpled rotors were invented by EBC; often imitated because of its pad degassing without "through drilling" holes which promote rotor cracks * 3GD rotors passed European R90 brake safety tests and were shown to run 100 degrees F cooler than non-slotted rotors * Directional--the sweeping grooves and spotted pattern should point to the rear of the vehicle * All slotted rotors increase in air noise as the rotor passes beneath the pads under normal driving and braking; EBC's sister USR Sport rotor range is much quieter yet offers similar performance * Solid rotors are also available for some vehicle makes and models
( 182 )
$104.70
—
$111.31
EBC USR Ultimax Series sport brake rotors offer quiet performance. Precision-machined using premium-quality castings, these super-quiet slotted sport rotors feature a narrow-profile slot pattern that cools and de-gasses brakes and eliminates air noise. Ultimax sport rotors also remove gas, dirt, water, and debris, while providing parallel pad wear for improved braking. And, their silver corrosion resistant finish helps reduce corrosion. Find the model designed for fitment on your vehicle. When noise is a concern, choose the quiet performer—EBC USR Ultimax Series sport rotors.
( 71 )
$94.84
—
$110.70
EBC RK Series Premium OE-style rotors offer factory quality and performance for your vehicle. Designed from superior G3000 gray iron, these Premium rotors are precision-machined, balanced, and 100 percent one-by-one runout inspected to guarantee zero distortion out of the box. Plus, their coated finish looks great while preventing corrosion. EBC RK Series Premium OE-style rotors are an ideal choice to keep your daily driver braking safely. Order the model designed for fitment on your car or truck.
( 111 )
$63.42
—
$114.17
These Wilwood Dynalite series brake calipers are compact, powerful, and lightweight. They feature a strong compact aluminum-alloy housing, stainless steel deep-cup pistons to reduce heat transfer from your pads to your brake fluid, and high-temperature square piston seals to control piston retraction.
( 4 )
$104.13
Wilwood Dual Hydraulic Series calipers offer step bore pistons with unique primary braking circuits. The calipers are machined from aluminum with a clearcoat finish. They're available in one or two piston models, with or without a parking brake provision. Order the calipers with options preferred for your application.
Not Yet Reviewed
$113.26
EBC SV Series ATV brake pads are manufactured from high-density, sintered copper alloy for the longest possible life in utility applications on ATVs, especially in wet, muddy, dusty, and dirty conditions. These pads are designed for off-road applications.
( 2 )
$53.74
—
$54.86
The Right Stuff brake calipers are Stock Series replacements for your worn-out originals. These cast iron units are offered in a natural or powdercoat finish, with one or four pistons—and some models include brake pads. Order the calipers designed for fitment on your specific vehicle.
( 72 )
$84.99
—
$102.99
PowerStop Autospecialty OE replacement brake calipers bolt directly in place of the stock calipers. The calipers and the brackets are remanufactured, and the calipers are 100 percent pressure-tested to verify piston operation as well as to prevent any possible leaks from occurring. Every caliper is expertly assembled using new seals, slide pins (where applicable), dust boots, bleeder screws, and stainless-steel brake pad abutment clips, then inspected for overall quality and safety. High-temperature EPDM rubber dust boots and premium silicone lubricant are used for smoother operation and extended life in extreme conditions. PowerStop Autospecialty OE replacement brake calipers are perfect for the budget conscious-consumer looking for quality stock replacements.
( 34 )
$55.61
—
$109.38
Cardone remanufactured brake calipers are the economical choice when replacing your worn-out OE parts. An essential component of a disc braking system, calipers slow your wheels by creating friction between the pads and rotors. These refurbished units offer a high-quality, low-cost alternative to new calipers. Cardone meticulously rebuilds, greases, and thoroughly inspects the final product before shipment. The calipers are offered with or without brackets (depending on the application) and include hardware. Thousands of options are available for fitment on virtually every make/model vehicle.
( 318 )
$50.99
—
$233.99
ACDelco Gold remanufactured friction-ready disc brake calipers use both aluminum and iron castings, making them ideal premium aftermarket replacements for many vehicles on the road. By utilizing the automotive industry practice of remanufacturing disc brake calipers, any damaged or obsolete parts are replaced and are 100 percent end-of-line tested to help ensure they perform to ACDelco specifications. In addition, remanufacturing benefits our environment by returning components back into service, rather than processing them as scrap or disposing of them. Order the model designed for fitment on your vehicle.
( 42 )
$52.50
—
$104.99
Wilwood brake caliper mounting brackets are designed to keep your caliper in the right position for your aftermarket brake kit. They're made from quality aluminum or steel and feature a black finish to resist rust and corrosion. These replacement brackets are available for dozens of front and rear axle model applications. Order the individual bracket or set recommended for your brake kit part number.
( 40 )
$81.11
—
$105.81
EBC heavy-duty Greenstuff Elite organic brake pads present an excellent solution for 4x4 use, offering the benefit of longer life and better resistance to off-road conditions like dust, sand, etc. They're ideal as upgrades for your SUV or light truck with an improved brake effect of 10+ percent. Made from a high-temperature, stable material, EBC's Greenstuff Elite pads feature Nucap NRS hooks on the back plates to eliminate the chance of pad debond. Additional features and benefits: * Medium dusting factor makes these cleaner pads than stock * Capable of repeated heavy brake use without brake "fall-off" * Very minimal disc/rotor damage characteristics * Superb brake control and pedal response full grade are better than stock * Features red "brake in" surface coating for instant safe braking after install
( 153 )
$56.10
—
$122.60
Wilwood Ultralite 32 curved vane rotors offer less weight and cooler high performance. These UL directional vane rotors provide an excellent balance of efficient cooling and lower rotating mass on hard braking dirt tracks or rear axle service on pavement cars. Cast from premium grade, long grain carbon iron, Wilwood Ultralite 32 rotors offer long wear, high thermal stability, and resistance to distortion. These rotors are production machined and well suited for a wide range of sportsman racing categories. Street use or moderate racing Wilwood Ultralite 32 directional vane rotors bring high performance to your ride.
( 2 )
$69.42
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z36 Truck and Tow carbon fiber ceramic brake pads are designed as an upgrade over stock brakes to reduce brake dust and eliminate noise for those that tow and haul, as well as the off-road enthusiast. These brake pads are made with a low-dust ceramic formula, infused with carbon fiber, to strengthen the compound and provide severe-duty stopping power for trucks and SUVs. Premium stainless-steel hardware, along with ceramic brake lubricant, is included with the Z36 brake pads making it easier to complete your brake job.
( 350 )
$60.36
—
$106.61
Centric semi-loaded calipers are remanufactured to meet their exacting standards--ensuring worry-free performance for the life of every caliper. Each Centric caliper is 100 percent pressure-tested and inspected to guarantee proper operation and fitment. Centric semi-loaded calipers include hardware and brackets where applicable. Centric Parts industry-leading caliper remanufacturing includes: * Each caliper core is inspected, identified, and disassembled * Reusable components are re-inspected and cleaned * Parts are tumble-blasted with steel shot to remove rust or scale and are as clean as new parts from the foundry * All calipers are treated with an anti-corrosion finish * Each caliper is thoroughly inspected before reassembly * Threaded ports and bleeder holes are chased to eliminate cross threading and ensure leak-free performance * All bores are brushed and cleaned to ensure proper fitment and performance of the new boots and seals * Pistons, boots, and seals are installed using appropriate lubricant and according to OEM manufacturing specifications * Every caliper is tested on Centric's custom testing equipment to ensure that it meets OE specifications right out of the box * After testing, all caliper identities are confirmed * Only then are they are boxed, labeled, and shipped
( 80 )
$51.99
—
$64.99
ACDelco GM Genuine Parts remanufactured disc brake calipers use both aluminum and iron castings, making them the ideal premium aftermarket replacements for vehicles on the road. By utilizing the automotive industry practice of remanufacturing disc brake calipers, any damaged or obsolete parts are replaced and are 100 percent end-of-line tested to help ensure they perform to ACDelco specifications. Manufactured with GM Genuine Parts specifications for fit, form, and function, the disc brake calipers offer the quality performance and long service life you expect from General Motors. Order the model designed for your specific vehicle.
Not Yet Reviewed
$57.99
—
$93.99
Raybestos Element3 brake calipers provide hassle-free installation and optimal performance for nearly any caliper replacement application. They are painstakingly engineered to meet or exceed OE-replacement performance standards with 100 percent new components, and no core return. These friction-ready calipers conveniently provide the freedom to customize brake pads, making them ideal for high VIO and problem applications. Raybestos Element3 brake calipers bring over a century of aftermarket brake part experience to your vehicle. Features, items, and specs: * Aluminum or zinc-plated cast iron housing provide superior corrosion prevention and closely resemble OEM finish * Meets ASTM B117 standard 96-hr. salt spray corrosion resistance test * Plated brackets where required * EPDM70 rubber components for superior heat resistance, performance, and durability * Silicone boots for heavy-duty applications * Hardware for brackets and pad abutment, where applicable * Pre-lubricated guide pins * Extensive testing includes the following standards: SAE J1603, JASO C446, SAE J1713, ASTM B117
( 39 )
$55.99
—
$107.99
Classic Performance offers replacement brake calipers for your stock-style applications, as well as their performance Big Brake kits. The stock-style features a cast iron construction for long-lasting durability, and they're available in either a natural or a powdercoat finish. The Big Brake kit replacement calipers are available in cast iron or aluminum, depending on application. Classic Performance brake calipers will use all OEM type hardware, brake pads, and brake line attachment fittings. Order the model designed for your application.
( 43 )
$68.99
—
$98.99
Stopping power is key to driving safely—and AFCO Racing metric GM calipers help ensure your ability to stop when needed. Designed with AFCO Racing track and performance building experience, these calipers are engineered to the same high standards as all their components. Race fast, stop quick, and drive safe with AFCO Racing metric GM calipers.
( 9 )
$139.99
EBC Bluestuff NDX brake pads are made with a high-friction sport and race material that can be used for aggressive street and certain track applications. These replacement pads feature great bite when cold, a progressive brake feel, and the ability to bring a car to a complete stop. Deep V-grooves assist in venting—and catching the dirt, dust, and debris that are inevitable in track use. The EBC chemical interlayer system used on Bluestuff NDX range pads is a harder material designed for heavy-duty race applications requiring the extra security of bond strength. The effect of the interlayer is to triple the shear strength of common organic brake pads over non-interlayer versions. These pads bed-in quickly and easily, wear evenly, and are less harsh on rotors than other race pads. For true race-quality braking that can go from the track to the street, order the EBC Bluestuff brake pads designed for fitment on your make and model.
( 20 )
$96.38
—
$109.35
Make EBC Redstuff ceramic brake pads your low-dust replacement option. Redstuff pads reduce dust approximately 80 percent compared to OEM pads—and less dust also means less rotor wear. So, you'll enjoy longer lasting rotors and pads, plus great braking performance. These EBC pads are made with Aramid fiber-based brake compound enhanced with ceramic particles—a superb option for your fast street car, highly tuned import, muscle car, and even your luxurious European car. There are a lot of choices in brake pads; opt for clean wheels, no noise, and less dust with EBC Redstuff ceramic brake pads. Order the set designed for fitment on your make and model.
( 201 )
$73.27
—
$107.21
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
