Availability
The Right Stuff Street Series disc brake conversion kits feature all the quality components needed to convert your front or rear brakes to disc. Offered for both manual and power braking systems, Street Series kits are application-specific, maintain your vehicle's stock height or provide a 2 in. front drop, and are available with numerous component and finish upgrade options to make your braking system your own. So what's stopping you? Hundreds of kits are available; choose The Right Stuff Street Series conversion recommended for your vehicle.
( 19 )
$1,500.60
—
$2,146.95
Making drag race vehicle builds much easier, Wilwood's XRD single caliper dynamic mount drag race brake kits package their XRD calipers and 11.25 in. super alloy scalloped and drilled rotors that are compatible with many popular drag race rear axle flange types. These kits are perfect for racing cars with wider tires that rely heavily on the rear brakes for more stopping power. These single caliper kits star Wilwood stress-flow forged aluminum XRD calipers, featuring the latest FEA (finite element analysis) computer design technology to shed weight while maintaining rigidity. Choose the configuration best suited to your vehicle's weight, power, and chassis setup. Kit features: * XRD calipers -- Forged aluminum, 4-piston -- Type III hard anodized inside and out, including piston chambers -- High temperature seals * SA scalloped rotors -- Lightweight 11.25 in. rotors -- Allow more clearance for use on typical 15 in. rear beadlock wheels -- High resistance to thermal distortion * Lug-drive dynamic rotor mounting system uses a large single internal snap-ring that retains the rotor in the hat, allowing both to heat cycle independently * BP-28 brake pads with medium to high friction that increases with rotor temperature, providing a predictable, consistent pedal feel * Rotor wear clips and premium-grade hardware
Not Yet Reviewed
$1,630.75
The Right Stuff EZ Fit disc brake conversion kits are designed with originality in mind. They're offered for front and rear, in manual or power assist, and allow you to maintain your 14 in. wheels. Depending on application, the kits feature Timken bearings, bolt to stock spindles, have minimal offset for better fender well clearance, and fit factory rear-ends with staggered or non-staggered shocks. EZ Fit kits are available for a variety of specific vehicles, making it easy for you to upgrade to disc brakes.
( 1 )
$1,629.45
—
$1,803.15
BD Engine Brakes enable your diesel to navigate downhill grades and mountainous terrain easier and safer than the vehicle's conventional braking system. This will increase the life of the stock foundation brakes and prevent brake fade under severe-grade driving. The factory-approved backpressure provides the retarding horsepower to slow down the vehicle on even the steepest descents, or just for a highway off-ramp. The exhaust flow is not restricted when the stainless butterfly is open in the large 4 in. casting that bolts into the exhaust system. The kits come with a lighted toggle switch for mounting conveniently on the dash. The brake releases as soon as the throttle is applied or the switch is flipped off. As with other BD designs, the backpressure is self-regulating. Once the pressure reaches specification, the butterfly position changes to maintain the highest pressure possible. This variable orifice design offers far superior retarding performance throughout the engine rpm range, compared to a fixed orifice design that only offers peak retarding performance at peak rpm.
( 2 )
$1,674.95
Strange Engineering's stainless steel brake kits are designed for drag racing's most abusive applications, offering drag racers a safer and more efficient alternative to conventional carbon steel brakes. Strange's Dynamic Drive Mount (DDM) system secures the stainless rotor with an internal Spirolox--eliminating all thermally generated stress from rotor attachment points and further reducing rotating weight. The system also permits the hat and rotor to expand and contract independently, allowing for thermal expansion, which drastically reduces warping, coning, and cracking. Strange Evolution Dynamic Drive Mount brake kits feature Evolution S DDM stainless steel rotors machined from premium stainless billets, proprietary heat treated, and fully ground. The kits also contain Evolution 4 calipers, high performance metallic or semi-metallic brake pads, additional components, and hardware. Together they produce more efficient accelerating and stopping of your drag racing vehicle. Kits are available for front or rear. Choose those designed for your vehicle. Evolution S DDM rotors: * Mounts to billet aluminum DDM hat reducing rotating weight * Exhibits 48 percent greater yield strength at 1,000 degrees F compared to carbon steel, further maintaining rotor integrity * Highly resistant to heat and corrosion * Unique Aero Slot design reduces rotating weight and promotes even heat dissipation, compared to common round drilled holes * Scalloped design further reduces rotating weight 4-piston billet Evolution 4 calipers: * Computer finite element analysis (FEA) optimized and field-tested caliper -- Design improves piston retraction, pedal feel, and stiffness -- Results in improved pad wear and exemplary braking efficiency * High-retraction piston and O-ring design to eliminate drag during acceleration * Stainless steel pistons mitigate heat transfer to brake fluid * Reverse dish pressure vessel piston maximizes stiffness * All 1.750 in. pistons provide increased clamping force * Type II black anodized finish resists corrosion, heat, and brake fluid Aluminum caliper mounts: * Billet one piece design * Eliminates bolts, spacers, and nuts that require periodic maintenance Brake pads: * DTC-30 semi-metallic brake pads -- Available in rear or front kits -- Provides the best starting line cold holding power -- Recommended for vehicles going 150 mph or less in the 1/4 mile * DRM-35 metallic brake pad -- Available in rear kits only -- Provides high resistance to brake fade -- Recommended for vehicles going over 150 mph in the 1/4 mile -- Maintains decent starting line cold holding capabilities -- May leave pad residue on rotors when not using parachute -- While common, it's recommended to remove when installing new pads Housing end stud kits: * Rear kits * Provides additional components not supplied in most aftermarket kits Screw-in wheel studs: * Front kits * Tapered Allen 1/2 in.-20 x 2 1/2 in. Billet aluminum hubs: * Front kits * Strong lightweight material * Lightening holes for enhanced weight reduction * Billet hub caps with O-rings and Strange branding * Bearings, races, and seals
Not Yet Reviewed
$1,524.99
—
$1,593.99
Wilwood DynaPro Radial Big Brake front hub kits are specifically engineered for the 1964-67 Sunbeam Tiger. Maintaining full compatibility with the OE spindle, these Wilwood DynaPro Big Brake kits offer forged billet narrow 4-piston calipers, large diameter rotors, and forged aluminum 4-bolt hubs and hats for this specific group of rear-wheel drive sport compacts. With optional caliper finishes and rotor designs, these kits are the perfect complements to your wheel, tire, and suspension upgrades. Personalize the style and optimize the brake performance of your Tiger with Wilwood DynaPro Radial Big Brake front hub kits.
( 6 )
$1,545.49
—
$1,562.40
Radial mounting provides secure and accurate installation of Wilwood forged billet DynaPro 4-piston calipers with large diameter rotors for select front and all-wheel-drive sport compacts, such as late model Mazdas and Fiats. These Big Brake front kits are the perfect complement to wheel, tire, and suspension upgrades on daily drivers, competition vehicles, and custom styled show machines. Kits are engineered for each specific vehicle to maintain full compatibility with the OE master cylinder output and factory ABS functions. Optional caliper powdercoat finishes and rotor designs provide choices that enable the builder to personalize the style and optimize brake performance. Order the disc brake kit recommended for your vehicle. Additional details: * Proprietary Spec-37 iron material (rotors) * 11 in. diameter GT 36 slotted, directional vane rotors * Billet aluminum calipers * Lightweight aluminum hats * High temperature, fluid, and abrasion-resistant Type III anodized finish on Narrow DynaPro calipers * BP-10 or BP-40 (high-temperature) brake pads, depending on kit
Not Yet Reviewed
$1,685.43
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
