Availability
This course will teach you a step-by-step tuning process for Gen III/Gen IV GM vehicles with the following vehicle modifications: bolt-ons, heads/cam and forced induction. You can tune with confidence knowing that we have developed a safe, effective and repeatable process for you to follow. Topics include: * The basics of how to use the HP Tuners software * What tables need to be changed for your tuning needs * What the tables mean, how to understand them and how to adjust them properly for your vehicle modifications * The correct order of tuning, such as when to adjust fuel, spark, etc. * Separate guide for MAF and VE tuning (covers Virtual VE) * 4-speed Automatic Tuning Guide * Learn a safe and effective repeatable process that you can use over and over again for three different vehicle modification types: * Bolt-ons * Heads/Cam * Forced Induction
( 3 )
$499.99
These Summit Racing™ GM EFI tuning beginners guide DVDs have been created by world-famous engine calibration expert Greg Banish. He shows you step-by-step the correct way to properly tune your GM EFI-equipped vehicle. Greg Banish is the foremost expert on EFI tuning and calibration, having performed thousands of calibrations and also being a keynote speaker at the 2008 Advanced Engine Technology Conference. Topics covered in the DVDs include: * EFI tuning training * Fuel injector tables * Mass airflow sensor training * Volumetric efficiency tuning * Tips for using HP tuners and EFI live
( 12 )
$267.99
The Tuning School Standalone Tuning Using Holley Terminator X HP Tuners Course for GM LS and LT will help you take control of your build, while pushing your knowledge to the next level of performance! Learn how to properly install and set up your Terminator X and Max devices—as well as learning a safe and repeatable process for precision tuning. Additional notes: * Supported modifications for this course: heads/cam, bolt-ons, and forced induction setups * Supported Engines: LS1/LS6, LS2/LS3, LS 24X 4.8/5.3/6.0 Trucks, LS 58X 4.8/5.3/6.0 Trucks, and Gen V LT applications * Supported Transmissions: 4L60E and 4L80E (LS specific) and 4L60 and 4L80 (LT specific) Course Topics Cover the following: * Basic Setup—hardware * Sensors and Actuators * Software Setup and Operation * Datalogging Basics * Critical Parameters Setup * Tuning Topics (for N/A and Forced Induction combinations) * Fuel Injector Sizing * Engine Size * Idle/Part Throttle Tuning * Speedometer and Rear Gear Calibration * Engine Cooling Controls * Timing Table Updates * Fuel Table Updates * Airflow Table Updates * WOT Tuning * Drive-by-Wire Throttle Response * Working with the Learn Table * Target A/F Ratio * Transmission Tuning
Not Yet Reviewed
$499.00
This GM Tuning Using HP Advanced Printed Tuners course will teach you advanced tuning knowledge in a topical format for GM vehicles. Learn about such topics as you can tune with confidence knowing that The Tuning School have developed a safe, effective and repeatable process for you to follow. Topics covered: * Adaptive idle tuning * Idle and part throttle power tuning (economy and power) * Scaling the tune (MAF range extension) * Scaling the tune * 2 and 3 bar speed density tuning - GEN III * 2 and 3 bar speed density tuning - GEN IV * E85 Tuning * Flex fuel Tuning * Race fuel tuning * Water injection tuning * Dry and wet shot nitrous tuning * False knock detection process * Full color manual written in a topical format for safe and effective tuning
Not Yet Reviewed
$499.99
Tuning Coyotes can be challenging, with the complex HDFX system and Ti-VCT, but with the included bolt-on and forced induction processes every level of tuner can make confident changes and improvements. Follow this course to maximize power by tuning for aftermarket throttle bodies and camshaft timing adjustments through tuning the Ti-VCT system!
Not Yet Reviewed
$499.99
The Tuning School's Jeep Enthusiast Using HP Tuners Course will teach you a step-by-step process to tune your Jeep. Use the templates or make a custom tune for stock applications, lifted applications and more! You can tune with confidence using the safe, effective and repeatable process. The course includes: * 3 templates for street, aggressive off-road, and slow off-road * Step-by-step process to use templates * Laminated checklists * Fundamental tuning techniques for custom tunes * How to tune stock with bolt-ons * How to recalibrate speedometers for larger tires and gear changes * How to tune using HP Tuners
Not Yet Reviewed
$399.00
The Tuning School's "GM Transmission Complete Learning Course" is their most comprehensive learning system yet. It features the GM Transmission printed course using HP Tuners, along with the online learning companion. * ONLINE: The GM Online Companion Course is designed to provide a visualized learning experience for every student who is learning at home. In six comprehensive sessions, you're visually guided through the printed course materials as you learn a step-by-step tuning process for GM automatic transmissions. This companion course includes: -- 5 hours of lectures, quizzes, and practical self-assessments -- Certificate of Completion -- Multiple articles and external video content -- Access to The Tuning School's student-only Facebook page * IN PRINT: You're in control of your performance tuning process using HP Tuners! Looking for just a little more performance with smooth shifts? Want an everyday transmission tune that still rips when you want it to? Looking for maximum performance and super snappy and sharp shifts? Towing heavy loads? With a brand-new learning and tuning innovation, you get to pick your process (Mild, Moderate, Aggressive or Towing), which keeps you in the driver's seat during your learning journey. The course is divided up into separate processes for tuning each transmission, which includes Torque Management, Shift times, Shift firmness, shift points and feel. You're also guided through setting up the VCM scanner, so you can log the parameters needed to understand what's happening with the transmission, including line pressures, shift times and converter slip. Since the introduction of the original 6-Speed tuning course back in 2008, many customers have experienced the huge improvements in driveability, performance and longevity offered through retuning these transmissions. This is one of the best improvements you can make to any GM vehicle with an automatic.
Not Yet Reviewed
$318.00
Summit Racing™ Ford Advanced EFI Tuning DVDs teach you the basic essentials of proper air/fuel ratio control for almost any late model Ford gas engine! Calibrated Success with Greg Banish walks you through the fundamentals to get your Ford dialed in without compromise. These Advanced Tuning EFI DVDs guide you further for successful tuning of your electronic throttle control while retaining factory equipped safety checks plus, discussions on electronic returnless fuel pump controls and variable camshaft tuning. You'll watch and learn as Greg properly calibrates a supercharged Mustang GT and puts to rest common tuning myths. Get a handle on air flow numbers; take control of your ETC system, fuel system and camshaft; tune your Ford from start to finish like a pro with a pro using Summit Racing™ Ford Advanced EFI Tuning DVDs.
( 6 )
$267.99
Summit Racing™ GM Advanced EFI Tuning DVDs continue the Calibrated Success learning to defeat complex tuning issues! OEM engineer, Greg Banish, uses straight forward language and live examples to cover more advanced calibration topics. Properly dialing in large flow rate injectors, making big horsepower, and dealing with larger camshafts are just some of the challenges that will be covered. With these GM Advanced EFI Tuning DVDs you'll watch training examples for working with "Virtual VE" airflow models and electronic throttle control systems as well as the step-by-step process of tuning vehicles on a load-bearing dyno--all without sacrificing safety or functionality of your GM vehicle! Learn advanced techniques clearly demonstrated by a pro in the comfort of your own garage with Summit Racing™ GM Advanced EFI Tuning DVDs.
( 4 )
$267.99
Clearance
Bishko factory OEM part lists and illustrations contain many diagrams to illustrate every single part in your automobile. When you cannot figure out the name of that little part you broke these diagrams can be invaluable for classic vehicle restorers! The chassis section includes comprehensive part information about the engine, electrical system, exhaust, transmission, brakes, suspension and more. The body section covers all body panels, doors, all window glass, and body moldings. Bishko factory OEM part lists and illustrations can help you put your project back together and get it on the road.
( 7 )
$475.99
$257.99
—
$431.99
The automotive expertise of Calibrated Success is shared with you over six hours in these all-new Summit Racing™ Advanced EFI Tuning Series Blu-ray discs. No matter what type of vehicle you drive, the techniques and advice presented by renowned OEM calibration engineer Greg Banish will help you achieve top performance from a variety of engine components. Each how-to segment is filmed and mastered in high-definition, so you can clearly see the step-by-step tuning procedures—then apply them to your own electronic fuel injection system. The Blu-ray discs are divided into four easy-learning episodes: * Episode 1 covers Vehicle and Dyno Setup, with countless hints on how to prevent future headaches. * Episode 2 offers training in Fuel Systems and Injectors, including common setups, fuel chemistry, and SAE J1832 injector testing. * Episode 3 studies Air Flow Modeling, with MAF and speed density tuning options explained and demonstrated * Episode 4 explores Spark Advance—the ignition hardware and cylinder pressure effects of ignition timing, MBT, and hook testing
( 2 )
$431.99
The Tuning School offers a GM LT Engine Tuning Using HP Tuners course based on HP Tuners VCM Suite. This most recent GM GEN V course was developed for anyone who wants to learn from scratch! Features include: * The latest knowledge for tuning Virtual Torque, Direct Injection Timing, * Torque Management and much more! * Based on HP Tuners VCM Suite, this most recent GM GEN V course was developed for anyone who wants to learn from scratch! * Follow specific processes using our laminates to tune bolt-on, heads/cam and forced induction GEN V engines * Full 200+ page color course workbook with screenshots of what the parameters and tables are that you need to adjust, along with why and how to. * 1 year of support included!
Not Yet Reviewed
$499.99
If you've been having difficulty finding information for your classic or antique vehicle, Bishko factory OEM service manuals will help find the facts you need. These guidebooks cover a wide variety of vehicles ranging back to 1910 and provide clear and valuable data. For the correct specifications, procedures, and adjustments, you will want to have Bishko Factory OEM service manuals on hand.
( 69 )
$251.99
—
$480.99
Get ready to unleash the potential power of your CAN-AM SXS using HP Tuners VCM Suite and BRP Cable. This "CAN-AM Tuning Using HP Tuners Course" is sold as a book and online course in one package. You receive both! Learn how to navigate and use HP Tuners' VCM Suite software (with your MPVI2, MPVI2+ or MPVI3) to create and load custom tunes to fit your preferences. Take it further with performing your own R&D, using The Tuning School processes as your guideline. Supporting late model Commanders, Defenders, and Mavericks, you can learn how to tune for aftermarket injectors and upgraded thermostats. In addition, use the concepts covered for turbo applications to adjust for larger turbo setups, as well as alternative fuels. Build as many tunes as you need and gain confidence in troubleshooting issues while you're out on the trails. Or give your weekend fun a little power bump. This course was built for the shop and enthusiast in mind—offering both the freedom to create custom tunes, while also better understanding how tuning works overall.
Not Yet Reviewed
$499.00
Get ready to unleash the potential power of your CAN-AM SXS using Dynojet's Power Vision 3. This "CAN-AM Tuning Using Dynojet Powercore Course" sold as a book and online course in one package. You receive both! Learn how to navigate and use Dynojet's PowerCore software with your PV3 to create and load custom tunes to fit your preferences. Take it further with performing your own R&D, using The Tuning School processes as your guideline. Supporting late model Commanders, Defenders, and Mavericks, you can learn how to tune for aftermarket injectors and upgraded thermostats. In addition, use the concepts covered for turbo applications to adjust for larger turbo setups, as well as alternative fuels. Build as many tunes as you need and gain confidence in troubleshooting issues while you're out on the trails. Or give your weekend fun a little power bump. This course was built for the shop and enthusiast in mind--offering both the freedom to create custom tunes, while also better understanding how tuning works overall.
Not Yet Reviewed
$499.00
The Tuning School Ford Ecoboost Tuning Using HP Tuners is an entry level course and designed to acquaint you with the correct tables to make adjustments, increasing performance through boost pressure, torque management, fuel control and spark control.
Not Yet Reviewed
$499.00
On Sale
SCT Advantage III Dodge/Chrysler Pro Racer software lets you tune your ride just like the pros! Before, when you made modifications to your vehicle, you were off to the tuning shop to get the best performance possible. With Advantage III Pro Racer software, you have the same custom-tuning software that they do to custom-tune and tweak your vehicle's power and performance! The hardcore enthusiasts at SCT offer their field-tested and proven Dodge/Chysler software in an easy-to-use, Windows-based program with built-in help files to take you through the entire tuning process. Get the most out of your vehicle's PCM--take control and get an advantage with SCT Advantage III Pro Racer software. Package Contents: * Includes installation of SCT Advantage 3 software (Downlaod required) * USB security key * License agreement * SCT lanyard
( 1 )
$349.00
$314.10
The Tuning School's Dodge HEMI Tuning Using HP Tuners course will teach a safe, repeatable, process-based system for everything from the basics of tuning the stock car all the way through full bolt on's and mild boosted applications up to 7-8 PSI. Some of the included sections include: * How to change the injector size * How to modify the MDS (displacement on demand) * Updating the engine size for larger bore * How to fix idle stability and adjust startup parameters * Adjusting airflow limiters and torque management * Learn how to adjust fueling and spark advance and retard * Learn to modify variable cam angle tuning * Learn how to use the scanner for diagnostics and monitoring engine performance * Understanding the fuel to air ration system used by Dodge * Understanding how the ANN works autonomously to modify engine parameters and determining how to adjust it
Not Yet Reviewed
$499.99
On Sale
You've always wanted to tune your Mustang yourself; Advantage III Ford Pro Racer software from SCT Performance gives you the tools to custom-tune and tweak your Pony. Their software, which supports most Ford vehicles, is an easy-to-use, Windows-based program with built-in help files and all of the tuning controls and variables that professional tuners use. Pro Racer software unlocks your vehicle's PCM to tune parameters for optimal performance and drivability, whether you've added simple or high-horsepower modifications. Advantage III is field-tested and proven software that will guide you through the entire tuning process. You're in complete control of your vehicle's PCM for added power and performance with Advantage III Pro Racer software from SCT. Package Contents: * Includes installation of SCT Advantage 3 software (Download required) * USB security key * License agreement * SCT lanyard
( 12 )
$349.00
$314.10
On Sale
Give your ride a professional advantage without the price, with Advantage III General Motors Pro Racer software from SCT Performance. Whether you have a Camaro or Corvette, this software is designed for you GM owners who want to tackle tuning your ride yourself instead of heading to your local speed shop. The hardcore enthusiasts at SCT offer field-tested and proven Pro Racer software, affording you full control to custom-tune and tweak your own ride! The easy-to-use, Windows-based program with built-in help files guides you through the tuning process to get the most out of your vehicle's PCM for increased horsepower, torque, and throttle response. Take control to get the most from your high performance ride with SCT Advantage III Pro Racer software. Package Contents: * Includes installation of SCT Advantage 3 software (Download required) * USB security key * License agreement * SCT lanyard
Not Yet Reviewed
$349.00
$314.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
