Air/Fuel Delivery Parts for Carbureted & Fuel Injected Engines

Cram the right air/fuel ratio into your engine and you create incredible horsepower. Summit Racing has everything you need to find that mix, starting with carburetors...

Cram the right air/fuel ratio into your engine and you create incredible horsepower. Summit Racing has everything you need to find that mix, starting with carburetors for street to strip, plus intake manifolds ranging from stock-height replacements to hood-busting tunnel rams. If you’e ready to advance to fuel injection, we’ve got you covered with injectors, manifolds, fuel rails, sensors, and complete performance EFI conversion kits. We’ve also got cold air intakes, fuel pumps, fuel filters, superchargers, turbochargers, nitrous kits, methanol injection kits, hood scoops, and air filters—there’s no excuse for starving...

Showing In Stock Items. Show All 89 Items.

Not Showing Customizable Items. View Customizable Items.

Individual Parts

Part Groups

Results 1 - 24 of 74

BluePrint Engines Dual Plane Vortec Intake Manifolds

BluePrint Engines dual plane Vortec intake manifolds are perfect to top any SBC ranging from 350 to 400 c.i.d. These cast aluminum performance replacements are pressure-tested for leaks—and are capable of supporting over 500 hp. They're a great match for BluePrint H8002K and HP8103 headed engines, or iron Vortec headed engines. Gaskets and hardware are included. Additional details (P/N MLL-BPP350VINT): * Engine block style: SBC Stock/OEM standard deck * Cylinder head style: Vortec * Carburetor mounting: 4-barrel square bore * Intake style: Dual plane * Basic operating RPM range: Idle - 6,200 * Intake manifold height: 4.595 in. * Intake finish: Natural * Intake material: Aluminum * Features two 1/2 in. NPT plugs on top of the front water crossover, and one 3/8 in. NPT plug facing forward, perpendicular to the thermostat. * The rear most 1/2 in. NPT pipe plug on the rear intake runner is for brake booster. This is NOT a water port. * NOTES: This intake manifold features the Vortec (vertical intake bolt) Pattern. This is the production intake manifold used on BluePrint SBC engines 400 c.i.d. and smaller. May not be compatible with OEM chokes or OEM accessory mounting brackets.

4.75 out of 5 stars ( 4 )

$249.99

Edelbrock Performer Vortec Intake Manifolds

Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.

4.82 out of 5 stars ( 33 )

$339.95

—

$540.95

Edelbrock Performer RPM Vortec Intake Manifolds

Edelbrock Performer RPM Vortec intake manifolds are based on their highly successful Performer family. They're designed for street rods, marine applications, and a host of engine swaps using small block Chevy V8s with 1996 and later Vortec (L31) cast iron heads or Edelbrock's E-Tec aluminum heads. They accept single square bore carbs only and have an external water bypass boss machined into the front of the water crossover for use on 1996 and later Vortec production engines. Their 1,500 rpm to 5,500 rpm power band makes them an excellent choice for a wide range of setups.

4.76 out of 5 stars ( 21 )

$389.95

—

$617.95

Chevrolet Performance Vortec Intake Manifolds with TBI

These Vortec manifolds with TBI from Chevrolet Performance are designed for maximum horsepower with throttle body fuel injection and EGR usage. These manifolds will fit all Vortec-designed cylinder heads.

4.24 out of 5 stars ( 17 )

$694.28

On Sale

Professional Products Cyclone Vortec Intake Manifolds

These Cyclone intake manifolds from Professional Products are designed to fit engine swaps using the 1996 and later Vortec cast iron heads or the Edelbrock E-Tec aluminum heads. These manifolds can be used on any Chevy V8 engine utilizing the late Vortec head. They have a provision for an external water bypass. These Cyclone Vortec intake manifolds feature 4-corner water outlets, dual distributor hold-downs, a square bore carb adapter and gasket, and will work with late model style water neck, alternator, HEI, and air conditioning brackets.

3.53 out of 5 stars ( 19 )

$173.99

$156.59

Edelbrock Performer Vortec Intake Manifold and Carburetor Kits

These Edelbrock Performer Vortec intake manifold and carburetor kits are intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock's E-Tec aluminum heads. Performer Vortecs are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. The kits include a 650 cfm Thunder Series AVS carburetor with electric choke for easy drivability.

3.0 out of 5 stars ( 2 )

$993.95

Chevrolet Performance TPI Vortec Lower Intake Baseplates

Tuned Port Injected (TPI) engines with Vortec heads are a reality, thanks to the Chevrolet Performance team. Their engine dynometer tests have shown a 40 hp gain with the new Vortec TPI base plate and stock Vortec heads versus the stock L98 engine. The Vortec TPI base manifold was designed from the original GM TPI intake to be a universal fit for Chevrolet/Pontiac cars (1985-92) that were equipped with factory Tuned Port Fuel Injection—and the cylinder heads have been replaced with the new style raised-port improved flowing Vortec heads from Chevrolet Performance. * Performance gains: In-house testing has proven a gain of 40 hp over a stock L98 engine. The larger runners of the TPI Vortec baseplate, combined with the excellent flow characteristics of the GM Vortec heads, produced 300 hp on an otherwise stock L98 engine. Other modifications such as camshafts, rocker arms, and injectors produced as much as 375 hp with the stock computer and throttle body. Testing was performed with a mass airflow (MAF) sensor system. * Minor modifications required: TPI Vortec baseplates are a universal design that we patterned after the original GM TPI baseplate. Because it is a universal design, you should first test fit all components that bolt directly to the intake and make any required modification prior to final installation. Some modifications may be required of the external components related to the intake and EGR systems.

Not Yet Reviewed

$449.95

Chevrolet Performance Vortec Dual Plane Intake Manifolds

Chevrolet Performance Vortec dual plane intake manifolds are designed for maximum horsepower and a broad torque curve to give you great performance. These high-rise intakes fit all 283 to 400 c.i.d. small block Chevrolet engines using late model Vortec heads. The lightweight aluminum manifolds accept Holley square bore carburetors and include an externally plumbed hot water crossover passage.

4.6 out of 5 stars ( 5 )

$402.91

—

$672.73

Chevrolet Performance Vortec Low-Rise Intake Manifolds

These Vortec intake manifolds were designed for ultimate horsepower and torque when used with Vortec cylinder heads. These manifolds offer superior throttle response for street or racetrack use and will clear most stock hoods. Vortec aluminum manifolds will accept either Holley or Quadrajet carburetors and offer provisions for the EGR.

4.2 out of 5 stars ( 5 )

$525.18

Chevrolet Performance Vortec Intake Manifold Bolts

These Chevrolet Performance Vortec intake manifold bolts will secure your intake manifold properly to your Vortec cylinder heads. They have the factory thread sealer already on the threads, and use a standard hex head for easy installation and removal. Chevrolet Performance makes installing your Vortec manifold simple with the use of their direct-fit intake manifold bolts.

3.0 out of 5 stars ( 3 )

$6.99

Chevrolet Performance Eliminator Vortec Intake Manifolds

Single plane Chevrolet Performance Parts' Eliminator Vortec intake manifolds mount a single high-flow 4-barrel with a runner and plenum configuration, fine-tuned to produce maximum power and torque from Vortec heads. An open "air-gap" space under the runners is engineered to reduce heat transfer to the intake charge, which helps to further maximize power.

5.0 out of 5 stars ( 2 )

$531.96

Top Street Performance Vortec Intake Manifolds

Top Street Performance Vortec intake manifolds are dual plane, high performance units ideal for street performance applications with a design that improves throttle response, as well as power and torque over a wide rpm range--idle to 5,500. They are cast from lightweight aluminum and feature a low-profile for ideal hood clearance. The TSP Vortec manifolds have additional provisions, including dual distributor hold-downs, 4-corner water ports, and a choke block-off kit. They are set up for spread bore carbs and include an adapter plate and gasket for use with square bore types. Note: As Vortec blocks do not have a water bypass, the manifolds are equipped with a provision to connect to a stock water pump using a 5/8 in. heater hose.

1.0 out of 5 stars ( 1 )

$244.44

Edelbrock Pro-Flo 4 EFI Systems

Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.11 out of 5 stars ( 127 )

$2,500.95

On Sale

Summit Racing™ Cast Aluminum Intakes

Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.

3.69 out of 5 stars ( 52 )

$340.99

$180.99

—

$240.99

Clearance

Summit Racing™ Stage 1 Intake Manifolds

Our Summit Racing™ Stage 1 intake manifolds are the perfect performance upgrades for your engine. The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,000 rpm. These cast-aluminum manifolds are pressure-tested for leaks. Chevrolet manifolds will clear HEI ignition systems.

4.59 out of 5 stars ( 232 )

$212.99

—

$251.99

Edelbrock Performer RPM Air-Gap Intake Manifolds

Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.

4.6 out of 5 stars ( 450 )

$453.95

—

$680.95

Edelbrock E-Force Supercharger Kits

Edelbrock E-Force supercharger kits use a positive displacement supercharger that is capable of producing over 500 hp. These kits include the supercharger with Eaton internals, a manifold, drive pulleys, a belt, and all necessary items for installation. Edelbrock E-Force superchargers are designed to provide more horsepower per pound of boost than their competitors, from off-idle through the rest of the rpm range. Plus, their internal bypass valve practically eliminates parasitic loss, consuming less than 1/3 of one horsepower at 60 mph. NOTE: They are not compatible with HEI distributors.

4.11 out of 5 stars ( 9 )

$3,644.95

Summit Racing™ Braided Throttle Cables

Old cables can break, become slack, or stick. Sound familiar? Maybe it's time to replace your vehicle's worn cables with Summit Racing™ braided throttle cable kits. They include a braided stainless wire cable and jacket, along with correct fittings. The throttle cable comes in different lengths to suit your application needs. When you step on the gas pedal, get the acceleration you expect with a new throttle cable kit from Summit Racing™!

3.78 out of 5 stars ( 104 )

$44.99

—

$45.99

Edelbrock Performer Intake Manifolds

Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.

4.61 out of 5 stars ( 572 )

$423.95

Summit Racing™ Stage 3 Intake Manifolds

Summit Racing™ Stage 3 dual-plane intake manifolds are based on our Stage 2 intakes, with the same high-rise design, long separated runners, and 1,500-6,500 rpm powerband. For even more power, we added an open area under the plenum, which provides airflow to keep the fuel/air charge cooler. These intakes are the perfect compliment to your street and strip performance upgrades. The cast-aluminum intakes are CNC-machined for a precise fit, and have a square bore flange and natural finish. Chevrolet intakes will clear HEI ignition systems.

4.41 out of 5 stars ( 70 )

$279.99

Edelbrock Performer EPS Intake Manifolds

Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!

4.74 out of 5 stars ( 315 )

$359.95

—

$639.95

Edelbrock Intake Manifold Bolt Kits

Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.

4.09 out of 5 stars ( 229 )

$21.95

—

$43.95

ARP Chromoly Intake Manifold Bolt Kits

ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading. These bolts are available with either hex or 12-point heads, and washers are included.

4.67 out of 5 stars ( 403 )

$19.99

—

$23.99

Painless Performance Fuel Injection Harnesses

For maximum power with exceptional drivability, transplant the power of fuel injection into your vehicle with Painless Performance fuel injection harnesses. All kits include straightforward instructions and TXL high-temperature, color-coded, and labeled wire for ease of installation. All fuel injection harnesses are 100 percent quality-tested on OmniScanners to ensure the viability of the circuits. Harnesses for both GM and Ford applications are available and they use genuine original equipment connectors for trouble-free installation and operation.

4.48 out of 5 stars ( 95 )

$137.99

—

$1,299.99

Page 1 of 4
Next