Air & Fuel Delivery
Availability
Cram the right air/fuel ratio into your engine and you create incredible horsepower. Summit Racing has everything you need to find that mix, starting with carburetors...
Cram the right air/fuel ratio into your engine and you create incredible horsepower. Summit Racing has everything you need to find that mix, starting with carburetors for street to strip, plus intake manifolds ranging from stock-height replacements to hood-busting tunnel rams. If you’e ready to advance to fuel injection, we’ve got you covered with injectors, manifolds, fuel rails, sensors, and complete performance EFI conversion kits. We’ve also got cold air intakes, fuel pumps, fuel filters, superchargers, turbochargers, nitrous kits, methanol injection kits, hood scoops, and air filters—there’s no excuse for starving...
Cram the right air/fuel ratio into your engine and you create incredible horsepower. Summit Racing has everything you need to find that mix, starting with carburetors for street to strip, plus intake manifolds ranging from stock-height replacements to hood-busting tunnel rams. If you’e ready to advance to fuel injection, we’ve got you covered with injectors, manifolds, fuel rails, sensors, and complete performance EFI conversion kits. We’ve also got cold air intakes, fuel pumps, fuel filters, superchargers, turbochargers, nitrous kits, methanol injection kits, hood scoops, and air filters—there’s no excuse for starving that horsepower-hungry beast now!
Showing In Stock Items. Show All 9 Items.
Make sure your carburetor has the fuel it needs with these Edelbrock float kits. The kits include floats, pins, and a float setting gauge, making it easy to be sure your carb is never short of the fuel it needs.
( 47 )
$23.95
—
$39.95
These direct replacement floats are made from a high quality phenolic resin and will fit a variety of Edelbrock and GM carbs.
( 1 )
$39.95
—
$44.95
The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires
( 16 )
$827.95
—
$1,047.95
Get rid of those old fuel bowl floats—and upgrade to a Summit Racing™ carburetor float. They're manufactured from Nitrophyl or brass and include thread-in brass jet extensions (where noted). Available for side hung or center hung fuel bowls, Summit Racing™ floats will keep your fuel level where it's supposed to be. Order the model recommended for your carburetor application.
( 28 )
$11.99
Rebuilding your nostalgic 94 carburetor? Edelbrock 94 rebuild kits contain everything you need to do the job right. Kits include fuel inlet seat and needle, accelerator pump assembly and spring, accelerator check ball, check ball retainer, power valve assembly, float gauge and all the necessary gaskets. These rebuild kits will overhaul any Edelbrock 94 or Holley 94 2-barrel 3-bolt flange carburetor and have your hotrod running in no time. Do your rebuild right with Edelbrock 94 carburetor rebuild kits.
Not Yet Reviewed
$60.95
Edelbrock Pro-Flo Series air cleaners work with a variety of popular carburetors, including Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra Jet and Carter AFB, just to name a few. Knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapters (sold separately) are provided, depending on application. Pro-Flos offer multiple styles to match yours—and sizes for a proper fit. When you're looking for an ideal solution to your hood clearance problems, consider Edelbrock Pro-Flo Series air cleaners.
( 600 )
$46.95
AED carburetor kits include all of the necessary components to successfully rebuild and restore your Carter 9000 series and Edelbrock Performer series carburetors to their original condition. AED makes the rebuilding process easy and convenient by including all of the gaskets, needle and seats, clips and accessories, an accelerator pump, and instructions in one complete kit. Now you can buy one kit to service either of these fine carburetors. In many cases, float replacement is required to achieve maximum performance.
( 42 )
$64.99
The precise design of these Moroso carburetor wedge plates will provide you with a smooth transition of fuel from a dead start to the realm of gut-wrenching acceleration. Their precise angling ensures that the carburetor float bowls are kept level during acceleration to increase performance. These wedge plates incorporate a dual pattern to fit the standard Holley and CarterAFB/Edelbrock bolt patterns. They taper to .830 in. at their thickest point, which tilts the carburetor forward to the optimum 5 degree mark. Put Moroso carburetor wedge plates to the test--they're ready for it!
( 14 )
$54.93
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
