Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Fleece Performance Turbo Drain Tube Kits
Put the finishing touches on your truck with high-quality Fleece Performance turbo drain tube kits. The tubes are braided stainless steel for durability on the exterior, and reinforced with rubber tubing for flow and maximum flexibility. The kits contain everything you need to connect an S300/S400 turbo drain back to the factory drain location on the Cummins block when using a fixed vane geometry turbo. Kit contains: * Drain tube (20 in. end-to-end) * Cummins turbo drain tube adapter * Turbo drain flange adapter * Turbo drain gasket * 7/8 in.-14 to -10 AN fitting * Two 3/8in.-16 flange head bolts * Two 10mm x 1.5 flange head bolts
( 3 )
$99.95
Fleece Performance S400 Intercooler Adapters
When installing a Fleece Performance S400 turbo with intercooler, you're going to need the proper adapters. These 90-degree discharge adapters include a clamp and O-ring to ensure you get the proper seal. Don't lose out on performance!
( 1 )
$60.00
Fleece Performance Turbo Oil Feed Lines
Fleece Performance turbo oil feed lines ensure that your system gets an adequate oil supply. They offer replacements for your OE setup, as well as remote kits that prevent premature bearing failures. All include extra-flexible, smooth bore PTFE hose and high-quality fittings. The remote kits will also include a stock oil feed plug and an oil galley rifle fitting. Whether you're replacing or upgrading, Fleece Performance turbo oil feed lines are available for your application.
( 1 )
$69.99
—
$99.99
Fleece Performance PowerFlo CP3 Fuel Pump Kits
You demand more and Fleece Performance PowerFlo CP3 fuel pumps will supply more. How much more? Frankly, these upgraded pumps will support 750 RWHP with the proper complementing modifications. And, not only that, they will also eliminate the factory fuel flow restriction that begins at 3,000 rpm that usually costs you horsepower when you need it most. The law of supply and demand is simple and so is your choice for pumps that supply enough fuel to back 750 RWHP--Fleece PowerFlo CP3 pumps.
Not Yet Reviewed
$2,049.00
Fleece Performance Fuel Filter Delete Blocks
Upgrade your fuel system with these Fleece Performance fuel filter delete blocks. If you have an aftermarket fuel filtration system, such as an Air Dog or a FASS, your factory fuel filter is no longer necessary—is only becomes an extra restriction and an eyesore. These delete blocks will remove that restriction and help clean up under the hood of your truck. They mount perfectly to allow the factory fuel return lines to be used without any relocating or bending. The blocks also feature a port for the factory WIF (water in fuel) sensor and a 9/16-18 O-ring port for a dual CP3 return line.
( 2 )
$79.25
Fleece Performance Fuel Injection Wiring Harnesses
Fleece Performance fuel injection wiring harnesses are offered for many different applications. Produced in-house, Fleece's manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacements to get your truck or car back on the road quickly. Choose the wiring harness designed for your application.
( 2 )
$69.99
—
$72.13
Fleece Performance Fuel Primer Sealing Kits
If you're running an aftermarket positive displacement lift pump on your Duramax, a Fleece Performance fuel primer bulb sealing kit will allow you to eliminate the leak-prone primer bulb from your fuel system. The sealing cap includes a 1/8 in. NPT port to feed a low-pressure fuel gauge or cap it off with the included NPT plug. Note: Fleece kits include two screw options (standard 8-32 and metric M4). Thread in by hand each screw type and use the thread pitch with the best fitment. There is variation amongst the model years, so always test first by hand to verify the thread pitch on your vehicle.
( 1 )
$49.99
Fleece Performance Turbo Drain Adapters
Put the finishing touch on your truck by easily connecting the turbo to the factory drain location on your Cummins block with high quality Fleece Performance drain tube adapters.
( 3 )
$19.99
Fleece Performance CP3K Fuel Pump Kits
Fleece Performance CP3K fuel pump kits are a valuable lesson in supply and demand. Simply put; your diesel engine's demand for more fuel cannot be supplied by your stock CP3 pump, thus its' time for a new supplier--CP3K. These modified pumps are engineered to eliminate the factory fuel flow restriction that usually begins at 3,000 rpm. Your stock pump at this point starts losing fuel flow and rail pressure, which equates to loss of horsepower when you need it most. Reverse the trend; maintain the desired fuel rail pressure through your entire rpm range with cost-effective Fleece CP3K fuel pumps.
Not Yet Reviewed
$1,299.00
Fleece Performance Mechanical Fuel Pump Block-Off Plates
If you've upgraded from your factory mechanical lift pump to an electric pump, a Fleece Performance mechanical fuel pump block-off plate will eliminate the void left by your stock pump. These billet aluminum block-off plates come complete with the bolts, cover, and O-ring for easy installation.
Not Yet Reviewed
$34.99
Fleece Performance PowerFlo In-Tank Lift Pump Assemblies
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 8 )
$649.00
Fleece Performance Cheetah Holset Turbochargers
Fleece Performance Cheetah Holset turbochargers are 100 percent drop-in, bolt-on, and enjoy big top-end power units. These turbos provide quick and smooth throttle response, lower EGT's, and stock-like spooling with 40 to 45 psi operating range. They use a high-flow turbine wheel and Fleece's 63mm billet compressor wheel in order to support up to 650 rwhp. Give your diesel truck the kind of bolt-on performance most vehicles only dream of—with Fleece Performance Cheetah Holset turbochargers!
( 3 )
$1,899.00
Fleece Performance Auxiliary Heated Fuel Filter and Line Kits
Fleece Performance auxiliary heated fuel filter and line kits come with everything you need to properly route, plumb, and filter fuel for your diesel, including an integral high-flow fuel heating element and Water-In-Fuel (WIF) sensor. They will improve accessibility to the fuel filter, as well as reduce your ongoing maintenance cost with a lower cost Donaldson filter. Choose the kit designed for your Cummins engine. Kit includes: * Donaldson 3 micron fuel filter and water separator * Fuel filter base with integral heater and mounting hardware * Push Lock hose and all necessary AN and barb fittings * CP3 Feed fittings for 5.9L and 6.7L * Water-In-Fuel (WIF) sensor and adaptation harness
Not Yet Reviewed
$449.00
Fleece Performance Cheetah LB7 Turbochargers
Inspired by the fastest land animal, Fleece Performance Cheetah LB7 turbochargers can power your rig all the way up to 625 RWHP. These turbos will outrun the competition with custom 63mm compressor wheels, high-flow Inconel turbine wheels, and a 100 percent drop-in installation! Your diesel will feed on maximum airflow, more power, lower EGTs, and increased efficiency. If you're on the prowl for performance, let a Cheetah turbocharger from Fleece set the pace for your LB7 engine.
Not Yet Reviewed
$1,999.00
Fleece Performance Auxiliary Fuel Filter and Line Kits
Fleece Performance auxiliary fuel filter and line kits include everything you need to properly route, plumb, and filter fuel for your Cummins. They will improve accessibility to the fuel filter, as well as reduce your ongoing maintenance cost with a lower cost Donaldson filter. Choose the kit designed for your Cummins engine. Kit includes: * Donaldson 3 micron fuel filter and water separator * Filter base with integral mounting * Distribution filter block/filter coupler * Push Lock hose and all necessary AN and barb fittings * CP3 Feed fittings for 5.9L and 6.7L (not included in all kits)
Not Yet Reviewed
$349.00
Fleece Performance CP3 Adapters
Fleece Performance CP3 injection pump adapters are direct replacements for specified models and years. Each adapter is beautifully machined from billet aluminum and includes O-rings for the CP3 pump snout and adapter.
Not Yet Reviewed
$66.49
Fleece Performance CP3 Fuel Pumps
Fleece Performance offers Bosch CP3 fuel pumps for a wide range of vehicles—including many Chevrolet and GMC diesel trucks. These are drop-in replacements for your stock injection pump and each pump includes a new snout O-ring. There are many signs that a factory fuel pump is failing; and replacing the part is essential, as it conveys the required quantity of fuel from the tank to the engine at the necessary pressure. Order the CP3 fuel pump recommended for your application.
Not Yet Reviewed
$1,379.00
Fleece Performance Donaldson Fuel Filters
Fleece Performance Donaldson fuel filters are direct replacements for Fleece kits and assemblies. They are available individually or in cases of 12. Reduce your ongoing maintenance cost with a lower cost Donaldson filter. Choose the ones designed for your diesel.
Not Yet Reviewed
$279.99
