Availability
Magnuson supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. This technology recalibrates the engine and transmission control programs to work with the altered induction path and boost pressure of the supercharger. And that produces a seamless and consistent delivery of power over the entire rpm range--not just the high end! For you, that means Magnuson superchargers will boost your power output, and yet run like their factory installed units. Whether you're driving a Corvette or a Cadillac, a Silverado or a Hummer, or a Camaro or a Mustang, Magnuson supercharger kits deliver maximum performance!
( 12 )
$7,395.00
Summit Bucks
Edelbrock E-Force universal supercharger systems are designed for engine swaps into street rods and muscle cars. They feature 12 in. long runners for maximum low-end torque and great drivability. They're capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than an Edelbrock E-Force universal supercharger system—exactly what you need for your engine swap project. Order the model recommended for your year/make and engine application. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
Not Yet Reviewed
$8,164.95
—
$8,739.95
Vortech has a wide variety of supercharger kits available for many electronic fuel injected cars, trucks, and SUVs. Vortech kits come complete with everything that you need to install some serious horsepower. All systems come with the required fuel management components and a fuel pump, depending on the application. Also, all required hardware comes with the kits, including hoses, OEM connectors, ducts, fasteners, and tie wraps. Of course, the kits include complete instructions with plenty of diagrams, graphics, and photos to make your installation easy.
Not Yet Reviewed
$5,561.99
—
$7,282.99
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Their centrifugal supercharger kits feature lightweight aluminum impellers that are heat-treated and high-speed balanced to ensure smooth operation. An O-ring compressor housing seal and an innovative impeller seal improve sealing and reduce friction. Vortech has taken away the headaches of building a custom kit by engineering these kits to have a true OEM-quality fit and finish. Each kit is 100 percent complete, right down to the wire ties. Most kits include a matched compressor supercharger unit with SQ technology for "Super Quiet" operation. A high-flow air intake system with a reusable air filter, heat-resistant silicone hose couplings, and premium-grade flex hose is included as well. Additional features: * Flow-tested cast aluminum and/or urethane air discharge tubing * OEM-style, heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware * Choice of satin or polished finish * Step-by-step, fully illustrated installation manual
( 9 )
$5,828.99
—
$8,409.99
LS Classic Series '63 Chevy Fuelie intake manifold systems are designed to give your LS engine the look of GM's second generation mechanical fuel injection system found in 1963 to 1965 Corvettes while using modern technology for ultimate performance. These systems are based on a cast-aluminum, two-piece manifold, just like the originals. The intake kits include billet aluminum fuel rails, all mounting hardware, and gaskets. These systems require GM LS3 OEM fuel injectors and a GM four-bolt, 92mm, drive-by-wire throttle body. They are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series '63 Fuelie intake manifold systems are available for rectangular or cathedral-port LS cylinder heads. Order the intake manifold system suited to fit your application.
Not Yet Reviewed
$5,153.95
LS Classic Series '62 Chevy Fuelie intake manifold systems are designed to give your LS engine the look of GM's iconic Corvette "flat top" mechanical fuel injection system while using modern technology for ultimate performance. These systems are based on a cast-aluminum, two-piece manifold, just like the originals. These intake systems include billet aluminum fuel rails, all mounting hardware, and gaskets. These systems require GM LS3 OEM fuel injectors and a GM four-bolt, 92mm, drive-by-wire throttle body and are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series '62 Fuelie intake manifold systems are available for rectangular or cathedral-port LS cylinder heads. Order the intake manifold system suited to fit your application.
Not Yet Reviewed
$5,153.95
Vortech supercharger systems for GM LS-Swaps operate at an even higher level of sophistication than any original equipment system. They're currently one of the most popular engine swap power plants in the world. In every application, the LS systems have established themselves to be fantastic platforms to swap into just about anything. They operate at an even higher level of sophistication, with a boost curve generated by Vortech's superchargers that are ideally matched with today's highly evolved engines and give you power when you need it. The supercharger and the technologically advanced subsystems fully integrate into the vehicle's existing platform, yielding a smooth continuity of power and performance.
( 3 )
$5,910.99
—
$6,935.99
Vortech Centrifugal V-30 Series supercharger kits make it easy for small block Ford owners to create serious power with a bolt-on kit using new mounting brackets and cog drive components. These specifically-designed kits for modified engines with extreme boost demands combine advanced technology and race-proven performance. They're available for Ford 5.0L and 5.8L engines. Transform your small block Ford into an animal at the drag strip with the Vortech Engineering V-30 small block Ford mounting bracket and cog drive package designed for your engine application. Product features include: * Driver side mount * Dual 1/2 in. billet plate-mount configuration * Plate/idler spacers and all necessary hardware * Flanged 3.6 in. idler for use with up to 50mm wide belts * Belt length will vary depending on engine deck height and pulley ratio
Not Yet Reviewed
$10,307.99
—
$11,429.99
Mast Motorsports Mozez forward facing intake manifolds are available in standard and tall deck models, with a single fuel rail to fit eight injectors or a dual fuel rail to fit all 16 injectors. These redesigned, new generation Mozez intakes come with an optimized lower intake (casting) fully CNC-ported to match Mozez Gen 2 cylinder heads. The manifolds include a fully CNC'd billet lid, as well as a forward facing throttle body adapter. Get the looks and the go fast, too! Product features: * For standard or tall deck height LSX engine (your choice) * 125 mm Accufab throttle body mounting * Designed Boss to fit blower shop burst panel * Fits GM Gen III and GM Gen IV LS engines * Fits only with Mozez cylinder heads * For racing purposes only * Comes with fuel injector rails and brackets
Not Yet Reviewed
$5,100.00
—
$5,500.00
LS Classic Series '57 Chevy Fuelie intake manifold systems are designed to give your LS engine the look of GM's iconic original mechanical fuel injection system while using modern technology for ultimate performance. These systems are based on a cast-aluminum, two-piece manifold, just like the originals. These intake systems include billet aluminum fuel rails, all mounting hardware, and gaskets. These systems require GM LS3 OEM fuel injectors and a GM four-bolt, 92mm, drive-by-wire throttle body and are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series '57 Fuelie intake manifold systems are available for rectangular or cathedral-port LS cylinder heads. Order the intake manifold system suited to fit your application.
Not Yet Reviewed
$5,153.95
No oil lines! These Paxton NOVI SL supercharger kits feature a uniquely configured transmission housing that allows for effective gear lubrication and bearing temperature control. They also have a ventilated gear case to eliminate any potential internal pressure, an integrated gear case baffling system for proper oil control, and an integrated dipstick for simple fluid level checks. With no oil lines, the Paxton NOVI SL supercharger kits offer shorter installation time and the ability to service the supercharger oil without removal. Their special helical gear design with a 3.6:1 step-up ratio will provide excellent horsepower gains for your vehicle. The Paxton NOVI SL supercharger kits use a simple oil slinger design that does not require a separate shaft or bearing set and provides the proper fluid delivery to the gears and bearings. With the new design of these Paxton NOVI SL supercharger kits, it's easy to see why Paxton has been the heart of forced induction for more than four decades.
Not Yet Reviewed
$6,332.99
—
$6,625.99
Set your Viper apart from the rest with a NOVI-2000 Viper supercharger kit from Paxton. The heart of these kits is the legendary NOVI-2000 gear-driven centrifugal supercharger, which combines nearly silent operation with unmatched dependability. They feature an integrated air-to-water, dual-pass charge cooler, a stand-alone timing control computer, a high-flow race bypass valve for surge-free compressor operation, and heat-resistant silicon duct connecting sleeves with premium-quality stainless steel clamps. A complete fuel system upgrade includes dual high-flow fuel pumps, a fuel control unit, fuel lines, and a wiring harness for safe, reliable operation. The included oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger, even under sustained boost conditions. The supercharger drive systems include a tensioner and all of the necessary belts and pulleys, along with OEM-type cast aluminum mounting bracketry that securely mounts the units for a "factory-installed" appearance and rigid attachment. As if all of this isn't enough, the kits are compatible with factory OBD II engine management systems, are 50-state emissions legal, and include a reusable high-flow air filter. It's easy to see why Paxton has been a supercharging tradition for more than four decades.
Not Yet Reviewed
$12,335.99
—
$12,943.99
Vortech supercharger systems for 2000-04 Mustang can safely increase stock power to approximately 364 hp and 371 ft.-lbs. of torque. You will be impressed by the seamless integration of these supercharger systems and the true performance they deliver. These systems include the powerful V-2 SQ supercharger unit and are available in satin or polished finishes. With the V-2 SQ supercharger unit, you will enjoy near-silent operation and helical-cut gear profiles with SQ technology.
Not Yet Reviewed
$6,663.99
Summit Bucks
ProCharger P-1SC-1 supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. Their extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. These supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your application.
( 9 )
$7,074.00
—
$8,884.00
Summit Bucks
ProCharger P-1SC-1 Stage II supercharger systems deliver larger power gains, coolest charge air temperatures, and the greatest reliability. Thanks to many years of forced induction engineering and innovation, ProCharger technology offers extremely low charge air temperatures, that also provides much better engine longevity by protecting your motor from detonation. The P-1SC-1 Stage II supercharger systems are complete kits with their most-advanced, quiet, and self-lubricating superchargers, highly effective and larger air-to-air intercoolers, handheld programmer, and other components that create an attractive, OEM-quality installation. Cooler air makes more power, and ProCharger P-1SC-1 Stage II intercooled systems supply lots of it to increase horsepower and performance.
( 1 )
$6,949.00
FAST Cathedral Port Supercharger/Camshaft Power Packages for GM LS provide the perfect paring of products for enthusiasts looking for 850+ hp potential from their GM LS engine. They feature Edelbrock's 2300 TVS supercharger with integrated intercooler and COMP Cams' LST camshaft designed for supercharger applications. FAST Power Packages for GM LS have all the basics required to install the supercharger, but necessary accessory items such as fuel injectors, air intake, and heat exchanger pump are left up to the installer, providing total flexibility for custom installations. FAST Edelbrock/COMP Cams Power Packages for GM LS include: * 2300 TVS supercharger—integrated high-capacity, dual bar and plate intercooler enables major power gains through lower inlet air charge temperatures * Supercharger pulleys: -- 3.875 in. is pump gas-friendly supercharger pulley for engine break-in, initial tuning, and general performance driving -- 3.000 in. when maximum power is desired on race fuel or E85 * Accessory drive pulleys * Fuel lines and rails * Low Shock Technology camshaft * Pushrods * Dual valve springs * Tool steel retainers * Valve locks and seals * Spring seats * Installation hardware
Not Yet Reviewed
$7,954.95
Performance Design carbon XR intake manifolds feature cross-ram architecture constructed of carbon fiber and billet 6061-T6 aluminum for your LS3/LS7 application. They are built for torque with long runner lengths and plenums that employ a high-temperature, resin-infusion manufacturing process for consistent walls and a beautiful finish out of the mold with an internal core for rigidity. Their 5-axis CNC-machined head flange offers perfect port matching to the head entrance. The carbon fiber runners feature high-temperature, pre-impregnated manufacturing with braided stock resulting in no seams or ply drops throughout the part for ultimate strength. Build for performance without losing sight of aesthetics when you order the black or red Performance Design carbon XR intake manifolds best suited for your application. Other product features, items, and specifications include: * Runner length of 12.50 in. from bell mouth to head interface * Bell mouth entrance on each runner features a 2.75 in. effective diameter * Height – approximately 11.60 in. from block valley * Dual 90mm throttle with GM 4-bolt design (custom throttle plates can be used to fit different throttle bodies) * Plenum volume - 7.2L each (14.4L combined) * Accepts USCAR EV6-style fuel injectors (LS9/LSA injectors have targeted spray patterns and are not recommended) * Can be reversed on the engine * Works with moderate boost (rated up to 25 psi; custom builds for higher boost levels available as special orders) * Best suited for race cars, resto-mod, off-road race trucks, race boats, and hot rods (does not fit underhood on late model vehicles) * Throttle bodies can be rotated 180 degrees on LS7 versions * Single or dual IAC (LS1 style) can be mounted on either bank of LS7 versions * LS7 version accepts Gen 4 GM MAP sensor and features three 1/4 in.-NPT ports for PCV, charcoal canister, vacuum line, etc.
Not Yet Reviewed
$5,999.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
