Availability
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 55 )
$204.99
$109.99
—
$199.99
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 51 )
$340.99
$180.99
—
$275.99
Summit Racing™ LS fuel filters with built-in regulator make it easy when getting more fuel to your engine. They are Corvette- style, 58 psi-rated fuel filter/regulators with a 5 nominal micron rating. The bypass design allows you to run one inlet with one outlet to the engine and a return outlet back to the tank. Summit Racing™ universal LS fuel filter regulators are ideal when performing a LS engine swap or any other fuel injection swap.
( 46 )
$34.99
—
$64.99
Summit Racing™ mechanical fuel pumps are affordable replacements that deliver superior flow. They're available in two versions; one has 1/4 in. NPT inlets and outlets, provides 5.7 to 8 psi, and can free-flow 80 gph. That's twice what a normal pump delivers. The other has 3/8 in. NPT ports, delivers 6.5 to 8 psi, and can free-flow a hefty 110 gph. These pumps are offered in different finishes; and the lower housings of each unit can be rotated through 360 degrees for easy installation in tight spaces. Order the model recommended for your year/make and engine application.
( 515 )
$60.99
—
$111.99
Summit Racing™ billet throttle bodies are designed with larger openings (92mm or 102mm) to improve throttle response and provide maximum airflow. They're precision CNC-machined from billet aluminum and available in your choice of natural or black anodized finishes. Feed your LS engine the air it needs—and unleash its hidden horsepower! Order the Summit Racing™ replacement throttle body recommended for your vehicle.
( 26 )
$169.99
—
$180.99
When upgrading your LS-powered vehicle, don't forget to replace the factory steam tubes. Our Summit Racing™ Pro LS steam line plumbing kits eradicate trapped air and steam pockets from your engine to prevent hot spotting and overheating as well as provide more flexibility when using aftermarket intakes. Kits vent all 4-corners (except SUM-220952 and SUM-220952B kits) and contain black anodized billet aluminum fittings, steam port adapter, O-rings, stainless steel bolts, -3AN or -4AN hose and hose ends, (stainless steel hard lines and 5-port distribution block on SUM-220959 kit only) to make installation easy and more attractive than OEM lines, offering a cleaner look and better waterflow.
( 16 )
$74.99
—
$169.99
Our Summit Racing Max EFI LS intake manifolds feature a curved edge design with a large 9.7-liter plenum, for maximum flow and horsepower. They are available in both tall and low-profile, and satin or black anodized finishes. They include gaskets, mounting hardware, and a billet fuel rail kit.
( 9 )
$499.99
Summit Racing™ ignition coil wiring harnesses can facilitate a hassle-free connection of the coil to the wiring harness. That means no more cutting or splicing wires! These adapter harnesses are made from quality material for lasting durability—and they include all the necessary connectors to provide a fast, effortless installation. Order the model recommended for your application.
( 12 )
$137.99
Summit Racing™ fuel tanks are designed to meet or exceed the quality of factory fuel tanks. Whether you have a track car, classic car, or car you're restoring, Summit Racing™ has the high-quality fuel tanks you're looking for.
( 227 )
$127.99
—
$434.99
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$725.93
—
$909.93
Our lightweight Summit Racing™ fuel rail kits fit like stock, but deliver the increased fuel volume that your LS1 needs for maximum performance. The 3/4 in. i.d. rails are precision CNC-machined from high-strength aluminum with a great looking, black anodized finish. The kits include fittings with Viton® O-rings for a superior seal, mounting brackets, and stainless steel hardware.
( 37 )
$104.99
—
$114.99
Summit Racing™ Coolant Steam Port crossover kits deliver cool performance and looks. Featuring beautiful billet aluminum construction, our kits will bypass the hot engine coolant from your throttle body for better performance and vent the steam from the front of the cylinder heads to the radiator or balance the flow between the rear of heads to help reduce engine temperature. Keep your engine happy and running at an optimal level with Summit Racing™ Coolant Steam Port Crossover Kits.
( 13 )
$39.99
—
$48.99
Cover the hole left behind from your mechanical fuel pump with Summit Racing™ steel block-off plates. These chrome plates are not only functional, but also nice looking.
( 120 )
$9.99
Our Summit Racing™ Stage 1 intake manifolds are the perfect performance upgrades for your engine. The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,000 rpm. These cast-aluminum manifolds are pressure-tested for leaks. Chevrolet manifolds will clear HEI ignition systems.
( 230 )
$198.99
—
$251.99
On Sale
Summit Racing™ intake manifold and installation Pro Packs are now all in one part number. With Summit Racing™ intake manifold and installation Pro Packs, you can get your satin-finished, square-bore intake, plus all of the installation items that you need to finish the job, and save time and money! These Pro Packs also include Loctite black RTV sealant.
( 42 )
$342.95
—
$742.34
Old cables can break, become slack, or stick. Sound familiar? Maybe it's time to replace your vehicle's worn cables with Summit Racing™ braided throttle cable kits. They include a braided stainless wire cable and jacket, along with correct fittings. The throttle cable comes in different lengths to suit your application needs. When you step on the gas pedal, get the acceleration you expect with a new throttle cable kit from Summit Racing™!
( 101 )
$44.99
—
$45.99
Get more horsepower, better acceleration, and some extra cash in your pocket with a Summit Racing™ fuel injection performance kit. Most fuel injection performance kits feature a molded polyethylene intake tube that's designed to pull in more power-building cool air, and they come with a washable, reusable air filter that'll last the life of your vehicle. Best of all, Summit Racing™ fuel injection performance kits bolt on in place of your stock air box, so installation is easy.
( 51 )
$217.99
—
$299.99
Our Summit Racing™ Stage 2 cast aluminum, dual-plane intake manifolds have a high-rise design with long, separated runners to deliver power gains in the 1,500-6,500 rpm range. They're a great addition to performance heads! These non-EGR manifolds have a square bore flange and a natural finish. Chevrolet intakes will clear HEI ignition systems.
( 57 )
$243.99
—
$389.99
Replace your grungy hardware. Dress up your engine and keep it looking good with Summit Racing™ classy stainless steel intake manifold bolts. They're made from rugged Grade 8 stainless, which means that not only are they strong and durable, they're also corrosion-resistant. They're hex-head bolts for easy installation, and they fit most popular manifolds.
( 141 )
$10.99
—
$11.99
Summit Racing™ Turbocharger Hot Side combo kits provide premium components and accessories, carefully matched, to successfully reach your power and performance target. Each of our combos contain BTR multi-layer header gaskets, an ARP chromoly head bolt kit, and Precision Turbo and Engine turbocharger gaskets, along with a Summit Racing™ Pro LS turbo manifold and wastegate. Completing each combo will be one of our 2700 Series performance turbochargers or a VS Racing turbocharger. Choose the combo best suited to your power needs. Contents and features: * BTR LS multi-layer steel gasket * ARP chromoly head bolts--12-point, rated at 170,000 psi to handle severe conditions * Precision Turbo and Engine turbocharger gaskets—stainless steel, provides a positive leak-free seal in high-temperature situations * Summit Pro LS turbo manifold—universal, 304 cast stainless steel, T4 flange, designed to handle the heat and horsepower * Summit wastegate--stainless steel base and 6061 aluminum cap with black anodized finish * VS Racing turbochargers with T4 housing * Summit 2700 Series performance turbochargers--T4 turbine housings--true race turbos offering the latest in compressor aero technology with quick-spooling and free-flowing turbines specially designed, balanced, and precision assembled with 2618 billet forged compressor wheels for class leading racers.
( 2 )
$1,287.32
—
$2,428.31
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 29 )
$429.99
$249.99
—
$429.99
Generation III and IV small blocks are perhaps the most popular LSx engines for swapping--and the powerful GM V8s require equally effective fuel delivery. Summit Racing™ universal LS-style fuel systems incorporate both the fuel filter and regulator into one efficient, affordable unit. These 255 lph fuel pumps channel a precise 58 psi of juice to the "dead head" fuel rails inlet, returning any excess from the filter back to your tank. It's a system very similar to those used in factory LS performance cars, a simple fuel solution for car and truck owners who jettison their stock powerplant for a coveted LS. Summit Racing™ universal LS-style fuel systems also include 20 ft. of braided fuel line, as well as -6 AN inlet and outlet fittings in a black or blue anodized finish. (The kits are intended for use with a fuel cell or modified/aftermarket tank with AN outlets and returns.) Summit Racing™ also offers the filter and fittings in a smaller kit for those who don't need the entire system.
( 6 )
$312.37
—
$334.81
Summit Racing™ Max EFI LS 750 fuel injection systems are efficient, self-tuning kits for your LS engine. These multi-port systems combine an aluminum intake manifold available in two profiles and port sizes, transmission control, and either a 92 or 102mm billet aluminum throttle body. The systems are available in two finishes and are timing control and power added compatible. Fire up the performance of your LS engine with our Summit Racing™ Max EFI LS 750 fuel injection systems. Select the kit with the specs and finish desired for your LS-based engine. Features: * 4.4 in. color touch screen hand-held controller * Multi-port fuel rails * 55 lbs./hr. injectors * Plug-and-play wiring harness * Calibration module * Oxygen sensor * MAP sensor * Tall or short manifold profile * Cathedral or rectangle port * 92mm or 102mm diameter throttle body * Black or natural finish
Not Yet Reviewed
$1,999.99
Our Summit Racing™ LS CNC billet intake manifolds look great and are made to take whatever you can throw at them. They are capable of handling 2,000 horsepower and over 300 psi of boost! Their plenums and bolt-on runners are CNC machined billet aluminum and will not distort or warp under boost. These intakes can accept up to 102mm throttle bodies and include hardware, gaskets, and an -8 AN fuel rail kit.
Not Yet Reviewed
$2,399.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
