Availability
Stealth 340 pumps are high-output, in-tank, electric fuel pumps for fuel injected and carbureted applications. At a volume rate of 340 liters per hour. These universal pumps bolt into many existing hanger assemblies, and are a direct fit upgrade for many OE applications. These pump will support up to: * 1000 HP (carbureted/naturally aspirated) * 850HP (carbureted/forced induction) * 850HP (EFI/naturally aspirated) * 700HP (EFI/forced induction) * 700HP on E85 (carbureted/naturally aspirated) * 595HP on E85 (carbureted/forced induction) * 595HP on E85 (EFI/naturally aspirated) * 490HP on E85 (EFI/forced induction)
( 14 )
$133.16
Walbro electric in-tank fuel pumps are available in a variety of flow ratings, including pumps that flow significantly more fuel at higher pressure. The outside dimensions, however, of many pumps are compact enough to fit existing hanger assemblies, without modification. All pumping components have been validated to OEM specifications for use in E85/flex fuel applications. Most Walbro in-tank fuel pumps utilize a proven gerotor design. Some high-performance models, including those designed for engines with more than 750 hp, feature a dual-channel turbine design for maximum efficiency in high-pressure and high-temperature applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's higher than conventional pumps. Some pumps require modifications to system wiring, fuel lines, and the fuel module, and should be professionally installed. Installation kits including a fuel strainer, fuel hose, harness pigtail, clamps, and wire connectors are sold separately.
( 352 )
$114.99
These billet aluminum AEM Electronics fuel pressure regulators can support engines of up to 1,000 hp. Featuring replaceable discharge ports to match your fuel pump output, they're adjustable from 20 psi up to the maximum pump capacity rating. AEM Electronics billet adjustable fuel pressure regulators are available in a variety of colors for a variety of applications.
( 15 )
$166.95
—
$217.95
Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life
( 5 )
$546.00
On Sale
K&N's universal performance air filters are designed and manufactured for a wide variety of applications, including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and more. Many hundreds of models are are available, so regardless of the angle or offset diameter of your air intake, there is likely a K&N universal air filter for your equipment. All filters are constructed with ultra-strong, molded, pliable rubber flanges, which absorb vibration, allow for secure attachment, and can be stretched for up to 1/16 in. (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable. Order the style and size that best suits your needs.
( 308 )
$68.99
—
$89.99
$55.19
—
$79.99
Radium Engineering fuel pump hangers permit the use of one, two, or three aftermarket pumps in the stock MK4 Toyota Supra (JZA80) fuel tank. Features include: * Drop-in OEM replacement * 8 AN male pump outlet * 6 AN male return inlet * Fuel starvation protection * High current electrical hardware * Compatible with various pumps (Walbro, AEM, etc.) * Anodized aluminum construction To simplifying aftermarket -AN hose plumbing, the 10 AN ORB threaded feed port features a low-profile 8 AN male fitting, and the 8 AN ORB threaded return port features a low-profile 6 AN male fitting. To reconnect the OEM return and vent hoses, 8.5mm barb fittings are also included. No permanent modification to the OEM fuel tank access cover is required. The custom designed stainless electrical studs easily handle the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low-profile design keeps all wiring tucked nicely underneath the OEM fuel tank cover using the provided foam insulation. Nonconductive acorn nuts are provided to prevent any accidental short circuits. The high quality in-tank wiring is insulated with chemically resistant ETFE. Electrical hardware is included for the fuel pump(s), OEM level sender, and OEM temperature sensor. One issue with all Supra fuel pump hangers is the lack of fuel starvation protection. In these kits, the flow from the FPR return line powers a Radium jet pump. Using a venturi-effect, this "mechanical" pump draws fuel from outside the sub-tank and distributes it directly to the pump inlets.
( 1 )
$218.45
Space can be at a premium in some engine compartments. Nitrous Express Piranha nozzle nitrous systems are designed to deal with that problem and still give you big-time power increases. They're built around NX's compact, yet highly effective Piranha nozzles and can deliver from 100 to 250 extra horsepower for 4-cylinder engines (including the air-cooled Volkswagen). For sixes, the power jumps range from 150 to 375 horses, and V8s can get boosts of 200 to 550, or even 600 hp. The kits come with nozzles, delivery lines and fittings, jets, solenoids, wiring, switches, and mounting hardware.
( 1 )
$634.70
—
$1,401.89
Hybrid Racing offers K-Swap cold air intake systems for a variety of applications, including select Honda© and Acura© cars from 1992 and up. These replacements are true 3 in. intakes that do a better job of keeping your intake charge cool and your engine bay looking hot. The most obvious feature on these intakes is the 100 percent glass-reinforced silicone construction. By using silicone, Hybrid created an intake that actually insulates the air going into the engine. For K-Swaps, this is particularly important since most setups put the cold air intake directly behind the radiator. What many people don't consider is that since aluminum is such a fantastic thermal conductor (hence why it is used in radiators), an aluminum cold air intake will actually absorb heat given off by the radiator. This increases the intake air temperature while decreasing the motor's performance. The silicone counteracts this by acting as a thermal barrier (much like header wrap); this leads to lower intake air temps and a denser intake charge. Another benefit of the silicone construction is that there's no need for a coupler at the throttle body. The intake connects to the throttle body with just a single T-bolt clamp, meaning less turbulence as air enters the intake manifold. A less noticeable but very important feature of these intakes is that they work with RBC, RRC, and PRB intake manifolds. Most competing K-Swap intakes work with either the PRB intake manifold or the RBC/RRC intake manifolds, but not both. Hybrid took the extra time to create an intake that would work with all three! On top of that, the kits are designed to work with OEM K-Series throttle bodies AND big bore throttle bodies. The included T-bolt clamp is custom designed to fit both applications. And who can forget about looks! Everyone knows that with K-Swaps, making power and going fast is the name of the game, but looking good while you do it doesn't hurt either. That's why Hybrid Racing made this one of the cleanest looking intakes on the market. When installed, only the intake tube and a single T-bolt clamp are visible. The hanger that attaches to the chassis is neatly tucked into the driver's side fender for the cleanest install possible. Additional notes: * Full 3 in. inner diameter * Glass-reinforced silicone construction * Designed to keep intake air temps down * Includes velocity stack filter * Fits EG/DC/EK chassis only (Model HYB-HYBCAI0102)
Not Yet Reviewed
$195.69
Deter fuel theft and vandalism with some help from MotoRad Products. These MotoRad locking gas caps offer OEM-quality construction and materials and a famous maker lock cylinder with two keys. MotoRad locking gas caps are available in push-on, threaded, and quick-on styles, depending on your application.
( 7 )
$12.99
—
$15.99
AEM Electronics high-volume fuel rails feature a 1/2 in. fuel bore capable of flowing enough fuel to support most high-horsepower applications. Their large bore also dampens back pulses created by larger injectors and works perfectly with stock injector sizes. An additional port is included to accommodate a nitrous setup or fuel pressure gauge. Instructions, hardware, fittings, and injector O-rings are also included.
( 7 )
$162.95
—
$173.95
Skunk2 Racing Alpha throttle bodies are designed to be used with Skunk2 Pro Series intake manifolds, OEM, and other aftermarket intake manifolds for bolt-on horsepower and torque gains by maximizing engine airflow, all at a competitive price. A larger throttle body is key to producing additional power throughout the powerband. Sealed ball bearings, a precision-machined throttle plate, and a honed oversized bore ensure smooth operation on the most aggressive naturally aspirated and forced induction applications. Select the model recommended for your vehicle.
( 1 )
$138.65
MotoRad has you covered if you lose or damage your fuel cap. These OE replacement-type fuel caps are a direct fit for your application. They will ensure that you get a proper seal to prevent any fuel loss or evaporation.
( 16 )
$5.99
—
$8.99
DeatschWerks fuel pumps are manufactured for competition use, providing high-powered, in-tank fuel flow for your application. These high-quality fuel pumps feature a quiet, reliable turbine impeller—and are designed and tested for compatibility with gasoline and ethanol fuels. Each DeatschWerks fuel pump is also tested to be within specifications for flow, PRV activation, and amperage draw. DeatschWerks fuel pumps are offered in a variety of flow rates to meet your performance needs.
( 26 )
$109.00
—
$169.00
DC Sports cold air intake systems provide the best of both worlds: intake air heat reduction and improved breathability. Every kit includes an air filter that requires no oil, so there is no chance of oil getting into the intake track from excess oiling. Designed for maximum power gains, they increase horsepower and torque while improving throttle response. Features and benefits of DC Sports cold air intake systems include: * Washable and reusable air filter--no oil necessary * Filtration as small as one micron (0.00039 in.) * Aluminum alloy filter construction; practically immune to corrosion * Built-in velocity stack on most filters to increase air flow rates * Built-in funnel top directs air flow into the velocity stack * Stainless steel mesh for strength and filter longevity * Corrosion-resistant, aluminum alloy intake tube * Cuts OE intake system weight by up to half * Keeps the design intent of OE, but makes it more efficient. * Re-locates filter outside the engine compartment for cooler air * Lower intake air temperatures * Tuned inlet pipe for optimum performance gains * Most kits are bolt-on, direct-fit; minor modifications may be needed on certain kits * Comes in a multi-piece kit for ease of installation (where necessary)
( 21 )
$189.99
—
$237.49
Standard Motor Products fuel injectors help you attain maximum fuel efficiency and power from your engine. Properly operating injectors are essential components for enabling your vehicle to run flawlessly. These OEM stock replacements are available for hundreds of specific applications. Don't drive with faulty fuel delivery. Update worn or malfunctioning fuel injectors with reliable models from Standard Motor Products.
( 243 )
$90.99
—
$341.99
On Sale
Spectre Performance cold air intake kits provide better acceleration and fuel economy for your truck or SUV. They're designed to replace your factory air filter and air box assembly, eliminating the restriction as they smooth and straighten airflow. The high-flow design of these intakes enables your engine to breathe in a larger volume of air, resulting in more usable power throughout the engine's entire rpm range. Hundreds of models are available, with various tube and filter options. Choose the kit tailored for fitment and performance on your make/model application.
( 831 )
$64.99
These K&N inline performance fuel filters are designed for use in a variety of racing circuits, like NASCAR, drag racing, Sprint Car, marine applications, and all other types of custom racing. They will provide high flow rates, while protecting your engine from harmful contamination. The filters are compatible with methanol, are pressure rated up to 205 psi, and can achieve a high flow rate up to 18 gpm. The filter element is manufactured from stainless steel and features a black anodized aluminum housing with Viton® rubber seals.
( 35 )
$19.99
GMB electric in-tank fuel pumps are tested for function and performance. Built to OE specs under strict manufacturing guidelines, they work and look just like the factory sending unit. Malfunctioning fuel pumps deplete the effectiveness of your engine and your vehicle as a whole. GMB pumps are built to feed fuel from the tank and transfer a constant flow of fuel to the engine, while controlling pressure to prevent flooding. Order the replacement model designed for your year, make, and model application.
( 10 )
$45.99
—
$116.99
Agility Auto Parts offers a complete line of fuel module assemblies covering a wide variety of North American vehicle applications. Engineered and manufactured in a highly automated and dust-free environment, they meet or exceed all OEM specifications for fit, form, and function. Premium quality is ensured through stringent performance and reliability testing for pressure characteristics, flowrates, electrostatic discharge, and leaks. Agility Auto Parts fuel pump module assemblies include all the necessary components for a drop-in replacement right out of the box!
( 13 )
$120.99
Injector Dynamics ID2600x fuel injectors are developed specifically for use with liquid fuels, featuring corrosion-resistant internals, and long-term compatibility with ethanol and methanol. ID2600-XDS fuel injectors have the highest flow rate of any injectors offered by Bosch and flows 50 percent more than the ID1700x units. Injector Dynamics ID2600x fuel injectors feature Dual Slope Matching, a method of matching the flow rate in both the linear and nonlinear operating range, to provide better cylinder-to-cylinder consistency at low pulse widths.
Not Yet Reviewed
$1,449.00
Aeromotive billet regulators were specifically designed for Honda® and Acura® engines to provide fully adjustable base fuel pressure from 30-70 psi and a vacuum/boost reference of 1:1. They are direct bolt-ons for engines with the factory fuel rail or aftermarket fuel rails designed for the stock regulator. Order the model recommended for your specific vehicle.
( 1 )
$358.45
Carter OE replacement electric fuel pumps are manufactured in a plant that is TS16949 certified and provides the absolute latest in OE-quality certifications. This dedication to excellence, combined with in-depth OE experience, results in products that provide dependable performance that meet or exceed expectations. Carter OE replacement electric fuel pumps feature: * Factory-specified pressure and flow * OE-matched electrical connections * Accurate diameter and length * Original inlet and outlet positions * 100 percent factory-tested reliability * Roller vanes, which are more contaminant-tolerant than other designs * Carbide and brass bearings instead of plastic for longer life and smoother operation
( 178 )
$57.99
—
$63.99
These high performance fuel filters from AEM Electronics are capable of supporting power applications of up to 500 hp. They feature double O-ring seals for added leak protection and their 6061 aluminum bodies provide excellent durability. These application-specific filters fit in your stock location and are easily assembled and disassembled, thanks to their large, machined hexes on the top and bottom. They're also available in your choice of anodized colors to match your other accessories.
Not Yet Reviewed
$162.95
Skunk2 Racing Pro Series intake manifolds are street driven solutions for maximum horsepower and torque gains. With a specially tapered design, as well as a larger, tapered plenum, the Pro Series manifolds are designed for the "street enthusiast" who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Pro Series intake manifolds are shell-molded from 356-aluminum, CNC-machined for superior strength, a precise fit, and a high-quality finish, and vacuum-tested for quality. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out, and features a genuine Skunk2 nameplate. Choose the manifold designed for your vehicle.
( 1 )
$259.16
—
$301.80
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
