Availability
Edelbrock E-Force supercharger kits use a positive displacement supercharger that is capable of producing over 500 hp. These kits include the supercharger with Eaton internals, a manifold, drive pulleys, a belt, and all necessary items for installation. Edelbrock E-Force superchargers are designed to provide more horsepower per pound of boost than their competitors, from off-idle through the rest of the rpm range. Plus, their internal bypass valve practically eliminates parasitic loss, consuming less than 1/3 of one horsepower at 60 mph. NOTE: They are not compatible with HEI distributors.
( 8 )
$3,730.95
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Receive unprecedented value and add up to 75 percent more horsepower to your small block Chevy with these carbureted entry-level supercharger kits. These kits feature the Vortech PowerHat with diffusion technology and they will produce approximately 5 psi at 5,500 rpm on a mildly modified 350 engine. Additionally, most OEM Saginaw-type power steering pumps can be attached to the Vortech mounting bracket by using the supplied hardware in the kits. Smash that pedal and step into the world of superchargers! Vortech carbureted entry-level supercharger kits have you covered. Important information or requirements for the Vortech carbureted entry-level supercharger kits: * These systems were designed to fit on engines equipped with a "long" water pump and OEM V-belt drives or serpentine accessory drives; for correct belt alignment, the proper accessory drive crank pulley and accessory bracketry must be used * Earlier models equipped with short water pumps will require a long water pump to be installed * Quick Fuel, Demon, or Holley 4150-type, 4-barrel carburetor with mechanical secondaries designed for "blow-though" applications (may require rejetting or minor modification) * High performance, boost-referenced fuel pump * Compressor bypass valve * Accessory belts (will vary per application, depending on accessory configuration and supercharger pulley diameters) * Minor (bottom-side) modifications may be required, depending on the vehicle and type of intake manifold installed on the engine
( 5 )
$3,364.99
—
$5,410.99
Vortech crankshaft pulleys are made of 6061 T-6 aluminum that's hard anodized and built to SAE standards. They are CNC-machined for maximum surface contact and feature an improved belt traction profile.
( 11 )
$158.99
—
$558.99
Now you don't have to run a cumbersome roots-style supercharger on your vintage muscle. Vortech's carbureted centrifugal supercharger kits are designed to bring the performance and compact fit associated with late model fuel injected kits to vehicles equipped with carbureted engines. In most cases, these kits will fit under your stock hood without modifications. The heart of each kit is either a gear-driven V-1 S-Trim head unit or a gear-driven V-7 YSi-Trim head unit, unless otherwise noted. The cast aluminum carburetor enclosure assembly pressurizes the float bowls and throttle shafts for seamless response, and is designed for use with Holley 4150 or Demon 750 MD carburetors. The enclosure features front and rear -8 AN fuel inlet ports as well as provisions for pressure and vacuum connections. Linkage arms, a splined shaft, left/right hand spherical rod ends, and carburetor studs are included for simple throttle connection and adjustment. The included oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger. They also feature a 6061-T6 billet aluminum supercharger crank pulley, pulley spacer, and an automatic belt tensioner.
( 1 )
$4,319.99
—
$6,313.99
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Their centrifugal supercharger kits feature lightweight aluminum impellers that are heat-treated and high-speed balanced to ensure smooth operation. An O-ring compressor housing seal and an innovative impeller seal improve sealing and reduce friction. Vortech has taken away the headaches of building a custom kit by engineering these kits to have a true OEM-quality fit and finish. Each kit is 100 percent complete, right down to the wire ties. Most kits include a matched compressor supercharger unit with SQ technology for "Super Quiet" operation. A high-flow air intake system with a reusable air filter, heat-resistant silicone hose couplings, and premium-grade flex hose is included as well. Additional features: * Flow-tested cast aluminum and/or urethane air discharge tubing * OEM-style, heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware * Choice of satin or polished finish * Step-by-step, fully illustrated installation manual
( 9 )
$4,043.99
—
$4,722.99
Vortech offers these replacement supercharger mounting brackets to fit your specific application. They are manufactured from aluminum and include the necessary mounting hardware to complete the installation. Don't worry about cracked or warped brackets anymore--these Vortech replacement supercharger mounting brackets will keep your supercharger operating correctly.
( 7 )
$418.99
—
$567.99
Vortech pulley spacers are the prefect-fit for your supercharger system. They are crafted from aluminum and hardcoated black. Replace with what you know will fit and perform to expectations; choose Vortech pulley spacers from Vortech.
Not Yet Reviewed
$120.99
Paxton Superchargers offers a variety of parts and accessories for their carbureted systems, including these aluminum crankshaft pulley spacers. Order the size recommended for your vehicle application.
Not Yet Reviewed
$68.99
Get the most out of your supercharger with these drive pulleys from Paxton. Designed for use on vehicles with Paxton supercharger systems, these 6061 T-6 aluminum pulleys are built to SAE standards, CNC-machined, and anodized for durability. Paxton supercharger drive pulleys are available for a variety of supercharged applications.
( 2 )
$319.99
March Performance supercharger pulleys are designed to work with your supercharger and will give you better fuel mileage and increased accessory life. These pulleys will neither eat nor throw your belt and they can increase horsepower--just install them and go!
Not Yet Reviewed
$92.99
Vortech supercharger pulleys are made of 6061 T-6 aluminum, hard anodized, and built to SAE standards. They are CNC-machined for maximum surface contact and are available in several styles to suit your application needs.
( 42 )
$104.99
Vortech Centrifugal V-30 Series supercharger kits make it easy for small block Ford owners to create serious power with a bolt-on kit using new mounting brackets and cog drive components. These specifically-designed kits for modified engines with extreme boost demands combine advanced technology and race-proven performance. They're available for Ford 5.0L and 5.8L engines. Transform your small block Ford into an animal at the drag strip with the Vortech Engineering V-30 small block Ford mounting bracket and cog drive package designed for your engine application. Product features include: * Driver side mount * Dual 1/2 in. billet plate-mount configuration * Plate/idler spacers and all necessary hardware * Flanged 3.6 in. idler for use with up to 50mm wide belts * Belt length will vary depending on engine deck height and pulley ratio
Not Yet Reviewed
$10,307.99
—
$11,429.99
Vortech supercharger discharge tubes are designed to connect the supercharger head unit to the OEM throttle body. They are manufactured from high-quality aluminum and are available in satin or polished finishes. Complete the installation of your Vortech supercharger with Vortech discharge tubes.
( 4 )
$214.99
These nearly silent NOVI-1200 gear-driven supercharger kits come in models for V8-powered carbureted applications, or for today's sophisticated fuel injection. The kits have a cast-aluminum carburetor enclosure assembly that pressurizes the float bowls and throttle shafts for seamless response. The enclosure features a -8 AN fuel inlet port, plus locations for pressure/vacuum connections. Carburetor studs, linkage arms, a splined shaft, and right/left hand spherical rod ends are included for simple throttle connection and adjustment. They also include a 1/2 in. thick billet aluminum bracket, a cast aluminum discharge tube with a Bosch compressor bypass valve, and a fuel line fitting kit. Paxton's fuel-injected NOVI-1200 supercharger kits feature many of the same components as the carbureted kits, along with a number of EFI-specific parts, such as a handheld programmer, a molded inlet duct that retains the stock air box and MAF locations, an air/water charge cooler, and new cast aluminum discharge ducting. You also get a complete fuel system upgrade that includes replacement injectors, a fuel pump, lines, and a fuel management unit with a wire harness. All kits come with a supercharger oil feed and oil drain, required fasteners, and a detailed instruction manual for easy installation.
Not Yet Reviewed
$4,044.99
—
$5,636.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
