Availability
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 17 )
$2,349.95
—
$2,549.95
$2,113.95
—
$2,293.95
Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 125 )
$2,375.95
—
$2,534.95
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 9 )
$1,949.95
—
$2,149.95
$1,753.95
—
$1,933.95
Edelbrock Pro-Flo 4 XT EFI systems provide you with a high performance Pro-Flo XT-style intake and 90mm throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 XT EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled XT intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2.5-bar TMAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 21 )
$2,754.95
—
$2,888.95
CNC-machined from aluminum extrusions, these Edelbrock aluminum fuel rails have a flow-through design and fittings on both ends where applicable. Designed for Edelbrock EFI manifolds, they come with all necessary hardware.
( 61 )
$177.95
Wake up your old small block with a FiTech Ultra Ram EFI 600 hp kit! These self-tuning fuel injection systems for SBC engines are designed for anyone from the do-it-yourself hot rodder—to the professional EFI tuner. The Ultra Ram is ready to go with everything needed to convert your carbureted small block Chevy to top-of-the-line FiTech EFI self-learning technology. These kits are made to fit engines ranging from your crate stock rebuilt motor to your custom-built race SBC. Additional features: * Black anodized aluminum parts * High-flow throttle body * Programmable touch screen hand-held controller * Compatible with standard gas or E-85 fuel
( 1 )
$1,834.00
FiTech Easy Street 600 hp Total Package EFI swap kits make it easier for classic car owners to upgrade to EFI, enhancing reliability with a single part number. Each complete package features FiTech's proven Easy Street 600 hp throttle body as the heart of the system, delivering smooth and reliable performance. Along with each Easy Street is a new direct-fit EFI-ready fuel tank with a Go Fuel internal pump module, a high-pressure internal fuel pump, and a complete steel braided hose kit to get the fuel to the classic gold-finished throttle body. A high-flow serviceable filter and AN-style fittings are also included, making all the connections a breeze to install. Choose the FiTech Total Package designed for your vehicle.
Not Yet Reviewed
$1,956.99
FAST XFI fuel injector wiring harnesses allow you to incorporate non-OEM fuel injector plugs into your stock wiring harness. They're designed to be used with XFI ECU and XFI main harness's only. Available for different types and sizes of engines, they make the installation of a different style of injector no problem.
( 1 )
$163.95
—
$191.95
On Sale
Choose EFI main power wiring harnesses from Holley to meet your needs. Several choices are offered—TBI, LS applications, multi-point, and un-terminated harnesses—to feed and carry your engine's electrical supply. Get wired for electronic fuel injection with Holley EFI systems main wiring harnesses.
Not Yet Reviewed
$849.95
$763.95
FiTech offers Ultra Port EFI SBC systems for a wide range of Chevrolet engine applications from the 1950s, '60s, '70s, and '80s. These fuel injection systems are compatible with a variety of fuels, including gasoline, Flex, alcohol, and methanol. Depending on the model you select, the units are rated for 500, 750, or 1,000 hp with gas. Their cast aluminum throttle bodies come in a polished, black, or gold finish. Order the Ultra Port EFI small block Chevy system recommended for your vehicle.
Not Yet Reviewed
$2,342.00
—
$2,654.00
FiTech's Ultra Ram EFI 650 hp in-tank pump/regulator fuel injection master kits feature their outstanding Ultra Ram with aggressive looking sheet metal intake manifold along with an in-tank fuel delivery system. Also included in these packages is a Go Fuel Tight Fit regulator with gauge. Designed for the do-it-yourself hot rodder to the professional EFI tuner, these kits are ready to go with everything you need to convert your carbureted engine to top-of-the-line EFI FiTech self-learning technology. These Ultra Ram EFI systems will support up to 650 hp and come out of the box with the injectors and fuel rails installed. The robust ECU is easy to mount and handles the air/fuel mixture targets and you only need to input a few engine specs into the color touch screen monitor to get the engine to rev up. Ultra Ram is supplied with a sheet metal intake, cast aluminum 92mm throttle body, remote mount ECU, main harness, handheld controller, cable and windshield mount, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For fuel delivery, these FiTech Ultra Ram master kits include either a Go Fuel in-tank 255, 340, or 440 lph pump module. They can be used on tanks with a depth of 6 to 15 in. and feature a billet top assembly designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. A vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes a gauge.
Not Yet Reviewed
$2,106.99
—
$2,173.99
On Sale
Aeromotive billet fuel rails are built for maximum fuel flow and ease of installation. They deliver optimal injector supply with minimal hydraulic fluctuation and will feed up to 3,000 hungry horses. The fuel rails feature ORB-08 ports with compact connections and positive leak-free sealing. Full-size ports at the end of the rails insure proper fuel flow. Additional inlet and outlet ports are provided where required for plumbing convenience. Steel mounting brackets are custom engineered for each application, combining a solid durable mounting platform that ensures a correct fit. Aeromotive fuel rails are CNC-machined and include a great looking anodized finish. Order the kit recommended for your vehicle.
( 14 )
$380.35
$342.32
FiTech Go Port EFI complete fuel injection systems are offered in two kits, one for up to 550 hp and one for up to 1,050 hp. Each system is supplied with a new aluminum intake machined and fitted with injectors (36 or 80 lb.), fuel rails, wiring harness, and an 850 cfm throttle body. The ECU, with its high-speed processor, is integral to the throttle body along with the TPS, IAC, IAT and MAP sensors reducing wiring and making installation as easy as possible. All setup is handled through the color touch screen monitor with no tuning experience necessary to have your engine ¬rev up and running at its best. Choose the system designed for your engine.
( 3 )
$2,064.00
—
$2,295.00
Granatelli Motor Sports is proud to offer a variety of performance throttle bodies for late model, drive-by-wire engines. Their throttle bodies are precision-machined to exceed the demands required for increased airflow on high performance applications, both naturally aspirated and forced induction. These upgraded throttle bodies can be used with factory or aftermarket manifolds and utilize the OEM harness connector. The increased size also allows for smoother and quicker engine acceleration--and there's no need to transfer anything over from the factory unit. Proper tuning is highly recommended after installation. Granatelli throttle bodies are available for hundreds of vehicles from the 1990s and up.
( 10 )
$862.84
FiTech offers replacement fuel rails for a variety of applications, including EFI and LS fuel injection systems. Order the FiTech fuel rails that are best suited for your setup.
Not Yet Reviewed
$159.00
FAST XFI 2.0 multi-port complete fuel injection systems provide fully sequential EFI on everything from mild street rods to all-out race engines. They include carefully matched components, including the XFI 2.0 ECU, dual-sync distributor, a single plane aluminum intake manifold, 4-barrel throttle body, proper size Precision-Flow fuel injectors, aluminum fuel rails, fuel pump kit, all necessary sensors (including wide-band O2), professional quality wiring harnesses with labeled connectors. The ECU uses the latest in flash microprocessor technology to deliver a significant increase in processing speed--it can process, analyze, and adjust four times faster than previous EFI systems. In addition, a surface mount component circuit board and billet ECU enclosure give the XFI 2.0 superior durability. And to simplify installation, FAST offers engine-specific XFI 2.0 wiring harnesses featuring clearly labeled connections. The C-Com XFI Windows-based software is easy to navigate and incorporates several previously unavailable features, such as field flashable capabilities that enable you to download the latest software updates via email or directly from the FAST website. Stay current without ever removing the XFI 2.0 from your vehicle. The XFI 2.0 features Qwik Tune technology, which allows ECU programming without a laptop. Preprogram up to four different EFI MAPs, and select the tune-up you need with the flick of an in-car switch. Optimize one setting for everyday driving, others for racing conditions, and still another for improved fuel economy. Other perks include on-board diagnostics, EZ Test indicator lights, five bar MAP sensing, and controls for your power adder and torque converter. The XFI 2.0 also offers enhanced data logging capabilities and memory for analyzing up to eight additional monitored inputs.
Not Yet Reviewed
$4,811.95
FiTech's Ultra Ram EFI 650 hp in-tank pump/regulator/Go-Spark fuel injection master kits feature their outstanding Ultra Ram with aggressive looking sheet metal intake manifold along with an in-tank fuel delivery system. Also included in these packages is a Go Fuel Tight Fit regulator with gauge and a Go-Spark CD ignition for high-powered sparks that improve combustion and power output. Designed for the do-it-yourself hot rodder to the professional EFI tuner, these kits are ready to go with everything you need to convert your carbureted engine to top-of-the-line EFI FiTech self-learning technology. These Ultra Ram EFI systems will support up to 650 hp and come out of the box with the injectors and fuel rails installed. The robust ECU is easy to mount and handles the air/fuel mixture targets and you only need to input a few engine specs into the color touch screen monitor to get the engine to rev up. Ultra Ram is supplied with a sheet metal intake, cast aluminum 92mm throttle body, remote mount ECU, main harness, handheld controller, cable and windshield mount, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For fuel delivery, these FiTech Ultra Ram master kits include either a Go Fuel in-tank 255, 340, or 440 lph pump module. They can be used on tanks with a depth of 6 to 15 in. and feature a billet top assembly designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. A vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes a gauge. Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for 4-, 6- and 8-cylinder engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer.
Not Yet Reviewed
$2,317.99
—
$2,347.99
FiTech's Ultra Ram EFI 650 hp regulated in-tank pump/Go-Spark fuel injection master kits feature their outstanding Ultra Ram with aggressive looking sheet metal intake manifold along with an in-tank fuel delivery system. Also included in these packages is FiTech Go-Spark CD ignition for high-powered sparks that improve combustion and power output. Designed for the do-it-yourself hot rodder to the professional EFI tuner, these kits are ready to go with everything you need to convert your carbureted engine to top-of-the-line EFI FiTech self-learning technology. These Ultra Ram EFI systems will support up to 650 hp (naturally aspirated) and come out of the box with the injectors and fuel rails installed. The robust ECU is easy to mount and handles the air/fuel mixture targets and you only need to input a few engine specs into the color touch screen monitor to get the engine to rev up. Ultra Ram is supplied with a sheet metal intake, cast aluminum 92mm throttle body, remote mount ECU, main harness, handheld controller, cable and windshield mount, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For fuel delivery, FiTech Ultra Ram master kits include either a Go Fuel in-tank 255 or 340 lph pump assembly. Both offer a simplified approach to fuel delivery for fuel injected engines with a single line system, and have a depth of 6 1/2 to 15 in., making them suitable for most EFI-ready tanks. They have a -6 AN pressure port, a 4 bar (58 psi) regulator, and a low-profile design. Choose the kit with your preferred fuel delivery system. Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for 4-, 6- and 8-cylinder engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer.
Not Yet Reviewed
$2,235.99
—
$2,245.99
FiTech's Ultra Ram EFI 650 hp in-tank pump/Go-Spark fuel injection master kits feature their outstanding Ultra Ram with aggressive looking sheet metal intake manifold along with an in-tank fuel delivery system. Also included in these packages is FiTech Go-Spark CD ignition for high-powered sparks that improve combustion and power output. Designed for the do-it-yourself hot rodder to the professional EFI tuner, these kits are ready to go with everything you need to convert your carbureted engine to top-of-the-line EFI FiTech self-learning technology. These Ultra Ram EFI systems will support up to 650 hp and come out of the box with the injectors and fuel rails installed. The robust ECU is easy to mount and handles the air/fuel mixture targets and you only need to input a few engine specs into the color touch screen monitor to get the engine to rev up. Ultra Ram is supplied with a sheet metal intake, cast aluminum 92mm throttle body, remote mount ECU, main harness, handheld controller, cable and windshield mount, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For fuel delivery, FiTech Ultra Ram master kits include a Go Fuel in-tank fuel cell single pump module to solve high-pressure fuel needs. It has a billet top assembly machined with a 2 in. filler assembly, as well as an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the supplied hardware. Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for 4-, 6- and 8-cylinder engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer.
Not Yet Reviewed
$2,346.99
FiTech's Ultra Ram EFI 650 hp regulated in-tank pump fuel injection master kits feature their outstanding Ultra Ram with aggressive looking sheet metal intake manifold along with an in-tank fuel delivery system. Designed for the do-it-yourself hot rodder to the professional EFI tuner, these kits are ready to go with everything you need to convert your carbureted engine to top-of-the-line EFI FiTech self-learning technology. These Ultra Ram EFI systems will support up to 650 hp (naturally aspirated) and come out of the box with the injectors and fuel rails installed. The robust ECU is easy to mount and handles the air/fuel mixture targets and you only need to input a few engine specs into the color touch screen monitor to get the engine to rev up. Ultra Ram is supplied with a sheet metal intake, cast aluminum 92mm throttle body, remote mount ECU, main harness, handheld controller, cable and windshield mount, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For fuel delivery, FiTech Ultra Ram master kits include either a Go Fuel in-tank 255 or 340 lph pump assembly. Both offer a simplified approach to fuel delivery for fuel injected engines with a single line system, and have a depth of 6 1/2 to 15 in., making them suitable for most EFI-ready tanks. They have a -6 AN pressure port, a 4 bar (58 psi) regulator, and a low-profile design. Choose the kit with your preferred fuel delivery system.
Not Yet Reviewed
$2,024.99
—
$2,034.99
FiTech's Ultra Ram EFI 650 hp Force Fuel/Go-Spark fuel injection master kits feature their outstanding Ultra Ram with aggressive looking sheet metal intake manifold along with a Force Fuel delivery system. Also included in these packages is a Go-Spark CD ignition for high-powered sparks that improve combustion and power output. Designed for the do-it-yourself hot rodder to the professional EFI tuner, these kits are ready to go with everything you need to convert your carbureted engine to top-of-the-line EFI FiTech self-learning technology. The Ultra Ram EFI system will support up to 650 hp and comes out of the box with the injectors and fuel rails installed. The robust ECU is easy to mount and handles the air/fuel mixture targets and you only need to input a few engine specs into the color touch screen monitor to get the engine to rev up. Ultra Ram is supplied with a sheet metal intake, cast aluminum 92mm throttle body, remote mount ECU, main harness, handheld controller, cable and windshield mount, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For fuel delivery, these FiTech Ultra Ram master kits include either a 340 lph Force Fuel with a large 1/2 gallon reservoir or a compact 255 lph Mini Force system that fits easily under the hoods of street rods and smaller engine compartments. Both are equipped with an internal regulator that keeps the pressure at a consistent 58 psi, ideal for reliable EFI performance. They are supplied with high-pressure fuel hose, AN fittings, return line fitting bung, and liquid-filled gauge. The 340 lph also includes a 10-micron fuel filter. Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for 4-, 6- and 8-cylinder engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer.
Not Yet Reviewed
$2,346.99
—
$2,408.99
FiTech's Ultra Ram EFI 650 hp inline pump/regulator/Go-Spark fuel injection master kits feature their outstanding Ultra Ram with aggressive looking sheet metal intake manifold along with an inline pump kit fuel delivery system. Also included in these packages is a Go Fuel Tight Fit regulator with gauge and a Go-Spark CD ignition for high-powered sparks that improve combustion and power output. Designed for the do-it-yourself hot rodder to the professional EFI tuner, these kits are ready to go with everything you need to convert your carbureted engine to top-of-the-line EFI FiTech self-learning technology. The Ultra Ram EFI system will support up to 650 hp and comes out of the box with the injectors and fuel rails installed. The robust ECU is easy to mount and handles the air/fuel mixture targets and you only need to input a few engine specs into the color touch screen monitor to get the engine to rev up. Ultra Ram is supplied with a sheet metal intake, cast aluminum 92mm throttle body, remote mount ECU, main harness, handheld controller, cable and windshield mount, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For fuel delivery, these FiTech Ultra Ram master kits include an inline pump kit supplied with a heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 hp. The kit includes 40 ft. of high-pressure fuel hose, fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps. The Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes a gauge. Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for 4-, 6- and 8-cylinder engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer.
Not Yet Reviewed
$2,377.99
FiTech's Ultra Ram EFI 650 hp Force Fuel injection master kits feature their outstanding Ultra Ram with aggressive looking sheet metal intake manifold along with a Force Fuel delivery system. Designed for the do-it-yourself hot rodder to the professional EFI tuner, Ultra Ram kits are ready to go with everything you need to convert your carbureted engine to top-of-the-line EFI FiTech self-learning technology. The Ultra Ram EFI system will support up to 650 hp and comes out of the box with the injectors and fuel rails installed. The robust ECU is easy to mount and handles the air/fuel mixture targets and you only need to input a few engine specs into the color touch screen monitor to get the engine to rev up. Ultra Ram is supplied with a sheet metal intake, cast aluminum 92mm throttle body, remote mount ECU, main harness, handheld controller, cable and windshield mount, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For fuel delivery, these FiTech Ultra Ram master kits include either a 340 lph Force Fuel with a large 1/2 gallon reservoir or a compact 255 lph Mini Force system that fits easily under the hoods of street rods and smaller engine compartments. Both are equipped with an internal regulator that keeps the pressure at a consistent 58 psi, ideal for reliable EFI performance. They are supplied with high-pressure fuel hose, AN fittings, return line fitting bung, and liquid-filled gauge. The 340 lph also includes a 10-micron fuel filter. Choose your preferred system.
( 1 )
$2,197.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
