Availability
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 9 )
$1,949.95
—
$2,149.95
$1,753.95
—
$1,933.95
Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in your choice of natural or the popular EndraShine finish.
( 7 )
$1,865.95
On Sale
These Quick Fuel QFX-Series carburetors feature an all-new die-cast aluminum main body, which has a lengthened venturi section for greater midrange torque and better airflow. The annular booster venturis are precision die-cast with CNC-machined billet aluminum inserts, providing smoother and more refined air entry, a stronger vacuum signal, less turbulence, and improved fuel emulsion for better combustion. The Quick Fuel QFX-Series carburetors use red anodized billet aluminum CNC-machined metering blocks featuring 3-circuit metering (gasoline carburetors), changeable emulsion, idle feed, and intermediate bowl and feed discharge. Next, the die-cast aluminum fuel bowl combines high strength with significant weight reduction. They feature dual threaded fuel inlets and outlets and dual sight glass holes to easily set the float levels. The Quick Fuel QFX-Series carburetors feature Quick Fuel's external linkage with four different links to select the amount of primary throttle opening before the secondaries open: moderate progressive (25 percent), medium progressive (40 percent), full progressive (50 percent), and 1:1.
( 7 )
$2,099.95
$1,528.95
—
$1,888.95
Wake up your old small block with a FiTech Ultra Ram EFI 600 hp kit! These self-tuning fuel injection systems for SBC engines are designed for anyone from the do-it-yourself hot rodder—to the professional EFI tuner. The Ultra Ram is ready to go with everything needed to convert your carbureted small block Chevy to top-of-the-line FiTech EFI self-learning technology. These kits are made to fit engines ranging from your crate stock rebuilt motor to your custom-built race SBC. Additional features: * Black anodized aluminum parts * High-flow throttle body * Programmable touch screen hand-held controller * Compatible with standard gas or E-85 fuel
( 1 )
$1,834.00
FiTech Easy Street 600 hp Total Package EFI swap kits make it easier for classic car owners to upgrade to EFI, enhancing reliability with a single part number. Each complete package features FiTech's proven Easy Street 600 hp throttle body as the heart of the system, delivering smooth and reliable performance. Along with each Easy Street is a new direct-fit EFI-ready fuel tank with a Go Fuel internal pump module, a high-pressure internal fuel pump, and a complete steel braided hose kit to get the fuel to the classic gold-finished throttle body. A high-flow serviceable filter and AN-style fittings are also included, making all the connections a breeze to install. Choose the FiTech Total Package designed for your vehicle.
Not Yet Reviewed
$1,956.99
FiTech Go Port EFI complete fuel injection systems are offered in two kits, one for up to 550 hp and one for up to 1,050 hp. Each system is supplied with a new aluminum intake machined and fitted with injectors (36 or 80 lb.), fuel rails, wiring harness, and an 850 cfm throttle body. The ECU, with its high-speed processor, is integral to the throttle body along with the TPS, IAC, IAT and MAP sensors reducing wiring and making installation as easy as possible. All setup is handled through the color touch screen monitor with no tuning experience necessary to have your engine ¬rev up and running at its best. Choose the system designed for your engine.
( 3 )
$2,064.00
FiTech's Ultra Ram EFI 650 hp regulated in-tank pump fuel injection master kits feature their outstanding Ultra Ram with aggressive looking sheet metal intake manifold along with an in-tank fuel delivery system. Designed for the do-it-yourself hot rodder to the professional EFI tuner, these kits are ready to go with everything you need to convert your carbureted engine to top-of-the-line EFI FiTech self-learning technology. These Ultra Ram EFI systems will support up to 650 hp (naturally aspirated) and come out of the box with the injectors and fuel rails installed. The robust ECU is easy to mount and handles the air/fuel mixture targets and you only need to input a few engine specs into the color touch screen monitor to get the engine to rev up. Ultra Ram is supplied with a sheet metal intake, cast aluminum 92mm throttle body, remote mount ECU, main harness, handheld controller, cable and windshield mount, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For fuel delivery, FiTech Ultra Ram master kits include either a Go Fuel in-tank 255 or 340 lph pump assembly. Both offer a simplified approach to fuel delivery for fuel injected engines with a single line system, and have a depth of 6 1/2 to 15 in., making them suitable for most EFI-ready tanks. They have a -6 AN pressure port, a 4 bar (58 psi) regulator, and a low-profile design. Choose the kit with your preferred fuel delivery system.
Not Yet Reviewed
$2,024.99
—
$2,034.99
FiTech's Ultra Ram EFI 650 hp in-tank pump/regulator fuel injection master kits feature their outstanding Ultra Ram with aggressive looking sheet metal intake manifold along with an in-tank fuel delivery system. Also included in these packages is a Go Fuel Tight Fit regulator with gauge. Designed for the do-it-yourself hot rodder to the professional EFI tuner, these kits are ready to go with everything you need to convert your carbureted engine to top-of-the-line EFI FiTech self-learning technology. These Ultra Ram EFI systems will support up to 650 hp and come out of the box with the injectors and fuel rails installed. The robust ECU is easy to mount and handles the air/fuel mixture targets and you only need to input a few engine specs into the color touch screen monitor to get the engine to rev up. Ultra Ram is supplied with a sheet metal intake, cast aluminum 92mm throttle body, remote mount ECU, main harness, handheld controller, cable and windshield mount, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For fuel delivery, these FiTech Ultra Ram master kits include either a Go Fuel in-tank 255, 340, or 440 lph pump module. They can be used on tanks with a depth of 6 to 15 in. and feature a billet top assembly designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. A vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes a gauge.
Not Yet Reviewed
$2,106.99
—
$2,137.99
Rick's Hot Rod Shop fuel injected fuel tanks are TIG-welded and hand-formed from 304 Grade stainless steel. They feature an electric fuel pump installed and ready to run. The ACDelco fuel pump can support up to 450 hp and puts out 51 psi at 13.5 V. Built into a specially designed chamber, the fuel pump will not suffer from fuel starvation, as flow is provided through -6 AN supply and return ports. Rick's fuel injected gas tanks use a unique baffle system that is designed to control fuel tank slosh. These tanks feature mounting flanges manufactured from 3/8 in. thick, CNC-machined 304 stainless steel stock to ensure a proper seal. They include stainless steel mounting straps and hardware and will accept any aftermarket sending unit, sold separately. Make the switch to EFI--install one of these Rick's Hot Rod Shop fuel injected fuel tanks and your fuel system will have a rock-solid foundation.
Not Yet Reviewed
$1,999.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
