Availability
AEM Electronics water/methanol injection kits allow you to increase boost pressure and advance timing without having to run higher-octane fuel resulting in significant horsepower gains.
( 35 )
$499.95
—
$674.95
In gasoline engines, as with any intercooler, Stage-1 Boost Coolers suppress detonation, so more power-producing boost and timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. These systems contain everything needed to start making big hp! They're designed for use in gasoline (6-15 psig boost) supercharged/turbocharged vehicles. Systems include: * 300 psi high-volume pump * Adjustable boost pressure switch * 3 qt. reservoir * Two nozzles sized to your FWHP and boost levels * Bosch relay and all the electrical parts * Fittings, tubing, etc. for installation
( 16 )
$374.99
—
$726.57
Snow Performance Boost Cooler Stage-2.5 water/methanol injection systems suppress detonation so that more power-producing timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un-surpassed reliability and ease of install. They're designed for use in naturally aspirated carbureted gasoline vehicles.
( 8 )
$531.23
—
$937.51
Snow Performance stage 2.5 forced induction progressive water/methanol injection kits provide increased performance with or without nitrous. Water methanol injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing, which results in increased power and torque. When used with nitrous, the need for timing retard is greatly reduced or eliminated, and boosted applications especially benefit from reduced intake temperatures. The system includes everything needed for the installation. Order the model for your application.
( 2 )
$583.34
—
$937.51
Snow Performance VC-50 water/methanol injection controllers progressively command injection between two boost points--start and full. Adjustable between 1 to 50 psi, the controllers will begin injection at the starting point set and progressively increase injection volume with boost until it reaches the max injection point set. They come with heads-up boost gauge/water-methanol controller display. Manage the performance of your forced induction application with Snow Performance VC-50 water/methanol injection controllers.
( 2 )
$312.49
Snow Performance 300 UHO water methanol injection pumps offer unsurpassed pressure, technology, and reliability. All 300 Ultra-High Output psi pumps are individually tested to ensure quality and reliability. Features: * Dual EPDM seals offer greater psi ratings to be achieved--safer and longer * Proprietary internal wiring offers lower amperage draw than similar looking models * Built-in thermal breaker allows pump to run constantly without damaging pump internals
Not Yet Reviewed
$204.09
These AEM Electronics water/methanol controllers feature a variable-flow progressive design that allows the user to determine the amount of water/methanol mixture to feed into the inlet stream from the fluid reservoir. They are designed to control a high-pressure, recirculation-style pump to deliver the mixture.
( 8 )
$206.95
AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning.
( 11 )
$93.69
—
$108.95
AEM Electronics water-methanol injection solenoids eliminate any chance of water-methanol flow into the inlet when the WMI system is not engaged. This affordable water-methanol injection accessory features high-flow capability (3,600cc/min.)—and an impressively low current draw of only 0.75 amp that does not require the use of an additional relay. The valve body features include 1/8 NPT ports with included push-to-lock 1/4 in. hose fittings for easy connection, and EPDM seals that stand up to corrosion for years of reliable use. It's an inexpensive insurance policy to protect your high performance engine, regardless of the brand of water-methanol injection system you're using.
( 5 )
$124.95
Holley EFI water and methanol injection solenoids, when used with their other water/meth injection components take your forced induction ride to the next level. Integrated into the Holley HP and Dominator EFI Systems is the capability to control water/methanol injection, allowing you to safely run on lower octane pump gas! These solenoids are run by an injector driver output and are compatible with a water/methanol mix of up to 50 percent methanol.
Not Yet Reviewed
$449.95
These Snow Performance water injection nozzles feature a unique design that provides the best possible atomization. They have integrated 100-micron filters, so they will keep larger particles out of the system. Available in a variety of flow rates, these Snow Performance water injection nozzles can support a wide range of engines from 150-1,500 hp.
( 10 )
$31.23
These Snow Performance replacement water injection pumps are designed to keep your water injection system operating safely and efficiently. Whether you're replacing a pump or you need to upgrade to a bigger one, the Snow Performance replacement water injection pumps provide reliable delivery for your water injection system.
( 4 )
$204.09
In gasoline engines, as with any intercooler, Snow Performance Boost Cooler Stage-2 water/methanol injection systems suppress detonation so that more power-producing timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. These systems contain everything needed to start making big horsepower! They're designed for use in naturally aspirated carbureted gasoline vehicles.
( 9 )
$520.83
—
$937.51
Snow Performance VC-30 progressive controllers proportionally inject more or less water/methanol according to boost pressure. Doing this gives an accurate delivery allowing cooling and performance improvements over a wide range for improved drivability and cooling benefits. The VC-30 controllers include a digital display and manifold absolute pressure sensor, and the start and full points are adjustable for engagement and the delivery curve to match what your engine requires. Snow Performance VC-30 progressive controllers are especially helpful for direct-injected engines to remove 100 percent of carbon build-up on the valves, and is recommend for all street/strip driven gas forced induction vehicles using a turbo or centrifugal supercharger looking for cooling over a wide range.
( 3 )
$184.31
Snow Performance Boost Cooler MPG-MAX diesel water/methanol injection systems feature special mapping and the most sophisticated 2-D digital controller available for 1 to 3 mpg increases. They use a new injection management controller that allows for a small, steady spray of water/methanol to be injected across the entire power curve. By improving combustion efficiency, they provide more power and use less diesel fuel. They also now feature a brighter LCD screen that displays boost, EGTs, and injection pump output. The Snow Performance Boost Cooler MPG-MAX diesel water/methanol injection systems include flow-control solenoids, a 300 psi pump, high-pressure tubing, a wiring harness, wire looms, and a optional large 7-gallon reservoir in some kits. Available for Dodge, Ford, or GM, the Snow Performance Boost Cooler MPG-MAX diesel water/methanol injection systems are proven to increase fuel economy, lower exhaust gas temperatures, and increase horsepower.
( 4 )
$1,041.68
AEM water/methanol injection pumps help to increase the power of your engine. These recirculation-style pumps make great replacements for most water/methanol kits. Or, use them when creating your own special setup. AEM upgrades their pumps to ensure consistent fluid delivery for optimum performance with no erratic on/off pulsing, unlike older switched-styles. Their water/methanol injection pumps are designed with Santoprene diaphragms and EPDM seals to withstand the harshest of alcohol mixes. For better performance, consider an AEM water/methanol injection pump.
( 11 )
$199.95
—
$217.95
These reservoirs from Snow Performance are perfect for trunk or remote mounting. They come with rubber insulators, quick connect fittings, and extra tubing. They're a must for road racing applications or where high duty cycle/horsepower mandates higher volume on board.
( 4 )
$58.13
—
$312.50
Snow Performance electronic solenoids are designed for use with the Snow carburetor plate nozzle adapter. They include a wiring harness, a plastic solenoid with 1/8 in. NPT female threaded attachments, and necessary fittings. The solenoids should be mounted after the throttle plate to keep from siphoning at idle, or if the nozzle must be mounted lower than the reservoir to keep from gravity feeding.
( 11 )
$73.00
Snow Performance nozzle holder elbows give you the option to mount your water/methanol nozzles at a 90 degree angle. These fittings are ideal if you're adding nozzles to your current system or just rerouting what you have. For water/methanol injection system replacement parts, Snow Performance will keep you connected.
Not Yet Reviewed
$8.65
Snow Performance dual nozzle upgrade kits allow you to add an additional nozzle to be mounted in any Snow Performance Boost Cooler kit. They include a tee splitter, a junction piece with quick-connect fittings, a nozzle holder, and a section of hose. The Snow Performance dual nozzle upgrade kits are perfect for applications that need more flow than one nozzle can provide, or to get even distribution for a dual plenum/throttle body/carburetor setup.
( 9 )
$41.66
—
$312.50
AEM Electronics offers a cleaner flow of water/methanol for your engine with their injection filters. Their filters not only protect the internals of your engine, but the working components of the water/methanol pump as well! Your AEM injection kit is a great, low-cost way to increase the power of your gas or diesel engine, and using their water/methanol injection filters will help to increase pump life. Built from rugged polypropylene, these filters are easy to install, completely serviceable, and fit most systems on the market today. The stainless steel mesh strainer filters foreign particles as small as 40 microns without significant reduced flow. Feed your engine clean fuel with AEM Electronics water/methanol injection filters.
( 7 )
$49.95
Snow Performance water methanol filters are designed to be placed on the inlet or vacuum side of the pump. The 100 micron replacement models help prevent debris from entering the pump without restricting the flow of methanol.
( 1 )
$61.84
Snow Performance Stage-3 diesel water/methanol controllers utilize boost/EGTs to command injection, then create a 2D MAP to calculate load of the engine and inject precise amounts of water-methanol exactly when your vehicle needs it. Taking it a step further, the MPG-MAX commands two nozzles independently of one another to ensure exact amounts of water-methanol is injected at all engine load states of your vehicle. This delivers proven 1 to 3 mpg increases, as well as 70+hp and a 100 to 300-degree drop in EGTs. If you are looking for the most sophisticated water-meth controller on the market, you will find it in the Snow Performance MPG-MAX.
( 1 )
$416.66
AEM Electronics water/methanol injection system reservoirs are an important component to reduce engine knock and improve horsepower. They feature an integral fluid level sensor, so you never have to worry about running out when the boost is needed. Whether you want to upgrade the amount of fluid held in reserve, or just want to have a replacement on hand, AEM Electronics has you covered. These plastic reservoirs are available in multiple sizes.
( 3 )
$160.95
—
$217.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
