Availability
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because of their relationship to engine speed, superchargers commonly provide a power curve that increases with engine rpm, delivering boost with rapid response.
There are two main styles of superchargers: Roots and centrifugal. Roots-style superchargers use a pair of rotors within a housing to force air at higher than atmospheric pressure into your engines. The rotors can have a varying number of lobes and may be twisted, affecting how the air flows through the supercharger. Centrifugal style superchargers utilize a gearbox to spin a shaft, which is connected to compressor wheel, drawing in ambient air and compressing it on its way to the engine.
Turbochargers utilize the exhaust gases produced by your engine to spin a turbine wheel located inside the turbocharger housing, which is connected to a compressor wheel by a shaft. As the two wheels turn, ambient air is sucked into the turbocharger’s compressor inlet and pushed into the engine. That air charge is often passed through an intercooler to increase its density.
Choosing the right turbocharger kit for your vehicle can be daunting, with factors like tubing size, A/R ratio, and multiple other factors to consider. However, Summit Racing makes it easy by offering turbocharger kits custom-designed for a wide range of vehicles, so you can get all the benefits without major engineering work.
For even more helpful information about the difference between superchargers and turbochargers, check out this helpful article at OnAllCylinders.com.
Summit Racing has everything you need to take your engine’s performance to the next level with a complete supercharger or turbocharger kit. If you’re looking for a complete, pre-designed, bolt-on solution, we’ve got you covered. But if you want to take the plunge into every aspect of blow off valves, wastegates, piping, intercoolers, boost controllers, and more, we can help you there, too. Summit Racing only carries quality parts from trusted brands like Precision, Garrett, Turbosmart, Turbonetics, Edelbrock, Magnuson, ProCharger, and more, so you can complete your supercharger or turbocharger build with confidence.
Summit Racing™ mechanical wastegates are constructed of cast stainless steel and 6061 aluminum with a black anodized finish. These valves control the flow of exhaust gases to the turbine wheel in a turbocharged engine system. Their primary function is to regulate the maximum boost pressure in turbocharger systems, to protect the engine and the turbocharger. Order the relief diameter preferred for your application.
( 28 )
$100.99
—
$179.99
Summit Racing™ 50MM blow-off valves are a pressure release system that takes the load off your turbocharger when the throttle is suddenly closed, preventing damage to both the turbo and your engine. These valves are adjustable from 0 to 50 psi, making them ideal for most boosted applications. Machined from aluminum and black anodized for durability, these blow-off valves offer a quality look for any turbo setup. They include vacuum fittings, aluminum weld flange, V-band assembly, and springs.
( 13 )
$69.99
—
$245.99
Ford Performance Parts is pleased to introduce supercharger kits for the 2024 5.0L Mustang GT and Dark Horse. Developed by Whipple Superchargers in partnership with Ford Performance Engineering, these kits are a performance powerhouse. The package delivers 810 hp at 7,500 rpm and 615 lbs.-ft. of torque at 4,800 rpm for active exhaust equipped Mustangs. (10 hp less for non-active exhaust). The Ford Performance kit includes: * Gen 6 3.0L Whipple supercharger * Whipple exclusive inverted twin screw design * Patented dual pass intercooler * M-9926-M5292 92mm throttle body * M-12405-M50A colder spark plugs * GT500 port fuel injectors * Ford Performance exclusive calibration * Tomahawk calibration delivery tool * PREMIUM FUEL REQUIRED [91+ octane] * Engineered and tested to Ford Motor Company's rigorous standards * Ford Performance EXCLUSIVE 3-year/36,000-mile warranty when installed by a Ford dealer or ASE certified technician and registered through the Ford Performance Parts Tech-line. For registration assistance, please call (800) 367-3788.
Not Yet Reviewed
$9,852.99
Amplify your driving experience with a Fleece Performance Cheetah turbocharger. Featuring a Fleece exclusive 63mm FMW compressor wheel and a high-flow turbine wheel, these turbos are capable of supporting up to 650 rear wheel horsepower without sacrificing any drivability. These drop-in replacements offer smooth and quick throttle response with big top-end power. Whether you're towing, racing, sled pulling, or just driving to work, the Cheetah will get the job done. Order the model recommended for your truck.
( 2 )
$2,699.00
—
$3,099.00
Magnuson supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. This technology recalibrates the engine and transmission control programs to work with the altered induction path and boost pressure of the supercharger. And that produces a seamless and consistent delivery of power over the entire rpm range--not just the high end! For you, that means Magnuson superchargers will boost your power output, and yet run like their factory installed units. Whether you're driving a Corvette or a Cadillac, a Silverado or a Hummer, or a Camaro or a Mustang, Magnuson supercharger kits deliver maximum performance!
( 12 )
$4,195.00
—
$9,495.00
Vortech supercharger systems for GM LS-Swaps operate at an even higher level of sophistication than any original equipment system. They're currently one of the most popular engine swap power plants in the world. In every application, the LS systems have established themselves to be fantastic platforms to swap into just about anything. They operate at an even higher level of sophistication, with a boost curve generated by Vortech's superchargers that are ideally matched with today's highly evolved engines and give you power when you need it. The supercharger and the technologically advanced subsystems fully integrate into the vehicle's existing platform, yielding a smooth continuity of power and performance.
( 3 )
$3,915.99
—
$6,935.99
These Ford Performance Parts F-150 supercharger kits are designed to put approximately 160 hp and 160 ft.-lbs. of torque at the rear wheel. They feature an intercooled design, use the factory throttle body, and include a 95mm mass air meter. Ford Performance Parts F-150 supercharger kits include a Pro-Cal voucher to get your computer custom-calibrated.
( 1 )
$9,619.99
ACDelco GM Genuine Parts turbocharger actuators are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for your Chevrolet, Buick, GMC, or Cadillac vehicle. For optimal performance, choose a replacement turbocharger actuator that you know will fit and function like the original from ACDelco GM Genuine Parts.
( 4 )
$712.99
On Sale
Summit Bucks
Summit Racing™ Performance turbochargers have the latest in compressor aero technology with quick-spooling, yet free-flowing turbines. Starting with 66mm inducer sizes and working up to 79mm, the SUM-2600 Series turbos are reliable and a great value. The SUM-2700 Series are true race turbos starting at 76mm and go up from there. T4, T6, and V-band turbine housings are available. These are specially designed, balanced, and precision assembled in North America for class leading racers. They feature 2618 billet forged compressor wheels that offer superior flow and dependability at high boost.
( 7 )
$1,695.99
$689.99
—
$2,119.99
VS Racing offers a wide range of turbochargers for your horsepower-boosting target. Whether you need greater airflow for racing, some boost for the street, a higher A/R ratio for smoothness, or a low A/R ratio for the drag strip, VS has a turbo to enhance your performance. They're available in dozens of sizes, configurations, and other options.
( 21 )
$379.00
—
$1,399.00
VS Racing wastegates reduce the risk of blowing your turbocharged engine by controlling the exhaust gases going through the external wastegate turbo system. This helps maintain proper boost pressure on your street and race vehicles. Relieve excess pressure from your turbocharged powerplant with VS Racing wastegates, available in multiple relief diameters. Features, parts, and specs may include: * Black anodized aluminum cap * Cast stainless steel base * Inlet and outlet flanges * Clamps * Various springs
( 7 )
$159.00
—
$189.00
Turbosmart Gen-V Race Port blow-off valves are small, lightweight, high performance components for forced-induction competition level engines. Featuring unique collar designs and internal flow structures, they are 46 to 50 percent lighter and 25 percent smaller than the competition, while flowing 330 cfm, making Turbosmart Gen-V Race Port blow-off valves the highest flowing BOVs of their type on the market. They are offered in several different anodized colors and versions to fit your race application. All are supplied with vacuum fittings, V-band assemblies, and installed springs. Additional features: * Billet 6000 Series aluminum construction * Quick-release V-band collar for ease of installation and removal * MIL-Spec hard-anodized valve guide and stem * High-temperature silicone Nomex® diaphragm * Twin 1/8 in. NPT pressure ports for convenient positioning * 2.0 in. inlet flows over 330 cfm * Collar secured cap for quick spring changes * Most Race Ports have blue spring rated -18 to -14 InHg installed * Female flange version available to suit other manufacturer's 50mm flanges (no weld-on fitting supplied) and is 46 percent lighter * HE (Hall Effect) sensor cap versions allow you to monitor blow-off valve position for diagnostic or tuning purposes * Supercharger-specific versions have a soft pink spring rated -4 InHg installed, so it can stay open at idle, when supercharger is still producing boost
( 2 )
$309.95
—
$509.95
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Receive unprecedented value and add up to 75 percent more horsepower to your small block Chevy with these carbureted entry-level supercharger kits. These kits feature the Vortech PowerHat with diffusion technology and they will produce approximately 5 psi at 5,500 rpm on a mildly modified 350 engine. Additionally, most OEM Saginaw-type power steering pumps can be attached to the Vortech mounting bracket by using the supplied hardware in the kits. Smash that pedal and step into the world of superchargers! Vortech carbureted entry-level supercharger kits have you covered. Important information or requirements for the Vortech carbureted entry-level supercharger kits: * These systems were designed to fit on engines equipped with a "long" water pump and OEM V-belt drives or serpentine accessory drives; for correct belt alignment, the proper accessory drive crank pulley and accessory bracketry must be used * Earlier models equipped with short water pumps will require a long water pump to be installed * Quick Fuel, Demon, or Holley 4150-type, 4-barrel carburetor with mechanical secondaries designed for "blow-though" applications (may require rejetting or minor modification) * High performance, boost-referenced fuel pump * Compressor bypass valve * Accessory belts (will vary per application, depending on accessory configuration and supercharger pulley diameters) * Minor (bottom-side) modifications may be required, depending on the vehicle and type of intake manifold installed on the engine
( 5 )
$3,364.99
—
$5,410.99
Turbosmart Vee Port blow-off valves are an ideal choice if you're looking for high flow, small size, and value! These BOVs feature a unique, variable exhaust port system, providing for the superior venting of excess pressure. Turbosmart Vee Port blow-off valves are the simple, yet effective solution for your application.
( 6 )
$364.95
VS Racing X50 blow-off valves are designed for use on large-capacity turbocharger systems and high-horsepower engines. Featuring a 50mm design, small size, and lightweight construction, VS Racing X50 port blow-off valves provide greater performance through faster turbo spool-up from idle, along with reduced turbo lag between gears. VS Racing X50 port BOVs are ideal for circuit and drag vehicles and trucks—so order today!
( 12 )
$78.00
AEM Electronics Tru-BoostX gauge-type controller kits combine the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for setup and they are fully functional right out of the box. If you want more boost, press the button on the right of the gauge face, and if you want less boost, press the button on the left of the gauge face. It's that simple, and it works! AEM Electronics Tru-BoostX gauge-type controller kits contain everything you need, including an on-board 80 psig pressure sensor, built-in overboost protection with two timed shutdown levels, a scramble boost setting, and a low-side output for a warning light. AEM includes a boost control solenoid that is specifically manufactured for automotive boost applications. This means that it will not corrode and stick from exposure to rich fuel mixtures, is pressure-tested to 100 psi, and includes -4 AN fittings to eliminate any chance of leaks.
( 3 )
$380.95
S&B Filters cold side intercooler pipes deliver maximum performance--less restriction and more airflow. With an excellent build that is also constructed for an easier installation, the pipes feature a 2-piece CAC pipe and silicone hose design. The 3.50 in. diameter polished aluminum intercooler pipe is larger than stock and is less restrictive, and the 5-ply Aramid-reinforced silicone hose is not only stronger than OE, but also built to last. They are fitted with heavy-duty, spring-loaded T-bolt clamps and a 3/4 in. wide stainless steel band and bridge. Less restriction means more airflow, and more airflow equals better performance. Replace failure-prone OEM intercooler pipes that are known to burst and leave you stranded with better, stronger, and more efficient S&B Filters cold side intercooler pipes.
( 11 )
$129.00
—
$299.00
Fleece Performance Cheetah Holset turbochargers are 100 percent drop-in, bolt-on, and enjoy big top-end power units. These turbos provide quick and smooth throttle response, lower EGT's, and stock-like spooling with 40 to 45 psi operating range. They use a high-flow turbine wheel and Fleece's 63mm billet compressor wheel in order to support up to 650 rwhp. Give your diesel truck the kind of bolt-on performance most vehicles only dream of—with Fleece Performance Cheetah Holset turbochargers!
( 3 )
$1,847.50
—
$4,499.00
Precision Turbo and Engine Gen2 wastegates are high-quality, economical, and perfect for the automotive enthusiast looking to get the most from their turbocharged car, truck, or any other vehicle. PTE's Gen2 external wastegates are fully adjustable, designed to be direct-fit replacements for other units on the market, and compatible with most aftermarket manual or electronic boost controllers for ease of use. Features: * High-grade, high-temperature stainless steel and billet aluminum components for the best in strength, style and functionality * A 347 stainless investment cast valve body to provide consistent performance without fatigue or failure, while also allowing for accurate boost control * An internal Nickel Chromium alloy valve * Several different 17-7 precipitation hardened springs for further adjustment of boost levels * Standard clamp-style configuration for easy mounting * A satin black anodized finish with 6061 aluminum billet cap * All clamps necessary for installation * Warranted to be free from manufacturers defect for a period of 12 months or 12,000 miles
Not Yet Reviewed
$324.79
—
$481.59
Garrett vent external wastegates optimize the flow of exhaust gases, providing greater control and performance. They accomplish this by venting exhaust gas around the turbine stage of the turbocharger to regulate turbocharger shaft speed, and they are CFD tested for maximum flow, thermal efficiency, and optimum boost control. Their optimized actuation, stability, and temperature resistance offer superior durability. Garrett vent external wastegates are available in several sizes with anodized aluminum actuator covers in several colors. Springs (3 to 25psi), fittings, flanges, and V-bands are included. Select the size and color preferred. Additional features and specs: * Base pressure: 14.7 psi/1 Bar * Robust design for easy diaphragm replacement * Cap design makes spring changes and serviceability easier and more reliable to perform * Liquid-cooled actuator ports for use on severe application
Not Yet Reviewed
$467.99
—
$781.99
ACDelco GM Genuine Parts superchargers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Make the right choice for your GM vehicle; choose ACDelco GM Genuine Parts superchargers.
Not Yet Reviewed
$2,357.99
Install smarter boost management with Turbosmart e-Boost 2! These electronic boost controllers give you ultimate control over the boost curve with smart features designed to get results. Engineered to win, Turbosmart e-Boost 2 boost controllers lead the class with 60 psi max boost operating pressure. They allow you to control, monitor, map, and compensate boost, plus control water spray, methanol or nitrous injection, manage shift/warning lights, and read/monitor rpm! Their state-of-the-art software is easy and logical to use, so you can confidently control all aspects of the boost curve--set point, gate pressure, and sensitivity. Whether you have a top-level racer or street-going vehicle, if it's turbocharged, make it Turbosmart-charged with Turbosmart e-Boost 2 boost controllers!
( 2 )
$513.75
—
$629.95
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Their centrifugal supercharger kits feature lightweight aluminum impellers that are heat-treated and high-speed balanced to ensure smooth operation. An O-ring compressor housing seal and an innovative impeller seal improve sealing and reduce friction. Vortech has taken away the headaches of building a custom kit by engineering these kits to have a true OEM-quality fit and finish. Each kit is 100 percent complete, right down to the wire ties. Most kits include a matched compressor supercharger unit with SQ technology for "Super Quiet" operation. A high-flow air intake system with a reusable air filter, heat-resistant silicone hose couplings, and premium-grade flex hose is included as well. Additional features: * Flow-tested cast aluminum and/or urethane air discharge tubing * OEM-style, heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware * Choice of satin or polished finish * Step-by-step, fully illustrated installation manual
( 9 )
$3,633.99
—
$10,390.99
Unlock exhilarating performance from your 2022 Mustang with 750 horsepower and 670 lbs.-ft. of torque provided by the Roush 5.0L Mustang Phase 2 Supercharger kits! Building off the 5.0L V8 engine, the Roush Supercharger adds an impressive 300 hp and 260 lbs.-ft. of torque over the stock engine. Included in these Roush Supercharger kits is their high-capacity cooling technology with a full-face low temperature radiator. The larger low temperature radiator provides increased cooling capability, allows for greater power output, and delivers maximum performance. Compatible with both automatic and manual transmission vehicles, these Roush Supercharger kits feature Eaton's coveted TVS R2650 technology for increased power output throughout the rpm band and are engineered for durability with large bearing and timing gears. The 2022 Mustang Supercharger kit by Roush had to meet new Tier 3 Emissions Standards required on the base Mustang for this model year. Roush achieved this by incorporating a hydrocarbon trap in the air induction system as well as a unique calibration for the 2022 model year. Thanks to massive engineering efforts, they were able to maintain previous model year performance targets for power and torque. Because Roush is with you on this ride, their Supercharger kit includes the Roush's 3-year/36,000-mile Limited Powertrain Warranty when installed by an ASE certified technician. The Supercharger kit's calibration is optimized for 93-octane fuel but is also compatible with premium fuel. Product features and highlights: * Fits 2022 Mustang GT 5.0L V8 * Produces 750 horsepower and 670 lbs.-ft. of torque! * High-Capacity Cooling Technology with a full-face low temperature radiator * Compatible with both automatic and manual transmissions * Features Eaton's TVS R2650 technology for increased power output throughout the rpm band * Engineered for durability with large bearings and timing gears * Calibration optimized for 93 octane fuel, compatible with premium fuel * Includes all necessary installation hardware Note: Not compatible with Ford Mustang 5.0L equipped to meet Euro 6.2 emission standards. (Euro 6.2 dictates the use of particulate filters which are not compatible with the ROUSH Supercharger system). Not compatible with Mach 1, Bullitt, or GT350.
Not Yet Reviewed
$8,799.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
