Availability
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because of their relationship to engine speed, superchargers commonly provide a power curve that increases with engine rpm, delivering boost with rapid response.
There are two main styles of superchargers: Roots and centrifugal. Roots-style superchargers use a pair of rotors within a housing to force air at higher than atmospheric pressure into your engines. The rotors can have a varying number of lobes and may be twisted, affecting how the air flows through the supercharger. Centrifugal style superchargers utilize a gearbox to spin a shaft, which is connected to compressor wheel, drawing in ambient air and compressing it on its way to the engine.
Turbochargers utilize the exhaust gases produced by your engine to spin a turbine wheel located inside the turbocharger housing, which is connected to a compressor wheel by a shaft. As the two wheels turn, ambient air is sucked into the turbocharger’s compressor inlet and pushed into the engine. That air charge is often passed through an intercooler to increase its density.
Choosing the right turbocharger kit for your vehicle can be daunting, with factors like tubing size, A/R ratio, and multiple other factors to consider. However, Summit Racing makes it easy by offering turbocharger kits custom-designed for a wide range of vehicles, so you can get all the benefits without major engineering work.
For even more helpful information about the difference between superchargers and turbochargers, check out this helpful article at OnAllCylinders.com.
Summit Racing has everything you need to take your engine’s performance to the next level with a complete supercharger or turbocharger kit. If you’re looking for a complete, pre-designed, bolt-on solution, we’ve got you covered. But if you want to take the plunge into every aspect of blow off valves, wastegates, piping, intercoolers, boost controllers, and more, we can help you there, too. Summit Racing only carries quality parts from trusted brands like Precision, Garrett, Turbosmart, Turbonetics, Edelbrock, Magnuson, ProCharger, and more, so you can complete your supercharger or turbocharger build with confidence.
Showing In Stock Items. Show All 84 Items.
BTR tubing V-band couplers, also called V-band clamps, are used to fit together two matching flanges and are available in a range of sizes and materials. The clamp has a V-shaped groove that wraps around the two flanges, bringing them together and creating a seal. These are often used to connect exhaust system or water system pipes. Select the BTR tubing V-band couplers based on the pipe the size you need to connect them to.
Not Yet Reviewed
$28.99
—
$49.99
Turbosmart Kompact Blow-Off Valve BOV5 V-Band adapters are designed for Dual Port, Plumb Back, and Supersonic Universal Fit blow-off valves. These adapters allow you to convert your universal BOV for use with different size fittings and pipes (depending on application). They're made from factory materials and specifications to ensure proper fitment and performance.
Not Yet Reviewed
$39.95
Turbosmart Gen-V Race Port blow-off valves are small, lightweight, high performance components for forced-induction competition level engines. Featuring unique collar designs and internal flow structures, they are 46 to 50 percent lighter and 25 percent smaller than the competition, while flowing 330 cfm, making Turbosmart Gen-V Race Port blow-off valves the highest flowing BOVs of their type on the market. They are offered in several different anodized colors and versions to fit your race application. All are supplied with vacuum fittings, V-band assemblies, and installed springs. Additional features: * Billet 6000 Series aluminum construction * Quick-release V-band collar for ease of installation and removal * MIL-Spec hard-anodized valve guide and stem * High-temperature silicone Nomex® diaphragm * Twin 1/8 in. NPT pressure ports for convenient positioning * 2.0 in. inlet flows over 330 cfm * Collar secured cap for quick spring changes * Most Race Ports have blue spring rated -18 to -14 InHg installed * Female flange version available to suit other manufacturer's 50mm flanges (no weld-on fitting supplied) and is 46 percent lighter * HE (Hall Effect) sensor cap versions allow you to monitor blow-off valve position for diagnostic or tuning purposes * Supercharger-specific versions have a soft pink spring rated -4 InHg installed, so it can stay open at idle, when supercharger is still producing boost
( 2 )
$309.95
—
$509.95
Turbosmart Gen-V Hyper-Gate mechanical wastegates are a direct-fit upgrade to all 4th-generation Turbosmart wastegates. Gen-V models feature a unique collar-locking system, rotatable actuator, strap-type V-band clamps, 1/8 in. NPT ports, and optional liquid cooling. The units are built with a cast stainless steel housing, aluminum top, and anodized finish—for a great-looking wastegate under any hood!
Not Yet Reviewed
$444.95
—
$449.95
Turbosmart Gen-V WG60CG Pro-Gate compressed gas wastegates are cost-effective, high-performing 60mm units. They're designed for control strategies that actively bias the top chamber with high pressure for large boost bandwidth operation, such as CO2 drag racing or compressed-air WRC applications. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, they feature a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, optional liquid cooling, 1/8 in. NPT ports—and provide a range of springs. Turbosmart Gen-V WG60CG Pro-Gate compressed gas wastegates are engineered to win!
Not Yet Reviewed
$704.95
Turbosmart Gen-V WG50 Pro-Gate external wastegates are cost-effective, high-performing 50mm units. They provide extensive user configurability, world-leading extended thermal performance, fatigue resistance and best-in-class flow performance for optimum control and longevity. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, the Gen-V features a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8 in. NPT ports—and provides a range of springs.
Not Yet Reviewed
$529.95
—
$534.95
Turbosmart Gen-V WG50CG Pro-Gate compressed gas wastegates are cost-effective, high-performing 50mm units. They're designed for control strategies that actively bias the top chamber with high pressure for large boost bandwidth operation, such as CO2 drag racing or compressed-air WRC applications. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, they feature a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, optional liquid cooling, 1/8 in. NPT ports—and provide a range of springs. Turbosmart Gen-V WG50CG Pro-Gate compressed gas wastegates are engineered to win!
Not Yet Reviewed
$559.95
Turbosmart Gen-V Hyper-Gate 45 Lite mechanical wastegates are cost effective, high performing 45mm external wastegates with a compact actuator for use in engine bays with limited space. The Gen-V provides extensive user configuration, world leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. Turbosmart's Gen-V Hyper-Gate 45s have stainless steel bodies with black aluminum tops and are also offered in their Sleeper Series, providing a stealth appearance that goes black-on-black for those wanting a unique look under the hood, wish to keep a low-profile, or just want some limited-edition cred. All styles are direct-fit upgrades to all 4th-generation Turbosmart wastegates and feature Turbosmart's unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8 in. NPT ports, and are provided with a range of 17/7 PH stainless steel springs. Choose the model best suited to your needs.
Not Yet Reviewed
$434.49
—
$444.95
Turbosmart Gen-V WG60 Power-Gate wastegates are cost-effective, high-performing 60mm units. They provide extensive user configurability, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, they feature a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8 in. NPT ports—and provide a range of springs. Turbosmart Gen-V WG60 Power-Gate wastegates are engineered to win!
Not Yet Reviewed
$674.95
—
$679.95
Turbosmart Gen-V Comp-Gate electronic wastegates are built on the successful, class leading Gen-V Comp-Gate 40 architecture. Starting with a Turbosmart Gen-V wastegate body, you can be confident the mounting orientation will match your existing manifold and outlet hardware. The Gen-V Comp-Gate 40 already had class leading flow capacity and heat handling characteristics. There are no springs, no hoses and no boost reference signal, nor any of the limitations associated with any of them. Gone, are minimum boost levels associated with base spring pressure or the heat related issues with hoses. If your manifold priority is good enough, you can set boost anywhere from zero up to "all of it" from your laptop or tuning interface. Additional features: * Aluminum and cast stainless steel construction * Black anodized finish on top cap * Nitronic 40 valve guide and high-temperature 347 SS body * Liquid cooled, electronic actuator * Strap-type V-band clamps * 1/8 in. NPT * User adjustable actuator position * Onboard analog 0-5 V wastegate position sensor * Onboard analog 0-5 V actuator temperature sensor
Not Yet Reviewed
$934.95
Turbosmart Gen-V Pro-Gate electronic wastegates feature a Gen-V wastegate body, so you can be confident the mounting orientation will match your existing manifold and outlet hardware. Built on the successful class leading Gen-V Comp-Gate 50 architecture, these units have stellar flow capacity and heat handling characteristics, as well as unparalleled control. There are no springs or hoses and no boost reference signal, nor any of the limitations associated with any of them. Gone are minimum boost levels associated with base spring pressure or heat related issues with hoses. If your manifold priority is good enough, you can set your boost anywhere from zero up to "all of it" from a laptop or tuning interface. Additional features: * Aluminum and cast stainless steel construction * Black anodized finish on top cap * Nitronic 40 valve guide and high-temperature 347 SS body * Liquid cooled, electronic actuator * Strap-type V-band clamps * 1/8 in. NPT * User adjustable actuator position * Onboard analog 0-5 V wastegate position sensor * Onboard analog 0-5 V actuator temperature sensor
Not Yet Reviewed
$1,074.95
Turbosmart Gen-V Hyper-Gate 45CG (Compressed Gas) mechanical wastegates are designed for control strategies that actively bias the top chamber with high pressure for large boost bandwidth operation, such as CO2 drag racing or compressed air WRC applications. The 45CGs feature an inverted diaphragm to maximize diaphragm life from high-pressure CO2 or compressed air systems. Turbosmart Gen-Vs provide extensive user configurability, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. A direct-fit upgrade to all Gen4 Turbosmart wastegates, the Gen-Vs feature the unique collar-locking system, variable actuator cap and base for easy, 360-degree optional routing of reference hoses, strap-type V-band clamps, optional liquid-cooling provision, 1/8 in. NPT reference ports, and are provided with the full range of available springs. Additional features: * Nitronic 60 valve guide and high-temperature 347 stainless steel body * 17/7 PH stainless steel springs * Liquid actuator cooling option * User adjustable actuator position * Modular design for actuator interchangeability
Not Yet Reviewed
$494.95
VS Racing offers a wide range of turbochargers for your horsepower-boosting target. Whether you need greater airflow for racing, some boost for the street, a higher A/R ratio for smoothness, or a low A/R ratio for the drag strip, VS has a turbo to enhance your performance. They're available in dozens of sizes, configurations, and other options.
( 22 )
$379.00
—
$928.00
Precision Turbo and Engine LS-Series turbochargers are built with the LS enthusiast in mind. They are available in different turbine housings that are ideal for either a single or twin turbo application. Get ahead of your competition with race-winning Precision LS-Series turbochargers!
Not Yet Reviewed
$998.08
Summit Racing™ Turbo adapters help you get that Turbo mounted quickly and right the first time. Made from cast stainless steel with thick warp free flanges, they allow you to convert from a v-band to a flange or a flange to a v-band. Available in straight or 90 degree they feature smooth internal shapes for maximum flow and sealing.
( 4 )
$48.99
—
$70.99
Summit Racing™ turbocharger discharge flanges make it easy to convert your V-band compressor to a slip-fit hose connection. Made from billet aluminum and supplied with a band clamp, our turbocharger discharge flanges come in 3 in. or 3.5 in. outlet diameters. Choose the one needed for your turbocharger.
( 2 )
$49.99
Granatelli Motor Sports turbo adapters allow you to adapt the most popular turbo and exhaust manifold flanges to a V-band connection and maintain a low-profile for adequate clearance for turbo installations. These turbo flange V-band adapters are stainless steel cast and machined with mounting holes, in threaded or non-threaded flange applications, depending on your needs.
Not Yet Reviewed
$59.85
—
$69.83
On Sale
Summit Bucks
Summit Racing™ Performance turbochargers have the latest in compressor aero technology with quick-spooling, yet free-flowing turbines. Starting with 66mm inducer sizes and working up to 79mm, the SUM-2600 Series turbos are reliable and a great value. The SUM-2700 Series are true race turbos starting at 76mm and go up from there. T4, T6, and V-band turbine housings are available. These are specially designed, balanced, and precision assembled in North America for class leading racers. They feature 2618 billet forged compressor wheels that offer superior flow and dependability at high boost.
( 7 )
$1,695.99
$689.99
—
$2,119.99
GFB offers a range of high-flowing external wastegates that are small—the most compact size in their class—but are big on flow! These external wastegates are built to cope with the extreme conditions and the harsh environment that's associated with high-boost and exhaust temperatures. Key features include: * Most compact wastegate range on the market for easy installation in tight locations * Body, valve, seat and all mounting hardware is CNC-machined from high-temp stainless steel * Actuator housing CNC-machined from billet 6061 aluminum * Nomex-reinforced silicone diaphragm * Internal shroud protects valve stem from excessive heat and prevents carbon-related sticking * V-band clamp mounting system * Made in Australia under ISO 9001
Not Yet Reviewed
$364.50
—
$594.00
Turbosmart TS-2 Performance turbochargers are smaller, lighter, and faster. They were developed to leverage modern materials, design, and manufacturing techniques to create a turbocharger range that meets the demands of both Motorsport and performance enthusiasts alike. Turbosmart TS-2 Series are water and oil cooled turbochargers with lightweight investment cast turbine housings, along with a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know from Turbosmart. The ultra-low rotating mass of their unique bearing and shaft assembly is matched to aggressive compressor aerodynamics, ensuring high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained. The TS-2 Series has taken an engine end-to-end approach, aiming to achieve power through reduced back pressure and high performance turbines. They are available in V-band options, various ARs, and internally or externally wastegated. Choose the one that meets your desire for power. Key features: * Unparalleled transient response * Aggressive aerodynamics with 7+7 splitter wheels * Lightweight 310s stainless steel investment cast turbine housings * Lightweight aluminum compressor covers * CFD driven designed housings for optimal ARs and flow * T14 Inconel turbine wheel for extreme EGT's * VSR speed balanced * Proprietary dual ceramic bearing system * Integrated Iron backplate on center housing
Not Yet Reviewed
$2,229.95
Precision Turbo and Engine offers 50mm blow-off valve flanges in both aluminum and stainless steel. These replacements connect a blow-off valve to the intercooler piping in a turbocharged engine system. They provide a secure and sealed connection, allowing the BOV to relieve excess pressure and prevent damage to the turbocharger. The V-band style flanges can be easily welded onto your application.
Not Yet Reviewed
$40.36
Garrett Performance offers turbo installation kits for a variety of models, including Turboworx GT30/35 and GTX30/35. They are available to fit Garrett V-Band/V-Band, T3 Divided/V-Band, or T4 Open/V-Band turbine housings. The kits include drain line with fittings, -4 AN x 3 ft. stainless steel feed line, inlet gasket and outlet flange, -4 oil restrictor fitting, and .035 in. and water jacket fittings. (See Notes above for specific part details.) Order the installation kit recommended for your turbocharger application.
Not Yet Reviewed
$144.99
—
$159.99
Vibrant Performance blow-off valve weld-on flanges make it easy to weld blow-off valve flanges to your induction plumbing. They come complete with a radiused weld-on fitting that is threaded so that you can screw on the mating flange, as well as an O-ring, for a leak-free seal. These components are made of high-quality aluminum to ensure a high level of performance. If you need a blow-off valve weld-on flange, Vibrant Performance has you covered.
( 6 )
$26.99
—
$69.99
Turbosmart TS-1 Performance turbochargers are smaller, lighter, and faster. They were developed to leverage modern materials, design, and manufacturing techniques to create a turbocharger range that meets the demands of both Motorsport and performance enthusiasts alike. Turbosmart TS-1 Series are oil cooled turbochargers with lightweight stainless steel investment cast turbine housings, along with a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know from Turbosmart. The ultra-low rotating mass of their unique bearing and shaft assembly is matched to aggressive compressor aerodynamics, ensuring high levels of performance at lower shaft speeds which is mated with a unique T14 Inconel turbine wheel to ensure power at high loads and flow is maintained. The TS-1 turbocharger Series has taken a "whole engine" approach to increasing performance, aiming to achieve power through reduced back pressure and high performance turbines. They are available in V-band and various T4 flange options, reverse rotation, and various ARs. Choose the one that meets your desire for power. Features: * Unparalleled transient response * Aggressive aerodynamics with 7+7 splitter wheels * Lightweight 310s stainless steel investment cast turbine housings * Lightweight aluminum compressor covers * CFD driven designed housings for optimal ARs and flow * T14 Inconel turbine wheel for extreme EGT's * VSR speed balanced * Proprietary dual ceramic bearing system * Integrated iron backplate on center housing
Not Yet Reviewed
$1,914.95
—
$2,729.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
