Availability
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because of their relationship to engine speed, superchargers commonly provide a power curve that increases with engine rpm, delivering boost with rapid response.
There are two main styles of superchargers: Roots and centrifugal. Roots-style superchargers use a pair of rotors within a housing to force air at higher than atmospheric pressure into your engines. The rotors can have a varying number of lobes and may be twisted, affecting how the air flows through the supercharger. Centrifugal style superchargers utilize a gearbox to spin a shaft, which is connected to compressor wheel, drawing in ambient air and compressing it on its way to the engine.
Turbochargers utilize the exhaust gases produced by your engine to spin a turbine wheel located inside the turbocharger housing, which is connected to a compressor wheel by a shaft. As the two wheels turn, ambient air is sucked into the turbocharger’s compressor inlet and pushed into the engine. That air charge is often passed through an intercooler to increase its density.
Choosing the right turbocharger kit for your vehicle can be daunting, with factors like tubing size, A/R ratio, and multiple other factors to consider. However, Summit Racing makes it easy by offering turbocharger kits custom-designed for a wide range of vehicles, so you can get all the benefits without major engineering work.
For even more helpful information about the difference between superchargers and turbochargers, check out this helpful article at OnAllCylinders.com.
Summit Racing has everything you need to take your engine’s performance to the next level with a complete supercharger or turbocharger kit. If you’re looking for a complete, pre-designed, bolt-on solution, we’ve got you covered. But if you want to take the plunge into every aspect of blow off valves, wastegates, piping, intercoolers, boost controllers, and more, we can help you there, too. Summit Racing only carries quality parts from trusted brands like Precision, Garrett, Turbosmart, Turbonetics, Edelbrock, Magnuson, ProCharger, and more, so you can complete your supercharger or turbocharger build with confidence.
Showing In Stock Items. Show All 155 Items.
Vortec V-7 Series superchargers incorporate superior design with the manufacturing and testing that make Vortech famous. These superchargers use precision-ground gears to drive their impellers, so the impeller requires minimum clearance. This contributes to Vortech's superior efficiency and durability. The V-Series superchargers are available in two trim levels, so you are sure to get the right setup for your application.
Not Yet Reviewed
$4,433.99
—
$4,665.99
Vortech V-1 Series superchargers incorporate superior design, together with manufacturing and testing standards that make Vortech famous. These superchargers use precision-ground gears to drive their impellers, so the impeller requires minimum clearance. This contributes to Vortech's superior efficiency and durability. V-1 Series superchargers are available in multiple trim levels to help you achieve the setup you need. Select the finish, rotation, discharge, and other options preferred for your application.
Not Yet Reviewed
$4,257.99
BD Diesel remanufactured turbo head units use the latest in aerodynamic technology and materials that feature lightweight, extended-tip compressor wheels with high-flow blade design characteristics for improved throttle response time. They offer cooler exhaust temperatures, improved engine brake retarding power, and the most rugged bearing system in the turbo industry. They feature a new look with natural finished cast aluminum that meets the highest of standards. If you're looking for a remanufactured turbo head unit that will give you consistent, dependable performance, BD Diesel remanufactured turbo head units won't let you down.
Not Yet Reviewed
$1,539.95
—
$3,036.00
Dorman turbochargers head units restore drivability, as well as engine power and/or efficiency. These turbocharger and gasket kits are offer as direct replacements for the best possible fit and function in a wide number of applications. They are quality engineered from durable materials to eliminate grinding, whining, and other noise-related issues you would experience due to a faulty turbocharger. Dorman turbocharger and gasket kits include installation components, and on-vehicle testing was conducted to ensure trouble-free operation in your vehicle.
( 20 )
$583.99
—
$1,005.99
Summit Bucks
Edelbrock E-Force Universal Head Units use Eaton R2650 rotors. This is a front drive, front inlet, blow-down style supercharger housing intended for universal and custom applications. The high twist, 4-lobe R2650 rotor design is 15 percent larger than the TVS 2300 and features several improvements to maximize efficiency and performance at upper rpms. Improvements and advantages of R2650 rotors over R2300 rotors: * 170 degree twist (verses 160) * Better sealing with optimized length-to-diameter ratio * Increased durability with larger bearings and timing gears * Pressure relief ports in bearing plate for reduced input power * 4 percent more efficient * 15 percent larger displacement * 18 percent less input power required * 25 percent more airflow at 18,000 rpm and 14 psi boost (2.0 pressure ratio)
Not Yet Reviewed
$2,697.95
If you've accidently damaged your existing G-Force boost controller head unit, then worry no more—Go Fast Bits offers a genuine replacement head unit for your compatible boost controller model, so you don't need to buy a full replacement boost controller kit! This is a replacement boost controller head unit only and does not include any other fitting hardware or sensors.
Not Yet Reviewed
$254.70
If you've accidently damaged your existing D-Force boost controller head unit, then worry no more—Go Fast Bits offers a genuine replacement head unit for your compatible boost controller model, so you don't need to buy a full replacement boost controller kit! This is a replacement boost controller head unit only and does not include any other fitting hardware or sensors.
Not Yet Reviewed
$254.70
BD Diesel remanufactured performance turbo head units use the latest in aerodynamic technology and materials that feature upgraded 58mm lightweight extended-tip compressor wheels with high-flow blade design characteristics for improved throttle response time. They offer cooler exhaust temperatures, improved engine brake retarding power, and the most rugged bearing system in the turbo industry. Their updated look with natural finished cast aluminum meets the highest of standards. If you're looking for a remanufactured turbo head unit that will give you consistent, dependable performance, BD Diesel remanufactured performance turbo head units won't let you down.
Not Yet Reviewed
$2,130.00
BD Diesel Screamer turbochargers may offer a stock drop-in installation and appearance, but they are anything but stock! They feature a larger ballistic billet compressor wheel and BD's exclusive turbine profile that results in reduced backpressure and increased turbine flow compared to the competition. You get more potential maximum power output, right up to 690 hp with performance modifications. Each turbocharger is high-speed balanced with the actuator stroke tested prior to shipping.
( 2 )
$2,230.00
—
$2,995.00
Turbonetics drop-in upgrade turbochargers are just that--easy to install, no adaptors needed direct replacements that offer more power. These innovative, twin-scroll turbo upgrades will significantly increase horsepower while being bolt-on compatible with all of the factory components--including the oil and water fittings. They feature Turbonetics high-efficiency NX2 compressor and turbine wheels. Plus, the investment cast HK30 stainless steel turbine housing can easily handle high heat and still look good. You get to maintain drivability while making more power--up to 520 hp with supporting mods. In less than an hour, you can wake up your ride with Turbonetics drop-in upgrade turbochargers.
( 4 )
$2,634.23
On Sale
Dinan Big Turbos are the ultimate upgrades for racing enthusiasts to fully maximize the power output of your engine. The compressor wheel inside the turbocharger is increased in size enabling additional boost pressures, and thus increased horsepower at higher engine speeds--all while retaining efficiency. These are with an upgraded thrust system to ensure reliable and prolonged life. They are available as brand new units with a new stock turbine custom cast and manufactured, or as rebuilt factory units machined to Dinan specifications. Both come with an upgraded thrust system to ensure reliable, prolonged life. Dinan Big Turbos feature: * Larger billet compressor/impeller wheel that allows 30 percent greater flow over stock which then enables additional boost to be realized while retaining efficiency. * Dinan Installation instructions detail a procedure which is quicker than BMW's turbo replacement procedure saving the end-user money and time at the shop (Applicable to RWD vehicles only). * Includes O-rings and gaskets needed for complete installation on a RWD vehicle only.
Not Yet Reviewed
$1,799.95
$1,618.95
Here's a perfect power match for stock or modified engines--BD Diesel Turbo Thruster II turbochargers. Designed as direct, bolt-in replacements for your stock turbo, they offer superior pressure ratios, cooler EGTs, and increased airflow with no compressor surging. The compressor housing design and back plate casting will improve turbo spool-up time and allow for full housing rotation for an easier installation. The rotating assembly uses journal bearings and a new 360 degree bronze thrust washer for extended bearing life and makes future service a lot easier. Give your rig more power with BD Diesel Turbo Thruster II turbochargers.
Not Yet Reviewed
$1,921.95
Magnuson supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. This technology recalibrates the engine and transmission control programs to work with the altered induction path and boost pressure of the supercharger. And that produces a seamless and consistent delivery of power over the entire rpm range--not just the high end! For you, that means Magnuson superchargers will boost your power output, and yet run like their factory installed units. Whether you're driving a Corvette or a Cadillac, a Silverado or a Hummer, or a Camaro or a Mustang, Magnuson supercharger kits deliver maximum performance!
( 12 )
$4,195.00
—
$8,995.00
Precision Turbo and Engine Gen2 wastegates are high-quality, economical, and perfect for the automotive enthusiast looking to get the most from their turbocharged car, truck, or any other vehicle. PTE's Gen2 external wastegates are fully adjustable, designed to be direct-fit replacements for other units on the market, and compatible with most aftermarket manual or electronic boost controllers for ease of use. Features: * High-grade, high-temperature stainless steel and billet aluminum components for the best in strength, style and functionality * A 347 stainless investment cast valve body to provide consistent performance without fatigue or failure, while also allowing for accurate boost control * An internal Nickel Chromium alloy valve * Several different 17-7 precipitation hardened springs for further adjustment of boost levels * Standard clamp-style configuration for easy mounting * A satin black anodized finish with 6061 aluminum billet cap * All clamps necessary for installation * Warranted to be free from manufacturers defect for a period of 12 months or 12,000 miles
Not Yet Reviewed
$324.79
—
$481.59
The passion of power. BorgWarner AirWerks Series turbochargers provide durable, scalable, strong boost for enthusiasts who want a more powerful replacement or customizable turbocharger. Focused on creating exceptionally high engine performance through forced induction technology, they offer faster spool-up at lower engine speeds and powerful boost for top-end performance. The AirWerks Series includes a range of units supporting 120 to 1,875 hp per turbocharger. Depending on unit selected, features may include: * Innovative extended-tip technology delivers the increased airflow of a larger compressor wheel with the lower mass of a smaller, low-inertia wheel * Next generation Forged Milled Compressor Wheels (FMW Technology) * 360 thrust bearings for increased reliability at higher turbo pressure ratios * Serviceable twin hydrodynamic journal bearings
( 20 )
$809.99
—
$1,183.99
Turbosmart Gen-V Hyper-Gate mechanical wastegates are a direct-fit upgrade to all 4th-generation Turbosmart wastegates. Gen-V models feature a unique collar-locking system, rotatable actuator, strap-type V-band clamps, 1/8 in. NPT ports, and optional liquid cooling. The units are built with a cast stainless steel housing, aluminum top, and anodized finish—for a great-looking wastegate under any hood!
Not Yet Reviewed
$466.95
—
$471.95
Want to achieve the perfect cooling capacity needed for your turbocharged engine application? Then consider one of our Summit Racing™ universal intercoolers. Each unit features a bar/plate design and is constructed from quality 6061 aluminum and then TIG-welded to perfection. These intercoolers are perfect for a front mount application. Reducing induction air temperatures, while significantly improving engine output is easy with a Summit Racing™ universal intercoolers. Order the size, finish, and inlet/outlet diameters needed for your vehicle.
( 14 )
$173.99
—
$598.99
If you're seeking exciting performance out of a drop-in-and-go unit, then you need Fleece Performance Cheetah FMW HX35 turbochargers. They feature a high-flow turbine wheel, a 63mm FMW compressor, and reduced EGTs. These turbos do not require specialized tuning, and yet they provide quick response, excellent overall drivability, and support up to 650 RWHP. Whether you want more seat-of-the-pants performance, or torque for towing, Fleece Performance Cheetah FMW HX35 turbochargers have you covered. Important application information: Customers with 1994-2002 vehicles need to look at the pictures of part numbers FLE-FPE-HX35-GTC, -LWG, and -SWG and compare the wastegate orientation and bracket on stock units to find the correct turbo. Refer to the Notes section for additional information.
Not Yet Reviewed
$1,699.00
Turbosmart Gen-V WG50 Pro-Gate external wastegates are cost-effective, high-performing 50mm units. They provide extensive user configurability, world-leading extended thermal performance, fatigue resistance and best-in-class flow performance for optimum control and longevity. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, the Gen-V features a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, liquid-cooling, 1/8 in. NPT ports—and provides a range of springs.
Not Yet Reviewed
$555.95
—
$561.95
Summit Racing™ Pro wastegates are designed to relieve excess pressure from your turbocharged powerplant. The Pro wastegates help reduce the risk of blowing your turbocharged engine by controlling the exhaust gases going through the external wastegate turbo system. To help maintain proper boost pressure on your street and race vehicle, give one of these cost-effective, high-performing Pro wastegate units by Summit Racing™ a go!
( 4 )
$309.99
—
$364.99
Fleece Performance Cheetah Holset turbochargers are 100 percent drop-in, bolt-on, and enjoy big top-end power units. These turbos provide quick and smooth throttle response, lower EGT's, and stock-like spooling with 40 to 45 psi operating range. They use a high-flow turbine wheel and Fleece's 63mm billet compressor wheel in order to support up to 650 rwhp. Give your diesel truck the kind of bolt-on performance most vehicles only dream of—with Fleece Performance Cheetah Holset turbochargers!
( 3 )
$1,847.50
—
$4,499.00
Summit Racing™ OE replacement turbochargers are the best choice to replace your worn out, leaking, or failed original equipment units. With more and more vehicles coming turbocharged from the factory, the reality is that most turbos start leaking or the bearings wear out long before the life of the car or truck does and will need to be replaced. We are proud to offer these replacement turbos for various applications, choose the right one for your car or truck. Check out these features and benefits: * 100 percent brand new construction * Direct-fit left and right available * EM spec-cartridge and turbine wheel * OEM spec-housings on brand NEW tooling: tighter tolerances and better finish * Billet compressor wheel with revised and updated Aero: more torque over OEM and OEM replacements * OEM spec rotating assembly for hassle-free operation and longevity * OEM spec oil feed/drain and coolant inlet/outlet: plug-and-play with your existing oil and coolant lines * Increase horsepower, torque, and fuel efficiency over worn OEM turbochargers
( 1 )
$349.99
—
$649.99
On Sale
Fluidyne heat exchangers and intercoolers are designed to keep your turbocharged or supercharged engine working at optimum levels. A cooler intake charge means more power from your engine. These units are made from aluminum and precision-welded for maximum efficiency and durability. The coolers use mounting tabs welded to the outer case for a simple installation. Order the size or model recommended for your application.
( 9 )
$467.00
—
$1,054.00
$373.60
—
$843.20
Turbosmart Gen-V WG60CG Pro-Gate compressed gas wastegates are cost-effective, high-performing 60mm units. They're designed for control strategies that actively bias the top chamber with high pressure for large boost bandwidth operation, such as CO2 drag racing or compressed-air WRC applications. A direct-fit upgrade to all 4th-generation Turbosmart wastegates, they feature a unique collar-locking system, variable actuator cap and base, strap-type V-band clamps, optional liquid cooling, 1/8 in. NPT ports—and provide a range of springs. Turbosmart Gen-V WG60CG Pro-Gate compressed gas wastegates are engineered to win!
Not Yet Reviewed
$739.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
