Availability
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because of their relationship to engine speed, superchargers commonly provide a power curve that increases with engine rpm, delivering boost with rapid response.
There are two main styles of superchargers: Roots and centrifugal. Roots-style superchargers use a pair of rotors within a housing to force air at higher than atmospheric pressure into your engines. The rotors can have a varying number of lobes and may be twisted, affecting how the air flows through the supercharger. Centrifugal style superchargers utilize a gearbox to spin a shaft, which is connected to compressor wheel, drawing in ambient air and compressing it on its way to the engine.
Turbochargers utilize the exhaust gases produced by your engine to spin a turbine wheel located inside the turbocharger housing, which is connected to a compressor wheel by a shaft. As the two wheels turn, ambient air is sucked into the turbocharger’s compressor inlet and pushed into the engine. That air charge is often passed through an intercooler to increase its density.
Choosing the right turbocharger kit for your vehicle can be daunting, with factors like tubing size, A/R ratio, and multiple other factors to consider. However, Summit Racing makes it easy by offering turbocharger kits custom-designed for a wide range of vehicles, so you can get all the benefits without major engineering work.
For even more helpful information about the difference between superchargers and turbochargers, check out this helpful article at OnAllCylinders.com.
Summit Racing has everything you need to take your engine’s performance to the next level with a complete supercharger or turbocharger kit. If you’re looking for a complete, pre-designed, bolt-on solution, we’ve got you covered. But if you want to take the plunge into every aspect of blow off valves, wastegates, piping, intercoolers, boost controllers, and more, we can help you there, too. Summit Racing only carries quality parts from trusted brands like Precision, Garrett, Turbosmart, Turbonetics, Edelbrock, Magnuson, ProCharger, and more, so you can complete your supercharger or turbocharger build with confidence.
Showing In Stock Items. Show All 72 Items.
On Sale
Fleece Performance offers Cheetah FMW VNT turbochargers for a variety of diesel trucks to enhance your driving experience. These drop-in replacements come with a Fleece-engineered 63mm FMW compressor wheel and high-flow Cheetah turbine wheel. You'll enjoy the spool-up and throttle response of a small turbo and still get the big top-end power you're looking for. Rated at up to 650 rear wheel horsepower (depending on model), this is the ultimate combination for dual-purpose applications. If you're towing during the week and sled pulling on the weekend, the 63mm FMW VNT Cheetah is just the ticket. Order the turbo model recommended for your vehicle. Additional details: * Stock appearing: Uses the stock housings with updated internals. This allows you to keep all factory systems intact, yet enables you to safely run 40 psi of boost. No aftermarket components or modifications needed for installation. * Proven Technology: Built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. * Powerful Yet Responsive: Turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end. * Exclusive FMW wheel technology: – Forged milled wheels – Faster spool-up – Increased throttle response – Broader torque curve
( 2 )
$1,979.00
—
$2,649.00
$1,682.15
—
$2,251.65
Summit Racing™ OE replacement turbochargers are the best choice to replace your worn out, leaking, or failed original equipment units. With more and more vehicles coming turbocharged from the factory, the reality is that most turbos start leaking or the bearings wear out long before the life of the car or truck does and will need to be replaced. We are proud to offer these replacement turbos for various applications, choose the right one for your car or truck. Check out these features and benefits: * 100 percent brand new construction * Direct-fit left and right available * EM spec-cartridge and turbine wheel * OEM spec-housings on brand NEW tooling: tighter tolerances and better finish * Billet compressor wheel with revised and updated Aero: more torque over OEM and OEM replacements * OEM spec rotating assembly for hassle-free operation and longevity * OEM spec oil feed/drain and coolant inlet/outlet: plug-and-play with your existing oil and coolant lines * Increase horsepower, torque, and fuel efficiency over worn OEM turbochargers
( 3 )
$349.99
—
$649.99
On Sale
Edelbrock E-Force GM truck and SUV Stage 1 Street Legal supercharger kits up the power in your late model GM truck or SUV. These GM Supercharger systems are specially designed for each application and will allow you to boost your towing performance to impressive levels. These systems feature long intake runners for maximum low end torque making them ideal for towing and off-road performance applications.
( 5 )
$10,803.95
$7,138.76
—
$9,723.56
On Sale
If you're seeking exciting performance out of a drop-in-and-go unit, then you need Fleece Performance Cheetah FMW HX35 turbochargers. They feature a high-flow turbine wheel, a 63mm FMW compressor, and reduced EGTs. These turbos do not require specialized tuning, and yet they provide quick response, excellent overall drivability, and support up to 650 RWHP. Whether you want more seat-of-the-pants performance, or torque for towing, Fleece Performance Cheetah FMW HX35 turbochargers have you covered. Important application information: Customers with 1994-2002 vehicles need to look at the pictures of part numbers FLE-FPE-HX35-GTC, -LWG, and -SWG and compare the wastegate orientation and bracket on stock units to find the correct turbo. Refer to the Notes section for additional information.
Not Yet Reviewed
$1,699.00
$1,444.15
Bosch offers intercooler water pumps for a variety of applications, including many Mercedes-Benz cars and trucks from the early 2000s and up. A faulty water pump is a common source of power loss on Mercedes supercharged motors. These upgraded 100 percent plug-and-play replacements exceed OEM standards and are used on all contemporary AMG vehicles. Select the pump recommended for your ride. All water pumps are tested to ensure proper functionality. Torque testing is performed to verify the proper impeller-shaft mating—and can also detect loose impeller-shaft press fits. The water pumps are vacuum leak tested to ensure proper sealing; this test can detect leaks throughout the housing, seals, tube binding and plug leakage. Bosch utilizes OE mating parts and accessories to verify proper fitment in situations where the isolator grommet and bracket can be re-used. Retain them when removing the previously installed pump.
Not Yet Reviewed
$151.99
Vibrant Performance bellmouth velocity stacks offer less turbulence for better results. Ideal for all motor and forced-induction race applications, these bellmouth-style stacks allow less turbulent air to enter your race engine, resulting in greater airflow performance for ultimately significant torque and horsepower gains with reduced turbo lag! Velocity stacks are spun from 1/8 in. thick T6061 aluminum alloy. Add efficiency for top performance with Vibrant Performance bellmouth velocity stacks.
( 4 )
$49.99
—
$82.99
ADD Offroad intercooler upgrade kits maximize airflow, enhance horsepower, and improve torque. Addictive Desert Designs paired up with one of the leaders in the automotive aftermarket world, aFe Power, to create these comprehensive intercooler kits that cover everyone's needs. They are hand-fabricated to integrate flawlessly with ADD winch mounts and frame-cut bumpers, plus their design sits atop welded steel mounting beams, which are beefy enough to allow for off-road use. ADD Offroad intercooler upgrade kits retain all OEM sensors and adaptive cruise control functions (adaptive cruise control relocation bracket may be included). Features include: * 8.5 percent more flow over the nearest competitor * Beefy steel mounting beam ready for any terrain * Optimized mount design for frame-cut and winch mount bumpers * 18-core main assembly * 100 percent TIG-welded
Not Yet Reviewed
$1,499.99
These Ford Performance Parts F-150 supercharger kits are designed to put approximately 160 hp and 160 ft.-lbs. of torque at the rear wheel. They feature an intercooled design, use the factory throttle body, and include a 95mm mass air meter. Ford Performance Parts F-150 supercharger kits include a Pro-Cal voucher to get your computer custom-calibrated.
( 1 )
$9,619.99
Vortech supercharger systems designed to increase horsepower and torque contain many high-performance components. Dipstick assemblies are one of these quality parts and are available in various degrees of tilt.
( 2 )
$72.99
Vortech supercharger systems are designed to increase horsepower and torque, thanks to their many high performance components. These air inlet ducts, for instance, provide clean and unrestricted airflow to the engine—and lowering charge air temperatures will substantially improve both performance and engine longevity. The inlet duct connections utilize heat-resistant silicon sleeves and premium-quality stainless steel clamps to keep your system running at peak efficiency.
( 1 )
$103.99
—
$283.99
Summit Bucks
Edelbrock E-Force Mustang Stage 1 Street Legal supercharger kits transform your Mustang into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 degrees of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. These Mustang supercharger systems are exclusively designed to provide instant, reliable and safe horsepower for a stock Mustang with low boost for minimum stress on the engine. They feature minimum air restriction in and out of the supercharger, along with individual long intake runners for maximum low end torque for great off throttle performance. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.
( 2 )
$6,567.26
—
$8,457.26
Unlock exhilarating performance from your 2022 Mustang with 750 horsepower and 670 lbs.-ft. of torque provided by the Roush 5.0L Mustang Phase 2 Supercharger kits! Building off the 5.0L V8 engine, the Roush Supercharger adds an impressive 300 hp and 260 lbs.-ft. of torque over the stock engine. Included in these Roush Supercharger kits is their high-capacity cooling technology with a full-face low temperature radiator. The larger low temperature radiator provides increased cooling capability, allows for greater power output, and delivers maximum performance. Compatible with both automatic and manual transmission vehicles, these Roush Supercharger kits feature Eaton's coveted TVS R2650 technology for increased power output throughout the rpm band and are engineered for durability with large bearing and timing gears. The 2022 Mustang Supercharger kit by Roush had to meet new Tier 3 Emissions Standards required on the base Mustang for this model year. Roush achieved this by incorporating a hydrocarbon trap in the air induction system as well as a unique calibration for the 2022 model year. Thanks to massive engineering efforts, they were able to maintain previous model year performance targets for power and torque. Because Roush is with you on this ride, their Supercharger kit includes the Roush's 3-year/36,000-mile Limited Powertrain Warranty when installed by an ASE certified technician. The Supercharger kit's calibration is optimized for 93-octane fuel but is also compatible with premium fuel. Product features and highlights: * Fits 2022 Mustang GT 5.0L V8 * Produces 750 horsepower and 670 lbs.-ft. of torque! * High-Capacity Cooling Technology with a full-face low temperature radiator * Compatible with both automatic and manual transmissions * Features Eaton's TVS R2650 technology for increased power output throughout the rpm band * Engineered for durability with large bearings and timing gears * Calibration optimized for 93 octane fuel, compatible with premium fuel * Includes all necessary installation hardware Note: Not compatible with Ford Mustang 5.0L equipped to meet Euro 6.2 emission standards. (Euro 6.2 dictates the use of particulate filters which are not compatible with the ROUSH Supercharger system). Not compatible with Mach 1, Bullitt, or GT350.
Not Yet Reviewed
$8,799.99
On Sale
Edelbrock E-Force universal supercharger systems are designed for engine swaps into street rods and muscle cars. They feature 12 in. long runners for maximum low-end torque and great drivability. They're capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than an Edelbrock E-Force universal supercharger system—exactly what you need for your engine swap project. Order the model recommended for your year/make and engine application. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
Not Yet Reviewed
$7,658.95
—
$8,766.95
$6,893.06
—
$7,890.26
On Sale
Do you need more power? Bolt on Edelbrock E-Force supercharger kits and give your stock F-150 a big boost of Edelbrock power. These systems are exclusively designed for each application and will allow you to increase your performance with impressive horsepower and torque. These 50-state legal systems feature an Eaton Gen VI supercharger rotating assembly seamlessly integrated into the intake manifold and uniquely oriented, allowing for amazing intake runner length and low-end torque. They're ideal for towing and off-road performance. Give your workhorse the boost it deserves--bolt on made-in-America Edelbrock E-Force supercharger kits.
( 5 )
$9,572.95
$7,163.06
—
$8,615.66
On Sale
Now you can get more power for your Pentastar equipped JK! These all-new Edelbrock E-Force Jeep Wrangler supercharger kits are designed exclusively for the Pentastar 3.6L V6 engine. They'll increase torque for improved towing and off-road performance when you need it the most, while retaining great daily driving manners. The superchargers have been designed from the ground-up, and utilize the Eaton Gen VI 1320 TVS rotor assembly for maximum efficiency in a compact package. The manifold assembly also features a dual-pass intercooler for reduced air temperature. Edelbrock E-Force Jeep Wrangler Supercharger Kits have great looks, as well, black powdercoated with machined highlights for durability and a unique appearance to give your engine compartment a distinctive look. Here are a few more Edelbrock E-Force Jeep Wrangler supercharger kit features: * Exclusive design fits under the stock hood * Bolt-on installation * Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required) * Electronic PCM programming module with application-specific tuning * Integrated bypass valve for minimal decrease in fuel economy
( 2 )
$8,025.95
$6,140.66
—
$8,347.95
You can transform your 2024 Ford Mustang into a true beast with Roush Phase 2 supercharger kits. Developed in partnership with Magnuson Superchargers and using Roush diagnostic tuning software for best-in-class calibration delivery and diagnostic capability, they unleash an extraordinary 810 hp and 630 lbs.-ft. of torque, propelling your driving experience to new heights. Each kit boasts a dual throttle body, front inlet, front drive, dual intercooled, inverted R2650 system with an 84mm pulley, peaking at 13 psi boost at 7,500 rpm. Revel in the unparalleled power, drivability, and performance that will make every drive an exhilarating experience. Features and benefits: * Dual front inlet, front drive, TVS R2650 supercharger with optimized, high flow inlet port for ultimate airflow capability * Unique Roush Red head unit * Reuses stock 80mm throttle bodies; retains symmetrical appearance and allows for reuse of stock induction components * Inverted design allows for large, high-efficiency, dual intercoolers for excellent heat transfer and lower intake air temperatures * High-flow, dual cone fuel injectors with optimized director plates for ideal injector targeting * Custom, billet fuel rails provide maximum flow with minimum restriction, while also ensuring correct injector orientation every time * Custom FEAD design and hardware allow for supercharger belt to run closer to the engine to reduce load on the crankshaft for ultimate reliability and durability * Large front heat exchanger provides the lowest possible intercooler temperatures while minimizing restriction to the stock cooling module; custom design for ease of installation--does not require removal of the vehicle fascia (less install time, less risk of damage) * Custom degas bottle provides huge volume and eliminates coolant aeration for ultimate cooling capacity * High-flow Bosch PCE intercooler pump * All hoses are custom formed for ultimate ease of installation and underhood appearance * Kit packages under the factory hood and K-brace with no modifications (K brace does not need to be removed for installation) * All wiring is plug-and-play * Colder heat range, reduced gap, high-quality Ford Performance spark plugs
Not Yet Reviewed
$9,995.00
Summit Bucks
ProCharger P-1SC-1 High Output supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. The extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. The supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 High Output kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your year/make/model.
Not Yet Reviewed
$7,799.00
—
$9,999.00
PowerMax Performance Diesel turbochargers supply your light-duty diesel with the best components for optimizing power, response, and efficiency. PowerMax turbochargers are quick-spooling, high-flowing turbochargers with the right blend of design features that will upgrade power and torque, while lowering EGTs for select diesel trucks. Whether you own a Ford, Dodge, or GM diesel pickup truck, PowerMax has a ball-bearing turbocharger for you! Turbocharger and installation instructions, as well as other components needed for your specific application are included. Features and benefits of PowerMax turbochargers: * Large bore inducer--allows greater airflow for high performance diesels with increased fuel flow * Advanced design compressor wheels--extremely high-efficiency, backward-curved impellers, which allow for a broad airflow range to match the needs of diesels * Exclusive true angular-contact ball bearings--meaning the turbo spools up to 15 percent faster, is capable of high-thrust loads seen in high performance/high-boost applications, and increases overall turbo efficiency by reducing power consumption by nearly 50 percent over traditional journal bearing designs * Performance enhancing oil restrictor--optimizes oil flow for proper lubrication and cooling, while limiting turbo rotational drag which robs power and efficiency * Divided turbine housing--divider wall within the turbine volute optimizes pulse gas energy, which gives greater response and turbine efficiency during low-end and mid-range operation * Ultra-high pressure/high-efficiency turbine--extracts a maximum of energy from the engine's exhaust. Using GMR235 super alloy, the turbine wheel design is optimized for high exhaust flow, and low weight to reduce moment of inertia assisting in crisp response to changes in engine speed * Turbine outlet connection--designed to fit as a direct drop-in to enhance the ease of upgrading stock turbos * Turbine heat shielding--PowerMax utilizes a heat shield to create "dead air space" insulation barrier to keep high exhaust heat energy in the turbine to be converted to mechanical energy, and away from bearings and oil * Design optimized turbine housing--advanced 3D modeling and computational fluid dynamics are used to optimize the volute shape, and the housing is also equipped with an adjustable wastegate allowing adjustment for optimum boost levels * Oil control and seal--a double-row flinger which drives drain oil away from the gas seal rings virtually eliminates compressor oil sealing problems
( 3 )
$2,219.99
—
$3,371.99
On Sale
Give your Ram truck more towing power with our new E-Force Stage 1 street legal supercharger systems. This complete supercharger system provides maximum flow, minimum temperature rise, quiet operation and reliability. It features minimum air restriction in and out of the supercharger for optimal flow and performance. The individual 7 in. long intake runners allow for maximum low end torque for towing and off-road applications while maintaining great daily driving manners.
( 4 )
$9,096.95
$8,187.26
—
$8,204.95
On Sale
Edelbrock E-Force Corvette C6 stage 1 street-legal supercharger kits are exclusively tailored to boost your performance. The unique features on these kits are 12 in. long intake runners that allow for maximum low-end torque. Plus, these Edelbrock E-Force street legal supercharger kits fit under the stock hood with no modifications.
( 3 )
$9,477.95
—
$10,215.95
$8,530.16
—
$9,194.36
On Sale
Edelbrock E-Force Colorado/Canyon Stage 1 street-legal supercharger kits are exclusively tailored to boost the performance of your popular midsized truck. If you opted for the "best in class" horsepower of the V6, but wish you had more towing capability and torque, these kits allow you to have the best of both worlds with 340 hp and 303 ft.-lbs. of torque. Each of these E-Force superchargers increases the V6's engine power output by 24 percent and are designed to fit under your stock Colorado/Canyon hood--with no modifications. Special features of these Edelbrock E-Force Stage 1 supercharger kits: * Eaton R1740 rotor assembly with an integrated air-to-water intercooler core and front-mount heat exchanger for low inlet air temperature and increased power * Durable black powdercoat finish that blends nicely into the engine compartment * Integrated bypass valve for maximum fuel efficiency * True bolt-on installation with no modification to stock hood or body * Self-contained oiling system with a 100,000 mile service interval * 3-year/36,000 mile powertrain warranty coverage, when applicable * Full-color step-by-step instructions
( 5 )
$6,152.95
—
$6,939.95
$5,537.66
—
$6,245.96
On Sale
Edelbrock E-Force Camaro V6 Stage 1 street legal supercharger kits are exclusively tailored to transform your Camaro into a force to be reckoned with! If you opted for the fuel efficiency of the V6, but wish you had more horsepower and torque, these kits allow you to have the best of both worlds—with 376 hp and 319 lbs.-ft. of torque at the rear wheels. The superchargers are available with or without a tune. Special product features: * Eaton R1740 rotor assembly with an integrated air-to-water intercooler core and front-mount heat exchanger for low inlet air temperature and increased power * Durable black powdercoat finish that blends nicely into the engine compartment * Integrated bypass valve for maximum fuel efficiency * True bolt-on installation with no modification to stock hood or body * Self-contained oiling system with a 100,000 mile service interval * 3-year/36,000 mile powertrain warranty coverage, when applicable * Full-color step-by-step instructions
( 1 )
$6,152.95
—
$7,042.95
$5,537.66
—
$6,338.66
On Sale
Does your HEMI equipped Challenger, Charger, Magnum, 300, or RAM Truck need more power? Then equip your ride with an Edelbrock E-Force Chrysler Stage 1 street legal supercharger system—the most efficient supercharger on the market for the popular Chrysler 5.7L, 6.1L, and 6.4L HEMI engines. These complete supercharger systems provide maximum flow, minimum temperature rise, quiet operation and reliability only the Edelbrock name can guarantee. They feature minimum air restriction in and out of the supercharger for optimal flow; and they include individual 7 in. long intake runners that allow for maximum low-end torque and great drivability. These systems are also available in a Stage 3 Pro Tuner system based on the Stage 1 system, but paired down to the essential components for your custom race builds. Order the model recommended for your application. Optional supplemental warranties are available (Stage 1 only) to give you peace of mind when installing an Edelbrock supercharger system on your brand new vehicle.
( 4 )
$9,189.95
—
$10,598.95
$8,270.96
—
$9,539.06
Mishimoto intercooler and pipe kits let your engine breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle just about anything. Mishimoto performance intercoolers offer increased core volume and fin surface area, which results in increased flow, reduced outlet temperatures, and the ability to generate gains in horsepower and torque. Intercoolers are available in black or silver. Pipes are available polished or with a black powdercoat. As with all their products, the Mishimoto intercooler and pipe kits are backed by their signature Mishimoto Lifetime Warranty.
Not Yet Reviewed
$542.95
—
$2,400.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
