Availability
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because of their relationship to engine speed, superchargers commonly provide a power curve that increases with engine rpm, delivering boost with rapid response.
There are two main styles of superchargers: Roots and centrifugal. Roots-style superchargers use a pair of rotors within a housing to force air at higher than atmospheric pressure into your engines. The rotors can have a varying number of lobes and may be twisted, affecting how the air flows through the supercharger. Centrifugal style superchargers utilize a gearbox to spin a shaft, which is connected to compressor wheel, drawing in ambient air and compressing it on its way to the engine.
Turbochargers utilize the exhaust gases produced by your engine to spin a turbine wheel located inside the turbocharger housing, which is connected to a compressor wheel by a shaft. As the two wheels turn, ambient air is sucked into the turbocharger’s compressor inlet and pushed into the engine. That air charge is often passed through an intercooler to increase its density.
Choosing the right turbocharger kit for your vehicle can be daunting, with factors like tubing size, A/R ratio, and multiple other factors to consider. However, Summit Racing makes it easy by offering turbocharger kits custom-designed for a wide range of vehicles, so you can get all the benefits without major engineering work.
For even more helpful information about the difference between superchargers and turbochargers, check out this helpful article at OnAllCylinders.com.
Summit Racing has everything you need to take your engine’s performance to the next level with a complete supercharger or turbocharger kit. If you’re looking for a complete, pre-designed, bolt-on solution, we’ve got you covered. But if you want to take the plunge into every aspect of blow off valves, wastegates, piping, intercoolers, boost controllers, and more, we can help you there, too. Summit Racing only carries quality parts from trusted brands like Precision, Garrett, Turbosmart, Turbonetics, Edelbrock, Magnuson, ProCharger, and more, so you can complete your supercharger or turbocharger build with confidence.
Turbosmart boost controller accessory components feature a 10 ampere accessories switch called the rocket launcher switch. They work with all single and dual-stage manual boost controllers and are made of high-quality steel with a red plastic cover over the switch. Turbosmart is a recognized brand in over 50 countries around the world. So, if you're looking for any boost controller accessory components, you know where to go.
Not Yet Reviewed
$13.95
The G-Force III is the latest iteration of Go Fast Bits' feature-packed electronic boost controller—now with the ability to monitor and display your engine's air/fuel ratio in either Lambda or AFR. By connecting the analog output of most wideband oxygen controllers (i.e. Innovate LC-2, AEM UEGO etc.; sold separately) to the G-Force III's auxiliary input, you can toggle between boost pressure and air/fuel ratio display. This saves you from having to install a separate AFR gauge in your car, and it can also save your engine! A lean mixture at high boost can destroy an engine in seconds, and a stand-alone AFR gauge is next to useless when accelerating hard, as your concentration is likely to be on the road in front of you. The G-Force III safeguards your engine against a lean mixture by lowering boost to the minimum setting, and visibly warning you by flashing the display lighting. Whether your car is a daily driver or an all-out track weapon, the G-Force III has the features to tailor boost to suit your needs. Set up to six boost presets and select on the fly; use the scramble feature for overtaking, launching, towing, or protecting the engine—and you can even customize the lighting color to suit your interior! No other EBC on the market offers the features, control, ease of use, and value for money like the G-Force III! Additional G-Force III electronic boost controller details: * For boost pressures up to 50 psi (3.45 bar, 345 KPA) * Adjust peak boost, rise rate, and closed loop correction. * Display boost pressure in PSI, BAR, or KPA * 6 Boost presets, individually programmable * Unique "scramble" feature with remote switching * Peak boost recall * Air/fuel ratio display in AFR or Lambda (when connected to a wideband oxygen controller) * Separately adjustable overboost and lean mixture warning/boost cut * Touch buttons with user selectable illumination colors * Auxiliary input to switch boost presets or activate scramble * 1/2 DIN size casing, fits standard stereo slot * Supplied with MAC 3-port solenoid
( 1 )
$396.00
Vibrant Performance turbo adapter kits transition your setup from a 4-bolt to V-band. With precision laser-cut and CNC-machined pieces, these kits allow you to make the switch with rust-free, warp-free T304 stainless steel. Vibrant turbo adapter kits include: * 3 in. female V-band flange * 3 in. 4-bolt flange * V-band clamp * Hardware, which includes four nuts and four bolts
Not Yet Reviewed
$39.99
Get double the adjustment with Turbosmart dual stage boost controllers! You'll have fast boost response and two adjustable boost levels, plus the best bang for your buck in horsepower upgrades! Turbosmart dual stage boost controllers are built for precision and durability from high-grade brass and billet aluminum. They offer a robust design and a detent adjustment system for accurate and simple boost tuning. They also include a Rocket Launcher switch to toggle between high and low boost on the fly! These manual boost controllers are ideal for mildly modified turbocharged engines and are perfect for increasing boost levels on factory turbo cars and engines. Control the boost on two levels with Turbosmart dual stage boost controllers.
( 1 )
$272.95
Go Fast Bits SXV blow-off valves are designed to ensure the ultimate reliability, performance, and boost holding. Featuring a 25mm inlet and outlet, the SXV is the perfect valve to replace the plastic OEM bypass/diverter valve or integrate into a turbo system that didn't previously have a valve. Plastic hose-mounted OEM bypass valves are very common, as are the reliability issues they suffer from cracked plastic and diaphragm failures that result in significant boost loss and poor performance. A significantly leaking OEM valve can also accelerate wear or even damage the turbo from over speeding. These SXV blow-off valves utilizes an uncompromising approach to their design and materials to ensure all your hard-earned boost gets to the engine, so the turbo doesn't work harder than it needs to. Deliver your turbos' full potential with the use of these SXV blow-off valves featured from Go Fast Bits! Product Overview: * Precision CNC-machined components for rugged reliability * Viton piston seal for the ultimate boost holding * The operation of the SXV is designed to offer the best possible throttle * An OEM bypass/diverter valve is open until it needs to close—increases turbo lag * An SXV is closed until it needs to open—minimizes turbo lag * By venting only, when necessary, the SXV eliminates the additional lag imposed by the OEM valve, resulting in the best throttle response your turbo system is capable of delivering. * Switch out your OEM valve for an SXV for the ultimate reliability and throttle response, with the peace of mind of Go Fast Bits lifetime warranty!
Not Yet Reviewed
$171.00
Clearance
Garrett turbine housings can restore the efficiency of your turbo. When your housing shows signs of wear and tear, to avoid damage to other turbocharger components and loss of performance, replace it. Garrett offers a considerable selection of turbine housings in different volute types, materials—and in a variety of A/R and flange configurations to effectively direct exhaust gases into the wheel to gain the performance you desire. Whether you're replacing or upgrading, switching inlet/outlet options or changing A/R sizing, you can count of Garrett turbine housings to assist with your engine-boosting power project.
Not Yet Reviewed
$1,156.99
$354.99
—
$933.03
Go Fast Bits D-Force Diesel Electronic Boost Controllers are the perfect partner for all turbo diesel engines that use a pneumatic wastegate. With six boost presets and a timed scramble feature that can be selected on-the-fly, the D-Force can adjust your boost for all driving conditions—such as overtaking, towing, economy, racing, or even protecting the engine. As any modified turbo diesel owner knows, it's important to monitor EGT (Exhaust Gas Temperature) to avoid costly engine damage. Not only can the D-Force control your boost, but it can also display EGT! No other EBC offers the features, control, and ease of use like the D-Force. Order the D-Force with or without an EGT sensor. Additional details: D-FORCE GIVES YOU ULTIMATE CONTROL OF YOUR BOOST PRESSURE! Want to adjust boost for towing? Change it if EGT gets too high? Have multiple settings for different driving conditions? Bring boost on earlier or hold it longer? The D-Force can do all of this and more! Using a unique boost control strategy, D-Force lets you adjust the boost rise rate, peak boost, and closed-loop correction. There are six boost presets (plus an extra one dedicated to the scramble feature) that you can set up with different boost parameters for different driving conditions, and then activate them on-the-fly or at the press of a button. The unique scramble feature can be set up for a variety of purposes. It can raise or lower boost when activated with the screen button, or via the auxiliary input using a switch, button, or ECU output. For example, you could use it to lower boost pressure for safety by connecting it to an existing warning light, or instantly access high boost by pressing a button or flipping a switch. * The D-Force can also display Exhaust Gas Temperature and has a user-adjustable warning. This feature requires the EGT plug-in module, which includes a stainless steel EGT probe and weld-on exhaust bung, along with the module to connect it to the D-Force wiring loom. The D-Force kit is available with or without the EGT plug-in module, and the module is also available separately. * The controller interface is easy to use with touch-buttons and one-touch menu navigation. The boost pressure units can be displayed in psi, bar, kPa—and the peak recall feature lets you see your peak boost after each boost event. * 50 psi capability! * Closed-loop boost control strategy—for the fastest possible boost rise rate and minimum drop off at high RPM, the adjustable closed-loop logic helps prevent boost variations that can occur in different gears, RPM ranges, and atmospheric conditions. * Remote input trigger: Connect the remote input wire to a switch, button, warning light or ECU output to change boost presets or activate scramble boost. * Over-boost warning/cut: User adjustable warning to indicate if the boost pressure is too high and to cut the solenoid to lower boost and protect the engine. * Touch screen interface with simple menu navigation: Capacitive touch screen and single-touch menu navigation makes setup exceptionally easy. Scrolling text also means you always know where you are in the menu. * Choose your screen color: You can set the button illumination to any one of six different colors to match your car's dash.
Not Yet Reviewed
$396.00
—
$513.00
Manufacturer Rebate
Putting together the most advanced feature sets ever seen in boost controllers, AutoMeter has redefined the category. These AutoMeter electronic boost controllers are packaged in a familiar and easy-to-install 2 1/16 in. gauge housing. They offer some of the most powerful functions ever assembled for safely extracting the most performance possible from your forced-induction application, and the level of precision, response, and durability that racers have come to trust within the AutoMeter performance instrument range. Intuitive programming menus operated right through the controllers (no separate software or interface modules are required) make setup and use incredibly easy. Power is nothing without control. They are specifically designed for turbocharged gasoline engine combinations running up to 30 psi of boost pressure. AutoMeter electronic boost controllers feature: * High/low boost modes: pre-program and set two different configurable boost settings that can be switched between on-the-fly with the push of a button, perfect for performance track day cars and racing applications * Boost by rpm/boost by gear: integrating AutoMeter's most advanced digital tachometer circuit, your boost curve can be tuned precisely by 500 rpm increments to minimize wheel spin and put more power to the ground * One-touch gear capture: instantly capture each gear with the push of a button; drive normally in your chosen gear and hit the capture button * Peak boost recall: one-touch recall of the highest boost pressure achieved during a given time * Configurable warnings with overboost protection: easy-to-set parameters provide a full face flashing warning if boost pressure moves beyond your settings to quickly alert the driver. The warning doubles in speed if boost pressures exceed your programmed settings by 2 psi or more * Pro control output: using your programmed high and low boost settings, the AutoMeter boost controllers can automatically trigger external devices such as water methanol injection, intercooler sprayers, nitrous solenoids, or other devices that can be activated via relay * Pro control input: can also be controlled by external devices, any ground signal sent to the pro control input will immediately back boost levels down wastegate spring pressure * Display: highly versatile boost pressure reading units represented on the digital LED display can be selected via the user button interface * Data logger output: configurable scale 0-5v analog voltage output in either PSIA or PSIG allows for signal sharing/boost readings with other performance electronics, such as data acquisition systems or engine control units * Tach/speed signal diagnostic: onboard real-time diagnostics to verify the presence and correct operation of both of these inputs
Not Yet Reviewed
$473.99
—
$509.99
Magnuson M.O.A.B Mother of All Blowers superchargers blend the iconic style of traditional roots blowers first popularized by hot-rodders in the 1940s with advanced TVS3100 rotor technology. Unlike older blowers plagued by poor idle quality, aggressive underdrive ratios, and low boost to mask their inefficiencies, Magnuson M.O.A.B.s feature high-efficiency 3.1L rotors with a full 140-degree twist, delivering significantly greater horsepower, torque, and instant throttle response. Paired with Magnuson's vacuum-operated bypass valve, the Mother of All Blowers superchargers generate substantially more power with dramatically improved efficiency, reduced parasitic drag, and lower operating temperatures. Direct bolt-on compatibility with standard roots manifolds and accessories ensures easy upgrades for your street rod, LS restomod, or classic muscle project. Select cartridge assembly length needed and finish desired. Flip the switch, drop the pedal, and feel the blast--the M.O.A.B. has landed. Features and benefits: * Retain the iconic look of your vintage blower, powered by technology that reduces heat and frees up horsepower for your engine * Direct bolt-on installation for standard 6-71 and 8-71 blower manifolds--no adapters required * Fully compatible with standard roots blower accessories including cog belt drives, intercoolers, carburetors, EFI systems, fuel components, and intake hardware * Modern TVS3100 rotor design improves airflow efficiency, reduces intake temperatures, and provides smoother boost response compared to traditional roots rotors * Integrated vacuum-operated bypass valve reduces parasitic load, enhancing drivability and fuel efficiency at idle and part-throttle * Custom-engineered front gear cover featuring increased oil capacity for improved durability and cooler gear-case temperatures * Standardized inlet/outlet flanges simplify integration with existing aftermarket kits and common blower accessories * Multiple billet aluminum drive snout lengths available (3.90 in. to 7.90 in.) for easy belt alignment with virtually any 6-71/8-71 style drive configuration * Bolt-on pulley hubs utilize industry-standard 6-bolt cog pulleys for flexible drive ratio adjustments * Self-contained, maintenance-free design with no external oil lines or regular servicing required * Designed for versatile compatibility across vintage and modern engine platforms including Chevy, Ford, Mopar, LS-series engines, and more * Available polished or with black finish
Not Yet Reviewed
$4,615.00
—
$4,915.00
Considering a performance turbo or exhaust brake? BD Diesel Howler Stock VGT turbo kits provides the drivability a modern variable geometry turbocharger and a strong exhaust brake that generates up to 65 psi EBP across a wide rpm band. The kits come with a full install kit, including turbo, BD manifold, plug-and-play controller kit, and all necessary fittings for a straightforward installation. Features include: * Integrated exhaust brake control with toggle switch * High-performance thick-walled exhaust manifold included * Faster spool up than conventional turbo * VSR high-speed balanced * Plug-and-play VGT controller kit with wiring harness * Control module monitors sensor inputs and controls vanes for optimal spool up * Turbocharger wheel speed control prevents overspeed * Commanded boost based on throttle position to maximize cruising fuel economy * Built-in safety defaults the vanes open if erroneous sensor data received * All necessary hardware to install * Factory looking fit and finish * Does not need OBD port connection * No core charge
Not Yet Reviewed
$2,812.00
Considering a performance turbo or exhaust brake? BD Diesel Howler Performance VGT turbo kits provides the drivability of a modern variable geometry turbocharger and a strong exhaust brake that generates up to 65 psi EBP across a wide rpm band. The kits come with a full install kit, including turbo, BD manifold, plug-and-play controller kit, and all necessary fittings for a straightforward installation. Features include: * Can support up to 675 hp at crank with additional performance mods * Utilizes a brand new Holset VGT actuator * Ballistic 64.5mm 7+7 blade compressor wheel and 70mm 12-blade turbine * Integrated exhaust brake control with toggle switch * High-performance thick-walled exhaust manifold included * Faster spool up than conventional turbo * VSR high-speed balanced * Plug-and-play VGT controller kit with wiring harness * Control module monitors sensor inputs and controls vanes for optimal spool up * Turbocharger wheel speed control prevents overspeed * Commanded boost based on throttle position to maximize cruising fuel economy * Built-in safety defaults the vanes open if erroneous sensor data received * All necessary hardware to install * Factory looking fit and finish * Does not need OBD port connection * No core charge
Not Yet Reviewed
$3,953.00
In this day and age of computer-controlled vehicles, an improperly functioning sensor or switch could cause major issues. Dorman turbocharger speed sensors help prevent damage to the engine and turbo. These plastic, copper, and metal constructed units feature an easy plug-and-play installation and have been pre-fitted to ensure that standards for quality are met. Dorman Turbocharger speed sensors keep speed readings and performance at optimum levels.
Not Yet Reviewed
$203.99
—
$270.99
These Turbosmart e-Boost 2 boost controller accessories have all been engineered to help you use the e-Boost 2 boost controller with ease. The Turbosmart e-Boost 2 boost controller is a complete boost management system with state-of-the-art software. Get your Turbosmart e-Boost 2 boost controller accessories for the one thing every turbocharged car owner should have.
Not Yet Reviewed
$51.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
