Availability
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because of their relationship to engine speed, superchargers commonly provide a power curve that increases with engine rpm, delivering boost with rapid response.
There are two main styles of superchargers: Roots and centrifugal. Roots-style superchargers use a pair of rotors within a housing to force air at higher than atmospheric pressure into your engines. The rotors can have a varying number of lobes and may be twisted, affecting how the air flows through the supercharger. Centrifugal style superchargers utilize a gearbox to spin a shaft, which is connected to compressor wheel, drawing in ambient air and compressing it on its way to the engine.
Turbochargers utilize the exhaust gases produced by your engine to spin a turbine wheel located inside the turbocharger housing, which is connected to a compressor wheel by a shaft. As the two wheels turn, ambient air is sucked into the turbocharger’s compressor inlet and pushed into the engine. That air charge is often passed through an intercooler to increase its density.
Choosing the right turbocharger kit for your vehicle can be daunting, with factors like tubing size, A/R ratio, and multiple other factors to consider. However, Summit Racing makes it easy by offering turbocharger kits custom-designed for a wide range of vehicles, so you can get all the benefits without major engineering work.
For even more helpful information about the difference between superchargers and turbochargers, check out this helpful article at OnAllCylinders.com.
Summit Racing has everything you need to take your engine’s performance to the next level with a complete supercharger or turbocharger kit. If you’re looking for a complete, pre-designed, bolt-on solution, we’ve got you covered. But if you want to take the plunge into every aspect of blow off valves, wastegates, piping, intercoolers, boost controllers, and more, we can help you there, too. Summit Racing only carries quality parts from trusted brands like Precision, Garrett, Turbosmart, Turbonetics, Edelbrock, Magnuson, ProCharger, and more, so you can complete your supercharger or turbocharger build with confidence.
Showing In Stock Items. Show All 184 Items.
Every project is a little bit different and sometimes, off-the-shelf parts just won't cut it. Custom fabrication is the name of the game, and whether you're building an off-the-wall ride, swapping a huge motor into a tiny car, or whatever else your imagination can come up with, Mishimoto has created an intercooler mounting hardware kit for those occasions. Mishimoto's hardware kit includes four stainless steel bolts, four rubber bushings, and four bushing inserts to allow you to utilize a rubber bushing mounting setup, even with your custom mounting brackets. These kits will fit with their M-Line, R-Line, S-Line, and G-Line universal intercoolers. And, of course, they include their signature Mishimoto Lifetime Warranty.
Not Yet Reviewed
$30.95
Get that intercooler mounted securely with our Summit Racing™ intercooler mounting bracket kits. They provide you with all the brackets and hardware necessary to add or upgrade your intercooler, giving you all the horsepower you're looking to build. Choose the version that fits your application.
Not Yet Reviewed
$149.99
Vortech offers these replacement supercharger mounting brackets to fit your specific application. They are manufactured from aluminum and include the necessary mounting hardware to complete the installation. Don't worry about cracked or warped brackets anymore--these Vortech replacement supercharger mounting brackets will keep your supercharger operating correctly.
( 7 )
$567.99
Vibrant Performance intercooler mounting brackets are crafted from T304 stainless steel. They come as a pair assembled with required hardware. Vibrant bracket assemblies bolt on to the intercooler end tanks to make mounting your intercooler significantly easier. Order the parts designed for your particular intercooler model.
Not Yet Reviewed
$26.99
The right brackets for the right performance--Vortech accessory tensioner mounting brackets. Belt tensioners are an important component in the operation of your supercharger drive system. And, bent or misaligned mounting brackets may be the culprits for abnormal belt tracking on your tensioner pulley. Get the proper fit and function, plus avoid problems and poor performance with Vortech accessory tensioner mounting brackets.
( 5 )
$76.94
—
$94.99
Save time and money with one of these mounting hardware kits, complete with flat head style screws, spacers, washers, and clips. Vortech mounting kits come with all necessary hardware for the installation of any style of rear valance for specified Mustangs. Vortech mounting hardware kits for 5.0L Mustangs do not include the mounting plate.
( 3 )
$75.04
Clearance
TurboXS front mount intercoolers give you the massive flow and cooling that you need for your turbo to achieve peak performance. They dwarf the factory intercooler core, offering more than 3 times the volume. Not only is their bar and plate core larger, they're also less restrictive at high-flow rates, resulting in superior cooling and performance. Unlike other aftermarket front mount intercoolers, they allow you to keep factory features and fitment. If you're in the market to increase the performance of your turbo, there's no better way to do it than with TurboXS front mount intercoolers!
Not Yet Reviewed
$1,478.87
$1,109.50
Efficiency is the name of the game and the COBB Tuning front mount intercooler cores are a winner! They will allow you to get the most out of your stock turbo—and still have plenty left over for future upgrades to go along with it. COBB units are a larger volume, larger core unit that will help reduce intake charge temperatures, especially if you're making more power from the factory. Plus, these intercoolers are a direct drop-in core that arrives ready to install to run with factory intercooler plumbing. If you're looking for an effective solution to eliminate inconsistent power delivery from your turbocharged vehicle, look no further than the all new COBB Tuning front mount intercooler cores! Additional COBB front mount intercooler core features include: * Larger size, front mount intercooler made from high-grade aluminum in choice of black or silver finish * Unique, custom designed fin within the "hot side" endtank helps to evenly disperse incoming air across the entire core * Easiest way to drastically improve power when coupled with tuning from the V3 Accessport * Bar and plate structure * Cast end tanks with the COBB logo * 4-ply black silicone couplers and worm clamps ensure a leak-free connection to the factory charge pipes * No cutting or fabrication required for installation
Not Yet Reviewed
$1,045.00
—
$1,150.00
Fathouse Performance boost leash controller mounts are designed specifically for the S550 Mustangs. Crafted from durable PETG material, these innovative mounts boast a 3D printed composition that won't deform with the heat, ensuring strength and longevity to stand up to the rigors of performance driving. This meticulously designed performance accessory includes mounting hardware and the hardware to mount the Fathouse boost leash controller to the mount (the boost leash controller is sold separately).
Not Yet Reviewed
$44.99
Engineered specifically for all 2015-2023 Mustang models, the Fathouse GFB boost controller mounts are the perfect solution for drivers looking to enhance their vehicle's turbo system with a reliable, easy-to-install mount that maintains a clean and organized engine bay. Crafted from durable PETG material, these mounts boast a 3D printed composition that's durable, ensuring strength and longevity to stand up to the rigors of performance driving. Optimize your Mustang's turbo setup with the GFB boost controller mounts—a meticulously designed accessory for precise boost control management. The mount comes with necessary hardware and double-side adhesive to mount a Go Fast Bits boost electronic controller (not included).
Not Yet Reviewed
$44.99
COBB Tuning front mount intercooler kits replace your overworked stock units to deliver a drastic increase in cooling and power, especially when paired with tuning from Accessport (not included). Available for several applications, most of these kits feature larger cores with efficient bar and plate designs and cast aluminum end tanks, piping, and more (depending on your application). Escalating intake air temperatures under the hood can overwhelm your factory FMIC with heatsoak and take away power. Put one of these COBB Tuning front mount intercooler kits near the top of your modification list and make your car come alive with new found colder air charge.
Not Yet Reviewed
$1,070.00
—
$1,675.00
Motorcraft turbocharger mount pedestals are manufactured from first-quality materials, chosen specifically for their integrity, durability, application suitability for maximum performance. Motorcraft incorporates new innovations or improvements in their aftermarket replacement parts for a sure fit and easy installation. Features and benefits: * Only parts recommended by Ford Motor Company for Ford and Lincoln vehicles * All components engineered to tight tolerances to help provide excellent performance * Motorcraft service parts warranty offers 2 years, unlimited mileage, limited labor cost and no commercial exceptions * Warranty supported nationwide by Ford and Lincoln dealers and Ford Authorized Distributors
Not Yet Reviewed
$1,061.99
CSF heat exchangers offer larger cores with greater cooling capacity. They feature their exclusive "B-Tube" technology--lighter, thinner aluminum material carefully formed in a "B" and brazed over the seam to seal. The design is stronger and offers better cooling efficiency than traditional "O" shaped tubes. With great power comes great heat. Cool your power with CSF heat exchangers. Features include: * Dual-pass flow structure allows the coolant to flow across the core of the radiator twice before exiting the radiator, for the lowest outlet temperature possible (OEM-style design) * CNC-machined, OEM-style "quick-connect" inlet/outlet connections * CNC-machined, OEM-style mounting brackets and fittings for superb fit and durability * Includes removable aluminum rock guard * All-aluminum race-style drain plug * Drop-in fit requires no modifications to install--accepts all attaching OEM components, including "quick-connect" hoses, mounting brackets, OEM X-brace, and all air ducting/shrouding. * Lifetime warranty
( 1 )
$399.00
—
$699.00
Magnuson heat exchangers and intercoolers are designed to keep your supercharged engine working at optimum temperature levels. A cooler intake charge means more power from your engine. These units are made from aluminum and are precision-welded for maximum efficiency and durability.
Not Yet Reviewed
$597.00
Wagner Tuning competition intercoolers replace your OEM unit with performance gains and low intake temperatures. Optimized by CAD, most feature lightweight, low restriction tube and fin construction, with a competition high-speed core and cast aluminum end tanks to give these intercoolers excellent cooling properties with less pressure drop. The design was improved further with flow analyses and simulations. Wagner Tuning competition intercoolers deliver an easy fitment and maximized cooling. They are treated with a protective anti-corrosion coating with perfect thermal heat-dissipating characteristics. Order the model designed for your vehicle application.
Not Yet Reviewed
$1,040.00
—
$2,490.00
Replace the plastic with fabricated Fathouse Performance supercharger coolant reservoirs. These lightweight, powdercoated units feature a smooth radius design, are engineered to work the OEM vented coolant cap, and are easy to install utilizing the OEM mounting location and lines. Select one for your vehicle.
Not Yet Reviewed
$249.99
On Sale
APR intercooler systems result in repeatable performance—even in the most demanding of situations. These massive front-mounted upgrades dramatically reduce intake air temperature (IAT), minimize heat soak, and provide increased performance in easy-to-install, direct bolt-on designs. The superior effectiveness and performance of APR systems is focused around core selection, end tank design, and specific install location for each application. Balancing all the necessary characteristics, APR's engineers perfected units with exceptional cooling and lowered pressure loss across the core, while maintaining critical airflow to components behind the system—delivering maximum performance and far exceeding the capabilities of factory intercoolers. Features may include: * Aluminum construction * Large bar-and-plate design with densely packed staggered and louvered fins * Smooth cast aluminum end tanks engineered for low turbulence/restriction and maximum flow * Pressure tested to prevent power robbing boost leaks * Full directions and APR world-renowned customer support * Some systems may include CNC-bent and TIG-welded mounting brackets, high-quality multi-ply silicone inlet and outlet hoses, T-bolt clamps, and billet MAP sensor housings
Not Yet Reviewed
$2,199.95
$898.95
—
$1,978.95
Summit Racing™ Extreme Duty fasteners are stud and bolt kits engineered to withstand the stress and abuses that high-horsepower engines endure. These kits come with all necessary studs, nuts, washers, lubricant, and instructions to ensure maximum performance and reliability. Extreme Duty fasteners feature: * High-strength chromoly steel utilized for all products * Precision manufacturing processes ensure consistent product performance * All studs are twice straightened to guarantee straightness * Threads are rolled after heat treatment for high strength * Tensile and yield strength tested after thread rolling * Uniformly applied black oxide surface finish * Anti-rust oil coating to protect fasteners from corrosion
Not Yet Reviewed
$47.99
You're in the driver seat for boost control with Turbosmart! Their in-cabin boost controllers provide enthusiasts like you with boost adjustment on the run! Turbosmart manual boost controllers are manufactured from high-grade brass and aluminum, easy to install, and offer the most cost-effective way of controlling the amount of pressure going to your wastegate. In-cabin controllers feature a detent system for ease of adjustment and a gated system to bring the boost on faster. Turbosmart in-cabin boost controllers are strong, lightweight, and they put you in control from the driver seat of your turbo machine.
Not Yet Reviewed
$138.99
—
$145.95
Vortech supercharger systems designed to increase horsepower and torque contain many high-performance components. Dipstick assemblies are one of these quality parts and are available in various degrees of tilt.
( 2 )
$72.99
These Turbosmart blow-off valve flanges are manufactured with state-of-the-art machines and are made of superior-quality materials. Turbosmart has always been focused on one thing, and one thing only--high performance. Their products are distributed in over 50 countries. These blow-off valve flanges can be found in many world-record breaking vehicles, which makes them a testament to Turbosmart's achievements.
( 5 )
$25.95
Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!
( 2 )
$375.95
—
$2,055.95
COBB Tuning upgraded intercoolers are an easy way to deliver a drastic increase in cooling and power, especially when paired with tuning from Accessport (not included). Even when stock, the factory FMIC can be overwhelmed with heatsoak. COBB intercoolers feature larger cores, cast aluminum end tanks, and other design improvements to deliver increased cooling efficiency—and that means more power. Plus, since they require no modifications, your install is easier, too.
Not Yet Reviewed
$740.00
—
$1,045.00
Edelbrock E-Force Competition supercharger pulleys are required for the installation of E-Force supercharger kits. They're available in a choice of sizes for fine-tuning airflow for your specific needs.
( 9 )
$61.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
