Availability
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because of their relationship to engine speed, superchargers commonly provide a power curve that increases with engine rpm, delivering boost with rapid response.
There are two main styles of superchargers: Roots and centrifugal. Roots-style superchargers use a pair of rotors within a housing to force air at higher than atmospheric pressure into your engines. The rotors can have a varying number of lobes and may be twisted, affecting how the air flows through the supercharger. Centrifugal style superchargers utilize a gearbox to spin a shaft, which is connected to compressor wheel, drawing in ambient air and compressing it on its way to the engine.
Turbochargers utilize the exhaust gases produced by your engine to spin a turbine wheel located inside the turbocharger housing, which is connected to a compressor wheel by a shaft. As the two wheels turn, ambient air is sucked into the turbocharger’s compressor inlet and pushed into the engine. That air charge is often passed through an intercooler to increase its density.
Choosing the right turbocharger kit for your vehicle can be daunting, with factors like tubing size, A/R ratio, and multiple other factors to consider. However, Summit Racing makes it easy by offering turbocharger kits custom-designed for a wide range of vehicles, so you can get all the benefits without major engineering work.
For even more helpful information about the difference between superchargers and turbochargers, check out this helpful article at OnAllCylinders.com.
Summit Racing has everything you need to take your engine’s performance to the next level with a complete supercharger or turbocharger kit. If you’re looking for a complete, pre-designed, bolt-on solution, we’ve got you covered. But if you want to take the plunge into every aspect of blow off valves, wastegates, piping, intercoolers, boost controllers, and more, we can help you there, too. Summit Racing only carries quality parts from trusted brands like Precision, Garrett, Turbosmart, Turbonetics, Edelbrock, Magnuson, ProCharger, and more, so you can complete your supercharger or turbocharger build with confidence.
Showing In Stock Items. Show All 760 Items.
ATS Diesel Performance electronic fuel regulators are designed to allow you to utilize your turbochargers full potential without the truck's computer reducing fuel when it gets that extra boost you've been looking for. They will allow higher boost pressures while maintaining the factory fuel pressures. This is essential when doing any turbo modifications. When the turbo produces boost pressure over stock, the engine will then reduce fuel.
( 4 )
$69.76
Aeromotive offers fuel pressure regulator adapters for a variety of applications, including Gen 4 Camaro 4 Bar/58 psi pressure regulators ONLY on Gen5/6 Camaro SS fuel modules. They also fit Gen 6 Camaro and CTS-V3 (2015+) fuel modules. These aluminum adapters include a black anodized finish—and are machined in accordance with factory specifications to ensure proper fitment and long-lasting performance.
Not Yet Reviewed
$15.95
These Turbosmart FCD-2 electronic boost fuel cut adjusters are designed to alter the output of a factory 5 V MAP sensor or AFM at an adjustable level to accurately raise the factory fuel cut point. They feature LED indicators for an easy setup and have an adjustable release, ensuring that you retain the safety of having a fuel cut to protect your engine from over-boosting. The Turbosmart FCD-2 electronic boost fuel cut adjusters are suitable for most turbocharged cars and are designed to be used in conjunction with a Turbosmart boost controller.
Not Yet Reviewed
$190.95
Rhodes Race Cars water/ice tank and Pro Series fuel cell combos are made specifically to support today's high-horsepower turbo/supercharged vehicles with air-to-water intercooled systems, as well as satisfying the thirst for today's larger fuel systems. Every tank is crafted from .100 in. thick 5051 aircraft aluminum alloy for the best in corrosion protection and to ensure the best quality material and craftsmanship goes into every fuel cell they produce. Select the model designed for your application needs. Rhodes Race Cars fuel cell combo tank features: * -12 AN feed, -10 AN vent, and -8 AN return for fuel cell * 8 1/4 in. opening cap for water/ice tank * 1 in. NPT coupler fittings for feed and return to help with internal pump mounting * 1/2 in. NPT vent and drain fittings * Mounting plate installed for Rule 2000 and 3700 pump mounting * Electrical connections installed for internal pumps * Mounting tabs for ease of installation
( 2 )
$424.95
—
$674.95
RCI air/ice fuel cooler tanks lower fuel temperatures by over 40 percent! They feature TIG-welded 5052 aircraft aluminum alloy construction with 12-bolt heavy-duty aircraft-style, flush-mount lid assemblies. Available in 4- and 5-gallon capacities, the cooler tanks may be chosen with a red, blue, or black powdercoating, or with a natural finish. Choose the tank size and finish preferred for your vehicle. Features and benefits: * Built-in 1/2 in. tubing coil * Circulates ice cold fuel in/out of tank * Fitted with ports, rollover vent, and drain * Electrical wire pass through connector * Works with external water pump to air intercooler * Works with Internal Rule 2000 water pump to air intercooler * Built-in mounting bracket for Rule 2000 water pump Note: Water pump or water pump hose is NOT included.
Not Yet Reviewed
$231.99
—
$262.99
RCI air/ice fuel cooler and fuel cell combos feature TIG-welded 5052 aircraft aluminum alloy construction with 12-bolt heavy-duty aircraft-style, flush-mount lid assemblies. Available in 4- and 5-gallon capacities, the cooler and cell combo may be chosen with a red, blue, or black powdercoating, or with a natural finish. Choose the combo size and finish preferred for your vehicle. Features and benefits: * Lowers temperature by over 40 percent * Built-in 1/2 in. tubing coil * Circulates ice cold fuel in/out of tank * Fitted with ports, rollover vent, and drain * Electrical wire pass through connector * Works with external water pump to air intercooler * Works with Internal Rule 2000 water pump to air intercooler * Built-in mounting bracket for Rule 2000 water pump * 4-gallon fuel cell has pickup on bottom rear of cell * 5-gallon fuel cell has pickup on 2 in. sump on bottom of cell Note: Water pump or water pump hose is NOT included.
Not Yet Reviewed
$401.99
—
$462.99
Summit Racing™ mechanical wastegates are constructed of cast stainless steel and 6061 aluminum with a black anodized finish. These valves control the flow of exhaust gases to the turbine wheel in a turbocharged engine system. Their primary function is to regulate the maximum boost pressure in turbocharger systems, to protect the engine and the turbocharger. Order the relief diameter preferred for your application.
( 28 )
$100.99
—
$179.99
Summit Racing™ 50MM blow-off valves are a pressure release system that takes the load off your turbocharger when the throttle is suddenly closed, preventing damage to both the turbo and your engine. These valves are adjustable from 0 to 50 psi, making them ideal for most boosted applications. Machined from aluminum and black anodized for durability, these blow-off valves offer a quality look for any turbo setup. They include vacuum fittings, aluminum weld flange, V-band assembly, and springs.
( 13 )
$69.99
—
$245.99
Ford Performance Parts is pleased to introduce supercharger kits for the 2024 5.0L Mustang GT and Dark Horse. Developed by Whipple Superchargers in partnership with Ford Performance Engineering, these kits are a performance powerhouse. The package delivers 810 hp at 7,500 rpm and 615 lbs.-ft. of torque at 4,800 rpm for active exhaust equipped Mustangs. (10 hp less for non-active exhaust). The Ford Performance kit includes: * Gen 6 3.0L Whipple supercharger * Whipple exclusive inverted twin screw design * Patented dual pass intercooler * M-9926-M5292 92mm throttle body * M-12405-M50A colder spark plugs * GT500 port fuel injectors * Ford Performance exclusive calibration * Tomahawk calibration delivery tool * PREMIUM FUEL REQUIRED [91+ octane] * Engineered and tested to Ford Motor Company's rigorous standards * Ford Performance EXCLUSIVE 3-year/36,000-mile warranty when installed by a Ford dealer or ASE certified technician and registered through the Ford Performance Parts Tech-line. For registration assistance, please call (800) 367-3788.
Not Yet Reviewed
$9,852.99
Magnuson supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. This technology recalibrates the engine and transmission control programs to work with the altered induction path and boost pressure of the supercharger. And that produces a seamless and consistent delivery of power over the entire rpm range--not just the high end! For you, that means Magnuson superchargers will boost your power output, and yet run like their factory installed units. Whether you're driving a Corvette or a Cadillac, a Silverado or a Hummer, or a Camaro or a Mustang, Magnuson supercharger kits deliver maximum performance!
( 12 )
$7,395.00
—
$9,494.99
Amplify your driving experience with a Fleece Performance Cheetah turbocharger. Featuring a Fleece exclusive 63mm FMW compressor wheel and a high-flow turbine wheel, these turbos are capable of supporting up to 650 rear wheel horsepower without sacrificing any drivability. These drop-in replacements offer smooth and quick throttle response with big top-end power. Whether you're towing, racing, sled pulling, or just driving to work, the Cheetah will get the job done. Order the model recommended for your truck.
( 2 )
$2,699.00
—
$3,099.00
Vortech supercharger systems for GM LS-Swaps operate at an even higher level of sophistication than any original equipment system. They're currently one of the most popular engine swap power plants in the world. In every application, the LS systems have established themselves to be fantastic platforms to swap into just about anything. They operate at an even higher level of sophistication, with a boost curve generated by Vortech's superchargers that are ideally matched with today's highly evolved engines and give you power when you need it. The supercharger and the technologically advanced subsystems fully integrate into the vehicle's existing platform, yielding a smooth continuity of power and performance.
( 3 )
$3,915.99
ACDelco GM Genuine Parts turbocharger actuators are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for your Chevrolet, Buick, GMC, or Cadillac vehicle. For optimal performance, choose a replacement turbocharger actuator that you know will fit and function like the original from ACDelco GM Genuine Parts.
( 4 )
$712.99
These Ford Performance Parts F-150 supercharger kits are designed to put approximately 160 hp and 160 ft.-lbs. of torque at the rear wheel. They feature an intercooled design, use the factory throttle body, and include a 95mm mass air meter. Ford Performance Parts F-150 supercharger kits include a Pro-Cal voucher to get your computer custom-calibrated.
( 1 )
$9,619.99
On Sale
Summit Bucks
Summit Racing™ Performance turbochargers have the latest in compressor aero technology with quick-spooling, yet free-flowing turbines. Starting with 66mm inducer sizes and working up to 79mm, the SUM-2600 Series turbos are reliable and a great value. The SUM-2700 Series are true race turbos starting at 76mm and go up from there. T4, T6, and V-band turbine housings are available. These are specially designed, balanced, and precision assembled in North America for class leading racers. They feature 2618 billet forged compressor wheels that offer superior flow and dependability at high boost.
( 7 )
$1,695.99
$689.99
—
$2,119.99
ACDelco GM Genuine Parts superchargers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Make the right choice for your GM vehicle; choose ACDelco GM Genuine Parts superchargers.
Not Yet Reviewed
$2,357.99
VS Racing offers a wide range of turbochargers for your horsepower-boosting target. Whether you need greater airflow for racing, some boost for the street, a higher A/R ratio for smoothness, or a low A/R ratio for the drag strip, VS has a turbo to enhance your performance. They're available in dozens of sizes, configurations, and other options.
( 22 )
$379.00
—
$928.00
Edelbrock E-Force supercharger kits use a positive displacement supercharger that is capable of producing over 500 hp. These kits include the supercharger with Eaton internals, a manifold, drive pulleys, a belt, and all necessary items for installation. Edelbrock E-Force superchargers are designed to provide more horsepower per pound of boost than their competitors, from off-idle through the rest of the rpm range. Plus, their internal bypass valve practically eliminates parasitic loss, consuming less than 1/3 of one horsepower at 60 mph. NOTE: They are not compatible with HEI distributors.
( 8 )
$3,644.95
—
$3,730.95
VS Racing wastegates reduce the risk of blowing your turbocharged engine by controlling the exhaust gases going through the external wastegate turbo system. This helps maintain proper boost pressure on your street and race vehicles. Relieve excess pressure from your turbocharged powerplant with VS Racing wastegates, available in multiple relief diameters. Features, parts, and specs may include: * Black anodized aluminum cap * Cast stainless steel base * Inlet and outlet flanges * Clamps * Various springs
( 7 )
$159.00
—
$189.00
AEM Electronics Tru-BoostX gauge-type controller kits combine the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for setup and they are fully functional right out of the box. If you want more boost, press the button on the right of the gauge face, and if you want less boost, press the button on the left of the gauge face. It's that simple, and it works! AEM Electronics Tru-BoostX gauge-type controller kits contain everything you need, including an on-board 80 psig pressure sensor, built-in overboost protection with two timed shutdown levels, a scramble boost setting, and a low-side output for a warning light. AEM includes a boost control solenoid that is specifically manufactured for automotive boost applications. This means that it will not corrode and stick from exposure to rich fuel mixtures, is pressure-tested to 100 psi, and includes -4 AN fittings to eliminate any chance of leaks.
( 3 )
$380.95
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Receive unprecedented value and add up to 75 percent more horsepower to your small block Chevy with these carbureted entry-level supercharger kits. These kits feature the Vortech PowerHat with diffusion technology and they will produce approximately 5 psi at 5,500 rpm on a mildly modified 350 engine. Additionally, most OEM Saginaw-type power steering pumps can be attached to the Vortech mounting bracket by using the supplied hardware in the kits. Smash that pedal and step into the world of superchargers! Vortech carbureted entry-level supercharger kits have you covered. Important information or requirements for the Vortech carbureted entry-level supercharger kits: * These systems were designed to fit on engines equipped with a "long" water pump and OEM V-belt drives or serpentine accessory drives; for correct belt alignment, the proper accessory drive crank pulley and accessory bracketry must be used * Earlier models equipped with short water pumps will require a long water pump to be installed * Quick Fuel, Demon, or Holley 4150-type, 4-barrel carburetor with mechanical secondaries designed for "blow-though" applications (may require rejetting or minor modification) * High performance, boost-referenced fuel pump * Compressor bypass valve * Accessory belts (will vary per application, depending on accessory configuration and supercharger pulley diameters) * Minor (bottom-side) modifications may be required, depending on the vehicle and type of intake manifold installed on the engine
( 5 )
$3,364.99
Turbosmart Vee Port blow-off valves are an ideal choice if you're looking for high flow, small size, and value! These BOVs feature a unique, variable exhaust port system, providing for the superior venting of excess pressure. Turbosmart Vee Port blow-off valves are the simple, yet effective solution for your application.
( 6 )
$364.95
Install smarter boost management with Turbosmart e-Boost 2! These electronic boost controllers give you ultimate control over the boost curve with smart features designed to get results. Engineered to win, Turbosmart e-Boost 2 boost controllers lead the class with 60 psi max boost operating pressure. They allow you to control, monitor, map, and compensate boost, plus control water spray, methanol or nitrous injection, manage shift/warning lights, and read/monitor rpm! Their state-of-the-art software is easy and logical to use, so you can confidently control all aspects of the boost curve--set point, gate pressure, and sensitivity. Whether you have a top-level racer or street-going vehicle, if it's turbocharged, make it Turbosmart-charged with Turbosmart e-Boost 2 boost controllers!
( 2 )
$629.95
—
$689.95
Turbosmart Gen-V Race Port blow-off valves are small, lightweight, high performance components for forced-induction competition level engines. Featuring unique collar designs and internal flow structures, they are 46 to 50 percent lighter and 25 percent smaller than the competition, while flowing 330 cfm, making Turbosmart Gen-V Race Port blow-off valves the highest flowing BOVs of their type on the market. They are offered in several different anodized colors and versions to fit your race application. All are supplied with vacuum fittings, V-band assemblies, and installed springs. Additional features: * Billet 6000 Series aluminum construction * Quick-release V-band collar for ease of installation and removal * MIL-Spec hard-anodized valve guide and stem * High-temperature silicone Nomex® diaphragm * Twin 1/8 in. NPT pressure ports for convenient positioning * 2.0 in. inlet flows over 330 cfm * Collar secured cap for quick spring changes * Most Race Ports have blue spring rated -18 to -14 InHg installed * Female flange version available to suit other manufacturer's 50mm flanges (no weld-on fitting supplied) and is 46 percent lighter * HE (Hall Effect) sensor cap versions allow you to monitor blow-off valve position for diagnostic or tuning purposes * Supercharger-specific versions have a soft pink spring rated -4 InHg installed, so it can stay open at idle, when supercharger is still producing boost
( 2 )
$309.95
—
$509.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
