$25 Off $250 / $50 Off $500, on Summit Racing Brand Products - Use Promo Code: BUILDIT

$25 Off $250 / $50 Off $500, on Summit Racing Brand Products - Use Promo Code: BUILDIT

It's the Season for Savings - Shop Holiday Deals Now!

Selected Filters


Loading...

Availability


Superchargers & Turbocharger Kits

Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best...

Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!

Superchargers

Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because...

Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!

Superchargers

Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because of their relationship to engine speed, superchargers commonly provide a power curve that increases with engine rpm, delivering boost with rapid response.

There are two main styles of superchargers: Roots and centrifugal. Roots-style superchargers use a pair of rotors within a housing to force air at higher than atmospheric pressure into your engines. The rotors can have a varying number of lobes and may be twisted, affecting how the air flows through the supercharger. Centrifugal style superchargers utilize a gearbox to spin a shaft, which is connected to compressor wheel, drawing in ambient air and compressing it on its way to the engine.

Turbochargers

Turbochargers utilize the exhaust gases produced by your engine to spin a turbine wheel located inside the turbocharger housing, which is connected to a compressor wheel by a shaft. As the two wheels turn, ambient air is sucked into the turbocharger’s compressor inlet and pushed into the engine. That air charge is often passed through an intercooler to increase its density.

Choosing the right turbocharger kit for your vehicle can be daunting, with factors like tubing size, A/R ratio, and multiple other factors to consider. However, Summit Racing makes it easy by offering turbocharger kits custom-designed for a wide range of vehicles, so you can get all the benefits without major engineering work.

For even more helpful information about the difference between superchargers and turbochargers, check out this helpful article at OnAllCylinders.com.

Summit Racing has everything you need to take your engine’s performance to the next level with a complete supercharger or turbocharger kit. If you’re looking for a complete, pre-designed, bolt-on solution, we’ve got you covered. But if you want to take the plunge into every aspect of blow off valves, wastegates, piping, intercoolers, boost controllers, and more, we can help you there, too. Summit Racing only carries quality parts from trusted brands like Precision, Garrett, Turbosmart, Turbonetics, Edelbrock, Magnuson, ProCharger, and more, so you can complete your supercharger or turbocharger build with confidence.

Part Groups

Results 1 - 6 of 6

FAST Gen III Hemi Supercharger/Camshaft Power Packages

FAST Gen III Hemi Supercharger/Camshaft Power Packages provided the perfect paring of products for enthusiasts to gain a 1,000+ hp potential from their Dodge. These Power Packages feature Edelbrock's 2650 TVS supercharger with patented, dual-pass, 3-core integrated intercooler, and COMP Cams' LST camshaft designed for supercharger applications. FAST Gen III Hemi Power Packages have all the basics required to install the supercharger, but necessary accessory items such as fuel injectors, air intake, and heat exchanger pump are left up to the installer, providing total flexibility for custom installations. FAST Edelbrock/COMP Cams Power Packages include: * 2650 TVS supercharger--patented integrated intercooler with 45 percent more cooling area and the ability to generate major power gains through lower inlet air charge temperatures * Supercharger pulleys: -- 3.500 in. is pump gas-friendly supercharger pulley for engine break-in, initial tuning, and general performance driving -- 2.625 in. when maximum power is desired on race fuel or E85 * Accessory drive pulleys * Fuel lines and rails * Low Shock Technology camshaft * Phaser limiter * Pushrods * Conical valve springs * Chromoly steel retainers * Valve locks and seals * Spring seats and shims * Installation hardware

Not Yet Reviewed

$9,279.95

FAST Rectangular Port Supercharger/Camshaft Power Packages for GM LS3

FAST Rectangular Port Supercharger/Camshaft Power Packages for GM LS3 provide the perfect paring of products for enthusiasts looking for 850+ hp potential from their GM LS3 engine. They feature Edelbrock's 2300 TVS supercharger with integrated intercooler and COMP Cams' LST camshaft designed for supercharger applications. These FAST Power Packages for GM LS3 have all the basics required to install the supercharger, but necessary accessories such as fuel injectors, air intake, and heat exchanger pump are left up to the installer, providing total flexibility for custom installations. FAST Edelbrock/COMP Cams Power Packages for GM LS include: * 2300 TVS supercharger—integrated high-capacity, dual bar and plate intercooler enables major power gains through lower inlet air charge temperatures * Supercharger pulleys: -- 3.500 in. is pump gas-friendly supercharger pulley for engine break-in, initial tuning, and general performance driving -- 2.750 in. when maximum power is desired on race fuel or E85 * Accessory drive pulleys * Fuel lines and rails * Low Shock Technology camshaft * Pushrods * Dual valve springs * Tool steel retainers * Valve locks and seals * Spring seats * Installation hardware

Not Yet Reviewed

$8,018.95

FAST Cathedral Port Supercharger/Camshaft Power Packages for GM LS

FAST Cathedral Port Supercharger/Camshaft Power Packages for GM LS provide the perfect paring of products for enthusiasts looking for 850+ hp potential from their GM LS engine. They feature Edelbrock's 2300 TVS supercharger with integrated intercooler and COMP Cams' LST camshaft designed for supercharger applications. FAST Power Packages for GM LS have all the basics required to install the supercharger, but necessary accessory items such as fuel injectors, air intake, and heat exchanger pump are left up to the installer, providing total flexibility for custom installations. FAST Edelbrock/COMP Cams Power Packages for GM LS include: * 2300 TVS supercharger—integrated high-capacity, dual bar and plate intercooler enables major power gains through lower inlet air charge temperatures * Supercharger pulleys: -- 3.875 in. is pump gas-friendly supercharger pulley for engine break-in, initial tuning, and general performance driving -- 3.000 in. when maximum power is desired on race fuel or E85 * Accessory drive pulleys * Fuel lines and rails * Low Shock Technology camshaft * Pushrods * Dual valve springs * Tool steel retainers * Valve locks and seals * Spring seats * Installation hardware

Not Yet Reviewed

$7,954.95

ZZPerformance Intercoolers

ZZPerformance offers a wide range of intercooler types designed to provide improved engine performance, fuel economy, and reduced emissions. These crucial components are commonly used in turbocharged and supercharged engines. The intercoolers cool the air that enters the engine, making it denser and increasing its oxygen content. This cooler air allows for more efficient combustion. ZZP intercoolers are made from quality materials and are available in a variety of styles to meet your specific application needs. Amplify the magical attributes of compressed air with the ZZP intercoolers! Select the model designed to meet the needs of your vehicle make/model.

Not Yet Reviewed

$499.99

On Sale

Mishimoto Intercoolers

Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!

5.0 out of 5 stars ( 2 )

$824.95


$742.46

ZZPerformance Modular Supercharger Pulleys

ZZPerformance offers modular supercharger pulleys for a variety of applications, including 2004-05 Buick, Chevy, and Pontiac engines. The aluminum pulleys are available in a range of outside diameters, with a black or clearcoat finish. Each pulley system includes hub, pulley of your choice, five stainless socket cap button screws, and one barbed retainer to replace the breather bolt. After removing the stock pulley, the ZZP steel hub presses on using the same pulley tool used to remove the factory pulley. No jaw-style puller should be used to remove a supercharger pulley. If it is used, it will destroy the pulley and possibly damage the supercharger. Once installed, the hub allows quick-changing of pulleys with an Allen wrench. The ZZP modular pulley system (MPS) allows you to change between pulleys depending on conditions; use one pulley for street use and a smaller for the track or when running high octane fuel. An MPS is a must for those planning to continue to modify their car in the future. ZZPerformance pulleys come with eight ribs on them, but a 6-rib belt will still work completely fine. * Fits: -- Pontiac Grand Prix GTP or 06+ GT -- Buick Regal GS -- Pontiac Bonneville SSEi -- 2004+ Impala SS -- 2004+ Monte Carlo SS * Pulley recommendations: -- 3.5 pulley for 01-03 GTP/GS with ZZP PCM, Tstat, colder plugs, bolt in downpipe, and a cold air intake -- 3.5 in. for 2004+ Grand Prix recommended for cars with 1.9 rockers, Tstat, colder plugs, some exhaust work, and a cold air intake -- 3.4 in. for 1997-2000 GTP/GS with ZZP PCM, Tstat, colder plugs, bolt in downpipe, and a cold air intake -- 3.3 in. pulley requires a small cam or headers or any SS intercooler -- 3.2 in. pulley requires a XP cam or a SS intercooler with 1.9 rockers -- 3.0 in. pulley requires larger injectors and a full-size intercooler -- 2.8 in. pulley requires a cam, intercooler, and headers

Not Yet Reviewed

$99.98

  • 1
  • Page 1 of 1

Modal Header