Availability
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because of their relationship to engine speed, superchargers commonly provide a power curve that increases with engine rpm, delivering boost with rapid response.
There are two main styles of superchargers: Roots and centrifugal. Roots-style superchargers use a pair of rotors within a housing to force air at higher than atmospheric pressure into your engines. The rotors can have a varying number of lobes and may be twisted, affecting how the air flows through the supercharger. Centrifugal style superchargers utilize a gearbox to spin a shaft, which is connected to compressor wheel, drawing in ambient air and compressing it on its way to the engine.
Turbochargers utilize the exhaust gases produced by your engine to spin a turbine wheel located inside the turbocharger housing, which is connected to a compressor wheel by a shaft. As the two wheels turn, ambient air is sucked into the turbocharger’s compressor inlet and pushed into the engine. That air charge is often passed through an intercooler to increase its density.
Choosing the right turbocharger kit for your vehicle can be daunting, with factors like tubing size, A/R ratio, and multiple other factors to consider. However, Summit Racing makes it easy by offering turbocharger kits custom-designed for a wide range of vehicles, so you can get all the benefits without major engineering work.
For even more helpful information about the difference between superchargers and turbochargers, check out this helpful article at OnAllCylinders.com.
Summit Racing has everything you need to take your engine’s performance to the next level with a complete supercharger or turbocharger kit. If you’re looking for a complete, pre-designed, bolt-on solution, we’ve got you covered. But if you want to take the plunge into every aspect of blow off valves, wastegates, piping, intercoolers, boost controllers, and more, we can help you there, too. Summit Racing only carries quality parts from trusted brands like Precision, Garrett, Turbosmart, Turbonetics, Edelbrock, Magnuson, ProCharger, and more, so you can complete your supercharger or turbocharger build with confidence.
Showing In Stock Items. Show All 69 Items.
Magnuson intake manifold gaskets are high-quality gaskets designed to meet or exceed the quality of your factory gaskets. They are available for a wide variety of applications to meet your needs.
( 4 )
$62.00
ICT Billet intercooler water manifold adapters are machined from premium aerospace-grade USA 6061 T-6 billet aluminum. They're offered in the most common sizes to accommodate a variety of custom plumbing applications.
Not Yet Reviewed
$115.99
—
$197.99
On Sale
BD Diesel exhaust manifold turbo adapters are an inexpensive alternative to replacing the manifold. These adapters allow for quicker changes back and forth between different turbo mounts without changing the manifold. For quick changes of your turbo head units BD Diesel has you covered.
( 1 )
$144.95
$130.46
Wilson Manifolds blow-off valve assemblies are available in two sizes with 2.5 or 3 in. V-band connectors. Crafted from billet aluminum, they direct the airflow correctly through the throttle body to add horsepower. Select the size the size needed. Benefits: * Greatly reduces the risk of throttle body and charge pipe damage * Creates low pressure zone to instantly evacuate boost pressure to the blow-off valves * Instantly relieves pressure on the throttle body blade when the blade closes * Eliminates reversion wave to a blow-off valve downstream in the charge pipe
Not Yet Reviewed
$1,316.99
—
$1,563.99
ICT Billet supercharger manifold fasteners are designed to mount your supercharger case assembly to the intake manifold. They're available in a variety of styles, materials, and finishes based on your specific supercharger model. Order the set recommended for your application.
Not Yet Reviewed
$29.99
On Sale
Holley boost control solenoids are designed for optimal performance when using the boost control function of Holley EFI. Some setups require two solenoids and some require one. They're driven by a Pulse Width Modulated (PWM) output of the ECU. It is advised NOT to use the PWM+ outputs on a Holley HP ECU, but rather use the PWM- outputs. If you have a Holley Dominator ECU, use either the PWM- outputs or a PWM+ output on the J2B connector.
( 4 )
$449.95
$403.95
On Sale
Increase the horsepower in your Cummins with a BD Diesel Iron Horn Cummins turbo kit. These packages are available for a variety of specific year, make, model, and engine applications. Features and benefits include: * Increased airflow for more power, response, and reliability * Replace your factory turbo with a 300 Series SX-E BorgWarner T4 flange turbo * Includes a BD Performance Plus exhaust manifold and gaskets * No extra piping required; turbo drops into place for an easy, clean installation
( 1 )
$2,169.00
$1,884.60
—
$2,220.00
Wagner Tuning competition intercoolers replace your OEM unit with performance gains and low intake temperatures. Optimized by CAD, most feature lightweight, low restriction tube and fin construction, with a competition high-speed core and cast aluminum end tanks to give these intercoolers excellent cooling properties with less pressure drop. The design was improved further with flow analyses and simulations. Wagner Tuning competition intercoolers deliver an easy fitment and maximized cooling. They are treated with a protective anti-corrosion coating with perfect thermal heat-dissipating characteristics. Order the model designed for your vehicle application.
Not Yet Reviewed
$2,490.00
On Sale
Summit Racing™ turbocharger replacement kits are engineered packages with upgraded components needed to replace your high-mileage stock turbos. These one-click kits give you what you need to do the job correctly and address some of the shortcomings of the factory system. Check out the features below: * Brand new direct-fit turbos * Cast stainless exhaust manifolds improved flow and durability * Inconel manifold studs and stainless hardware kit * MLS stainless gaskets * Improved coolant line kits
Not Yet Reviewed
$2,441.92
$2,299.99
Summit Racing™ turbo oil feed lines ensure that your system gets an adequate oil supply. We offer replacements for your OE setup, as well as aftermarket kits that prevent premature bearing failures from oil starvation. All include extra-flexible, smooth bore PTFE hose and high-quality adapter fittings. Whether you're replacing or upgrading, Summit Racing™ turbo oil feed lines are available for your application.
Not Yet Reviewed
$169.99
On Sale
Get the most out of your diesel truck performance with aFe BladeRunner intercooler pipes. The connecting arms are fully mandrel-bent stainless steel or aluminum tubing that will outflow factory pipes, giving you more power and fuel efficiency. The intercooler pipes free-flowing design aids in decreasing EGTs to help protect your motor from power-robbing heat. BladeRunner pipes are available for these positions: turbocharger-to-intercooler, intercooler-to-intake, and the complete system. The kits come complete with the hardware needed for installation, and a powdercoated finish protects pipes from the elements. Don't let your factory plumbing rob your diesel of power—upgrade with aFe BladeRunner intercooler pipes!
( 18 )
$339.15
$305.24
Edelbrock E-Force supercharger kits use a positive displacement supercharger that is capable of producing over 500 hp. These kits include the supercharger with Eaton internals, a manifold, drive pulleys, a belt, and all necessary items for installation. Edelbrock E-Force superchargers are designed to provide more horsepower per pound of boost than their competitors, from off-idle through the rest of the rpm range. Plus, their internal bypass valve practically eliminates parasitic loss, consuming less than 1/3 of one horsepower at 60 mph. NOTE: They are not compatible with HEI distributors.
( 8 )
$3,644.95
—
$3,730.95
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Receive unprecedented value and add up to 75 percent more horsepower to your small block Chevy with these carbureted entry-level supercharger kits. These kits feature the Vortech PowerHat with diffusion technology and they will produce approximately 5 psi at 5,500 rpm on a mildly modified 350 engine. Additionally, most OEM Saginaw-type power steering pumps can be attached to the Vortech mounting bracket by using the supplied hardware in the kits. Smash that pedal and step into the world of superchargers! Vortech carbureted entry-level supercharger kits have you covered. Important information or requirements for the Vortech carbureted entry-level supercharger kits: * These systems were designed to fit on engines equipped with a "long" water pump and OEM V-belt drives or serpentine accessory drives; for correct belt alignment, the proper accessory drive crank pulley and accessory bracketry must be used * Earlier models equipped with short water pumps will require a long water pump to be installed * Quick Fuel, Demon, or Holley 4150-type, 4-barrel carburetor with mechanical secondaries designed for "blow-though" applications (may require rejetting or minor modification) * High performance, boost-referenced fuel pump * Compressor bypass valve * Accessory belts (will vary per application, depending on accessory configuration and supercharger pulley diameters) * Minor (bottom-side) modifications may be required, depending on the vehicle and type of intake manifold installed on the engine
( 5 )
$3,364.99
Manufacturer Rebate
Innovate SCG-1 boost controllers integrate the industry-leading DirectDigital wideband air/fuel ratio technology. The company paired its advanced oxygen sensor control technology with its all-new proprietary solenoid control that provides superior boost control accuracy, response, and safety. A user-programmable shift light was added, with the entire package housed in a compact gauge body for ease of installation and use. As with all of Innovate's air/fuel ratio products, the SCG-1 boost controllers utilize only 100 percent digital wideband air/fuel ratio technology to provide real-time feedback to the SCG-1. This air/fuel information is displayed on an integrated OLED display, along with manifold pressure and wastegate duty status. The air/fuel ratio information is also used to provide a user-definable boost cut that enhances the safety margin over most competitors' offerings which rely only on overboost threshold. Innovate SCG-1 boost controllers have a full-programmable analog output, ideal for applications using standalone ECUs, piggyback ECUs, or external data loggers.
( 3 )
$420.99
ARP anodized aluminum studs allow your blower and manifold to separate during a blower explosion to minimize engine damage. These kits also include 12-point, aerospace-quality nuts and parallel, ground-hardened washers.
( 7 )
$80.99
—
$89.99
Milodon aluminum blower studs and aluminum nuts are designed to permit blower and manifold separation during unexpected blower explosions without causing damage to the manifold and blower housing, which would otherwise occur. These studs are used by professional racers in Top Fuel, Funny Car, and Alcohol classes and are recommended for all supercharged applications. Studs, nuts, and washers are included.
( 4 )
$105.95
Summit Bucks
Edelbrock E-Force universal supercharger systems are designed for engine swaps into street rods and muscle cars. They feature 12 in. long runners for maximum low-end torque and great drivability. They're capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than an Edelbrock E-Force universal supercharger system—exactly what you need for your engine swap project. Order the model recommended for your year/make and engine application. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
Not Yet Reviewed
$7,658.95
—
$8,766.95
Instant Rebate
Vibrant Performance has turbo discharge flanges for your custom fabrication projects. Crafted from T304 stainless steel and mild steel, these flanges are precision laser-cut and CNC-machined to ensure a perfect fit on your turbo components. Choose from the Vibrant selection of discharge flanges for turbo manifold fabrications.
( 6 )
$35.50
—
$53.19
On Sale
Turbosmart Gen-V Pro-Gate electronic wastegates feature a Gen-V wastegate body, so you can be confident the mounting orientation will match your existing manifold and outlet hardware. Built on the successful class leading Gen-V Comp-Gate 50 architecture, these units have stellar flow capacity and heat handling characteristics, as well as unparalleled control. There are no springs or hoses and no boost reference signal, nor any of the limitations associated with any of them. Gone are minimum boost levels associated with base spring pressure or heat related issues with hoses. If your manifold priority is good enough, you can set your boost anywhere from zero up to "all of it" from a laptop or tuning interface. Additional features: * Aluminum and cast stainless steel construction * Black anodized finish on top cap * Nitronic 40 valve guide and high-temperature 347 SS body * Liquid cooled, electronic actuator * Strap-type V-band clamps * 1/8 in. NPT * User adjustable actuator position * Onboard analog 0-5 V wastegate position sensor * Onboard analog 0-5 V actuator temperature sensor
Not Yet Reviewed
$1,128.95
$903.16
Summit Bucks
Now you can get more power for your Pentastar equipped JK! These all-new Edelbrock E-Force Jeep Wrangler supercharger kits are designed exclusively for the Pentastar 3.6L V6 engine. They'll increase torque for improved towing and off-road performance when you need it the most, while retaining great daily driving manners. The superchargers have been designed from the ground-up, and utilize the Eaton Gen VI 1320 TVS rotor assembly for maximum efficiency in a compact package. The manifold assembly also features a dual-pass intercooler for reduced air temperature. Edelbrock E-Force Jeep Wrangler Supercharger Kits have great looks, as well, black powdercoated with machined highlights for durability and a unique appearance to give your engine compartment a distinctive look. Here are a few more Edelbrock E-Force Jeep Wrangler supercharger kit features: * Exclusive design fits under the stock hood * Bolt-on installation * Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required) * Electronic PCM programming module with application-specific tuning * Integrated bypass valve for minimal decrease in fuel economy
( 2 )
$6,772.95
—
$8,347.95
Granatelli Motor Sports turbo adapters allow you to adapt the most popular turbo and exhaust manifold flanges to a V-band connection and maintain a low-profile for adequate clearance for turbo installations. These turbo flange V-band adapters are stainless steel cast and machined with mounting holes, in threaded or non-threaded flange applications, depending on your needs.
Not Yet Reviewed
$59.85
—
$69.83
Holley Lo-Ram billet burst panel ducts complement their LS Ultra Lo-Ram EFI intake manifold kits. They designed the kits for boosted engine applications requiring protection for the engine from an intake plenum backfires. Order Holley LS Ultra Lo-Ram billet burst panel ducts in your choice of quality finish to fit your standard "large" burst panels (6 1/8 in. x 3 1/8 in.). More product features include: * Designed to direct the products of an intake manifold plenum backfire and burst to the outside of the vehicle bodywork * Can be used on any intake manifold plenum fitted with a standard "large" burst panel flange * High-quality mounting fasteners
Not Yet Reviewed
$243.95
Summit Bucks
Edelbrock E-Force Camaro SS Stage 1 street legal supercharger kits transform your Camaro into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 deg. of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. The Edelbrock E-Force Camaro SS street legal supercharger kits are a complete system that maximizes efficiency and performance by minimizing air restriction into, and out of, the supercharger. The supercharger housing itself is integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between gasket surfaces. The system also utilizes a front drive, front inlet configuration giving it the shortest, least restrictive inlet path on the market. The upper plenum area is enclosed by a top cover that has been designed to provide an appealing and distinctive under-hood appearance. This configuration allows for a compact package that can fit under the stock hood and cowl of the Camaro, without sacrificing runner length, or intercooler area. Edelbrock E-Force Camaro SS street legal supercharger kits provide neck snapping performance that is safe to operate on a completely stock engine. The kits are 50-state emission legal, and come with a 3-year 36,000 mile warranty (restrictions apply) so that there are no worries when installing it on a brand new car. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.
( 3 )
$8,342.95
—
$9,286.95
PRODRAG injector boost controllers are the fastest and most accurate way to control boost. Utilizing an injector for moving boost increase and decrease individually allows for very fine adjustments—along with the ability to hold an exact amount of boost down the track. These controllers can be used for standard manifold referenced boost control as well as C02 and compressed air setups. The units are compact for mounting in tight areas, and feature an 1/8 in. NPT inlet and dual 1/8 in. NPT outlet ports. Each kit comes with a billet block assembly machined in house using USA sourced aluminum with a black anodized finish, two FID 2000cc injectors, 2x injector plug/pin kit, and mounting hardware.
Not Yet Reviewed
$549.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
