Availability
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because of their relationship to engine speed, superchargers commonly provide a power curve that increases with engine rpm, delivering boost with rapid response.
There are two main styles of superchargers: Roots and centrifugal. Roots-style superchargers use a pair of rotors within a housing to force air at higher than atmospheric pressure into your engines. The rotors can have a varying number of lobes and may be twisted, affecting how the air flows through the supercharger. Centrifugal style superchargers utilize a gearbox to spin a shaft, which is connected to compressor wheel, drawing in ambient air and compressing it on its way to the engine.
Turbochargers utilize the exhaust gases produced by your engine to spin a turbine wheel located inside the turbocharger housing, which is connected to a compressor wheel by a shaft. As the two wheels turn, ambient air is sucked into the turbocharger’s compressor inlet and pushed into the engine. That air charge is often passed through an intercooler to increase its density.
Choosing the right turbocharger kit for your vehicle can be daunting, with factors like tubing size, A/R ratio, and multiple other factors to consider. However, Summit Racing makes it easy by offering turbocharger kits custom-designed for a wide range of vehicles, so you can get all the benefits without major engineering work.
For even more helpful information about the difference between superchargers and turbochargers, check out this helpful article at OnAllCylinders.com.
Summit Racing has everything you need to take your engine’s performance to the next level with a complete supercharger or turbocharger kit. If you’re looking for a complete, pre-designed, bolt-on solution, we’ve got you covered. But if you want to take the plunge into every aspect of blow off valves, wastegates, piping, intercoolers, boost controllers, and more, we can help you there, too. Summit Racing only carries quality parts from trusted brands like Precision, Garrett, Turbosmart, Turbonetics, Edelbrock, Magnuson, ProCharger, and more, so you can complete your supercharger or turbocharger build with confidence.
Showing In Stock Items. Show All 129 Items.
AMS Performance short ram air intakes remove clutter and simplify your engine bay while adding horsepower! Their exclusive design improves airflow to the turbocharger and enhances the performance. These components sport professional TIG welding by master fabricators using high-quality materials for optimum durability. They're available for a variety of applications, including Mitsubishi models from 2008 and up.
Not Yet Reviewed
$374.95
Ready for the ultimate upgrade? Wagner Tuning turbo inlets deliver first-class quality and precision with maximum performance and driving pleasure. The turbo inlets' inner diameters have been increased for the utmost air mass flow, allowing you to achieve a higher maximum output and improved response, especially with hybrid turbochargers. Wagner Tuning turbo inlets are direct replacements, enabling effortless plug-and-play installation. They are manufactured in Germany using the latest CNC technology and are made of high-strength aluminum alloy with a durable exterior finish for maximum robustness and lasting attractive appearance. Select the turbo inlet designed for your vehicle.
Not Yet Reviewed
$190.00
Magnuson intake manifold gaskets are high-quality gaskets designed to meet or exceed the quality of your factory gaskets. They are available for a wide variety of applications to meet your needs.
( 4 )
$62.00
On Sale
Summit Bucks
Mishimoto has your next project covered with their line of universal aluminum intercooler intake pipes available in a polished aluminum finish and is perfect for use on intercooler or intake systems. Mishimoto's universal aluminum intercooler piping line has all the sizes and shapes to fit your build with outer diameters ranging from 2.25 in. to 4 in., and you have a choice between straight, 90 degree, and 180 degree sections. The Mishimoto universal aluminum intercooler piping, like all their products, includes the Mishimoto lifetime warranty for a worry-free addition to your custom build. Select the intercooler intake pipes designed for your application needs.
Not Yet Reviewed
$64.95
$58.46
On Sale
Summit Bucks
Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!
( 2 )
$137.95
—
$4,081.95
$124.16
—
$3,673.76
On Sale
Get the most out of your diesel truck performance with aFe BladeRunner intercooler pipes. The connecting arms are fully mandrel-bent stainless steel or aluminum tubing that will outflow factory pipes, giving you more power and fuel efficiency. The intercooler pipes free-flowing design aids in decreasing EGTs to help protect your motor from power-robbing heat. BladeRunner pipes are available for these positions: turbocharger-to-intercooler, intercooler-to-intake, and the complete system. The kits come complete with the hardware needed for installation, and a powdercoated finish protects pipes from the elements. Don't let your factory plumbing rob your diesel of power—upgrade with aFe BladeRunner intercooler pipes!
( 18 )
$908.25
$240.03
—
$817.43
A damaged hose can deplete your engine's power. Dorman intercooler pipes are constructed from durable oil and heat-resistant material to withstand the intensely pressurized air of the turbo system. They are direct replacements for a proper fit every time. Their high-quality design ensures year after year of service.
( 6 )
$173.99
On Sale
Summit Bucks
Mishimoto intercooler and pipe kits let your engine breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle just about anything. Mishimoto performance intercoolers offer increased core volume and fin surface area, which results in increased flow, reduced outlet temperatures, and the ability to generate gains in horsepower and torque. Intercoolers are available in black or silver. Pipes are available polished or with a black powdercoat. As with all their products, the Mishimoto intercooler and pipe kits are backed by their signature Mishimoto Lifetime Warranty.
Not Yet Reviewed
$1,350.95
$1,077.80
—
$1,215.86
On Sale
COBB Tuning intercooler hard pipes allow the use of the factory or COBB intercooler core, while cleaning up the engine bay and freeing up airflow to the engine. These hard pipes make great replacements for factory plastic tubing, removing restrictions and improving airflow to the engine. The single-piece hard pipes are formed from mandrel-bent aluminum tubing for fitment on both the cold side and hot side of the intercooler. The results are weld-free pipes from the turbo outlet to intercooler inlet, and from the intercooler outlet to the throttle body. Silicone hose couplings and T-bolt hose clamps are available (depending on application) to facilitate installation. Order the kit designed for your specific vehicle application.
( 1 )
$250.00
—
$685.00
$212.50
—
$582.25
On Sale
Boost the power and performance of your vehicle with Roush supercharger upgrade kits. They bring your Roush supercharger up to a more tire-shredding amount of horsepower and lbs.-ft. of torque! Enjoy a considerable power increase for a nominal value when you order the Roush supercharger upgrade kit designed for your application.
Not Yet Reviewed
$449.99
$404.99
On Sale
Summit Bucks
Mishimoto intercooler pipe and boot kits improve the power and efficiency of your rig. Unlike restrictive power-robbing factory pipes, Mishimoto polished aluminum intercooler piping is engineered to eliminate unnecessary bends, and needed bends are mandrel-bent to keep the airflow smooth and flowing. And, of course, an increase in airflow results in more power and lower EGTs to support your diesel rig at any power level. These kits include their silicone boots with DuraCore technology that provides superior resistance to heat, pressure, fuel, and oil to effectively increase their life and prevent leaks and blowouts. Adding even more to these kits are Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. Intercooler pipe and boot kits include aluminum Mishimoto M-logo badges. Mishimoto intercooler pipe and boot kits are ideal upgrades in reliability and performance.
( 7 )
$298.95
—
$324.95
$269.06
—
$292.46
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Receive unprecedented value and add up to 75 percent more horsepower to your small block Chevy with these carbureted entry-level supercharger kits. These kits feature the Vortech PowerHat with diffusion technology and they will produce approximately 5 psi at 5,500 rpm on a mildly modified 350 engine. Additionally, most OEM Saginaw-type power steering pumps can be attached to the Vortech mounting bracket by using the supplied hardware in the kits. Smash that pedal and step into the world of superchargers! Vortech carbureted entry-level supercharger kits have you covered. Important information or requirements for the Vortech carbureted entry-level supercharger kits: * These systems were designed to fit on engines equipped with a "long" water pump and OEM V-belt drives or serpentine accessory drives; for correct belt alignment, the proper accessory drive crank pulley and accessory bracketry must be used * Earlier models equipped with short water pumps will require a long water pump to be installed * Quick Fuel, Demon, or Holley 4150-type, 4-barrel carburetor with mechanical secondaries designed for "blow-though" applications (may require rejetting or minor modification) * High performance, boost-referenced fuel pump * Compressor bypass valve * Accessory belts (will vary per application, depending on accessory configuration and supercharger pulley diameters) * Minor (bottom-side) modifications may be required, depending on the vehicle and type of intake manifold installed on the engine
( 5 )
$3,364.99
On Sale
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Their centrifugal supercharger kits feature lightweight aluminum impellers that are heat-treated and high-speed balanced to ensure smooth operation. An O-ring compressor housing seal and an innovative impeller seal improve sealing and reduce friction. Vortech has taken away the headaches of building a custom kit by engineering these kits to have a true OEM-quality fit and finish. Each kit is 100 percent complete, right down to the wire ties. Most kits include a matched compressor supercharger unit with SQ technology for "Super Quiet" operation. A high-flow air intake system with a reusable air filter, heat-resistant silicone hose couplings, and premium-grade flex hose is included as well. Additional features: * Flow-tested cast aluminum and/or urethane air discharge tubing * OEM-style, heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware * Choice of satin or polished finish * Step-by-step, fully illustrated installation manual
( 9 )
$3,633.99
—
$10,390.99
$3,270.59
—
$9,351.89
On Sale
Summit Bucks
When the heat gets turned up, keep your cool with one of these Mishimoto ice tanks to your air-to-water intercooler setup! The secret to maintaining power levels is to ensure that your engine is getting the coolest, densest air possible. Even with an air-to-water intercooler and heat exchanger, keeping your intake air temperatures cool can be a challenge. Whether you're hot lapping at the drag strip, bouncing off the rev limiter drifting, or simply enjoying some spirited driving, giving your engine cooler air means more power and performance. Adding a Mishimoto ice tank to your air-to-water intercooler setup can help reduce IATs drastically, help reduce heat-soak, and adds fluid capacity to your system. These intercooler ice tanks are perfect for adding to an existing air-to-water system with a heat exchanger or for building a system from scratch. All Mishimoto products include their signature lifetime warranty. Product features and benefits: * Tank is constructed from fully TIG-welded aluminum * Offered in several different gallon size liquid capacities to better suit your intercooler setup * Designed with internal mounts to utilize a Rule 2000 or Rule 3700 internal bilge pump, or external pump of your choice * Large flip-open lid with lock for easy filling and secure containment of contents * Integral mounting flanges for stable and secure mounting in any location * 3/8 in. NPT drain plug for easy emptying * 1/2 in. NPT port for electrical bulkhead for water-tight wiring to internal pump * Includes 1/2 in. electrical bulkhead for wiring internal pump and 1/2 in. NPT plug if an external pump is used instead * -12 ORB inlet and outlet ports for a tight, leak-free seal * Combine with Mishimoto's universal air-to-water single pass intercooler or universal air-to-water dual pass intercooler (not included) * To complete your system, pair with -12ORB To 3/4 in. hose barb air-to-water intercooler fittings or -12ORB to -12AN air-to-water intercooler fittings (sold separately)
( 3 )
$229.95
—
$263.95
$206.96
—
$224.95
On Sale
Turbosmart Kompact EM dual port blow-off valves vent to the atmosphere and back into the air intake. These EM (Electro-Mechanical) BOVs are true plug-and-play upgrade replacements featuring a leak-proof design, lightning fast actuation, and higher pressure handling capabilities, making them high performance substitutes for your factory plastic units. They also allow you to retain complete OE control of their operation. Turbosmart Kompact EM dual port blow-off valves are all-billet CNC construction with high temperature seals and the latest patented technology. They are must-haves for hybrid or larger flowing turbos that utilize OE electronic diverter valves. By not leaking, the EM will achieve target boost without stressing the turbocharger and wastegate. Key features include: * Patent pending integrated pressure control * True plug-and-play upgrade * Integrated proprietary high-temperature solenoid valve * Billet construction with high-temperature O-rings
( 2 )
$303.95
—
$576.95
$243.16
—
$461.56
On Sale
Fluidyne heat exchangers and intercoolers are designed to keep your turbocharged or supercharged engine working at optimum levels. A cooler intake charge means more power from your engine. These units are made from aluminum and precision-welded for maximum efficiency and durability. The coolers use mounting tabs welded to the outer case for a simple installation. Order the size or model recommended for your application.
( 9 )
$467.00
—
$1,054.00
$373.60
—
$843.20
Summit Bucks
Edelbrock E-Force GM truck and SUV Stage 1 Street Legal supercharger kits up the power in your late model GM truck or SUV. These GM Supercharger systems are specially designed for each application and will allow you to boost your towing performance to impressive levels. These systems feature long intake runners for maximum low end torque making them ideal for towing and off-road performance applications.
( 5 )
$7,931.95
—
$10,803.95
On Sale
Turbosmart Kompact dual port blow-off valves offer high performance, OEM fitment, versatility, and affordability—in other words, everything you need! These BOVs feature dual ports that vent into both the atmosphere and the air intake, reducing turbo lag and eliminating cavitation. Turbosmart Kompact dual port blow-off valves are designed to be bolt-on replacements for plastic factory Bosch or Denso units. They use sequential timing to allow for quieter operation during normal driving, while still providing the benefits of a vent-to-atmosphere type BOV under race conditions. They are easily converted into full atmospheric or full bypass units by using the included port blanking plug.
( 28 )
$207.95
—
$571.95
$166.36
—
$457.56
AFCO Racing heat exchangers are designed to replace your factory heat exchanger and provide more efficient intake cooling. They are made from aluminum, TIG-welded, and come in a natural finish, and feature enhanced fin technology for greater airflow. These heat exchangers are direct bolt-in applications that require no modifications to facilitate an easy installation.
( 4 )
$445.99
—
$949.99
PWR North America Chevrolet Camaro ZL1 heat exchangers are engineered to end dreaded heat soak, which robs major horsepower from the engine. The heat exchangers use a close center tube core to reduce intake temperatures, allowing for more timing and increased boost pressure over the stock unit. These heat exchangers are fairly easy to install, as they simply bolt into the stock locations and use the factory hoses. Select the PWR North America heat exchanger designed for your application needs.
( 2 )
$799.00
Magnuson heat exchangers and intercoolers are designed to keep your supercharged engine working at optimum temperature levels. A cooler intake charge means more power from your engine. These units are made from aluminum and are precision-welded for maximum efficiency and durability.
Not Yet Reviewed
$597.00
On Sale
Turbosmart Kompact plumb back blow-off valves replace your factory BOV with higher performance! These bolt-on replacements offer a smart choice in OEM fitment and value. Kompact blow-off valves are built tough from black anodized aluminum, providing superior flow and greater structural integrity under boost. Turbosmart flange-type plumb back blow-off valves are available in a range of styles to fit many models—especially those with constrained engine bay access. They're full recirculating, directing all excess pressure back into your intake system. Swap out your factory plastic units for reliability, quality, and value with these Turbosmart Kompact plumb back blow-off valves.
( 8 )
$155.95
—
$466.95
$124.76
—
$373.56
Wagner Tuning competition intercoolers replace your OEM unit with performance gains and low intake temperatures. Optimized by CAD, most feature lightweight, low restriction tube and fin construction, with a competition high-speed core and cast aluminum end tanks to give these intercoolers excellent cooling properties with less pressure drop. The design was improved further with flow analyses and simulations. Wagner Tuning competition intercoolers deliver an easy fitment and maximized cooling. They are treated with a protective anti-corrosion coating with perfect thermal heat-dissipating characteristics. Order the model designed for your vehicle application.
Not Yet Reviewed
$690.00
—
$3,440.00
On Sale
Summit Bucks
Mishimoto R-Line intercoolers provide the perfect cooling capacity needed for supercharged and turbocharged vehicles. These front-mount units feature durable bar-and-plate cores that provide superior heat transfer and effectively reduce air intake temperatures. Mishimoto R-Line intercoolers are constructed of powdercoated 6061 aluminum and provide a fin pitch of 15 fins/in., along with massive 4 in. cores and 3 in. inlets/outlets to flow 1,250 cfm. Additional features: * Robust, one-piece cast aluminum end tanks withstand high-boost pressures * Universal mounting points * TIG-welded to perfection * Mishimoto Lifetime Warranty * Available in silver, black, or gold * Note: For your taste, only one side of the intercooler has the Mishimoto logo
( 6 )
$376.95
—
$398.95
$317.95
—
$359.06
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
