Availability
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because of their relationship to engine speed, superchargers commonly provide a power curve that increases with engine rpm, delivering boost with rapid response.
There are two main styles of superchargers: Roots and centrifugal. Roots-style superchargers use a pair of rotors within a housing to force air at higher than atmospheric pressure into your engines. The rotors can have a varying number of lobes and may be twisted, affecting how the air flows through the supercharger. Centrifugal style superchargers utilize a gearbox to spin a shaft, which is connected to compressor wheel, drawing in ambient air and compressing it on its way to the engine.
Turbochargers utilize the exhaust gases produced by your engine to spin a turbine wheel located inside the turbocharger housing, which is connected to a compressor wheel by a shaft. As the two wheels turn, ambient air is sucked into the turbocharger’s compressor inlet and pushed into the engine. That air charge is often passed through an intercooler to increase its density.
Choosing the right turbocharger kit for your vehicle can be daunting, with factors like tubing size, A/R ratio, and multiple other factors to consider. However, Summit Racing makes it easy by offering turbocharger kits custom-designed for a wide range of vehicles, so you can get all the benefits without major engineering work.
For even more helpful information about the difference between superchargers and turbochargers, check out this helpful article at OnAllCylinders.com.
Summit Racing has everything you need to take your engine’s performance to the next level with a complete supercharger or turbocharger kit. If you’re looking for a complete, pre-designed, bolt-on solution, we’ve got you covered. But if you want to take the plunge into every aspect of blow off valves, wastegates, piping, intercoolers, boost controllers, and more, we can help you there, too. Summit Racing only carries quality parts from trusted brands like Precision, Garrett, Turbosmart, Turbonetics, Edelbrock, Magnuson, ProCharger, and more, so you can complete your supercharger or turbocharger build with confidence.
Showing In Stock Items. Show All 66 Items.
On Sale
AEM Electronics Tru-BoostX gauge-type controller kits combine the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for setup and they are fully functional right out of the box. If you want more boost, press the button on the right of the gauge face, and if you want less boost, press the button on the left of the gauge face. It's that simple, and it works! AEM Electronics Tru-BoostX gauge-type controller kits contain everything you need, including an on-board 80 psig pressure sensor, built-in overboost protection with two timed shutdown levels, a scramble boost setting, and a low-side output for a warning light. AEM includes a boost control solenoid that is specifically manufactured for automotive boost applications. This means that it will not corrode and stick from exposure to rich fuel mixtures, is pressure-tested to 100 psi, and includes -4 AN fittings to eliminate any chance of leaks.
( 3 )
$380.95
$342.85
On Sale
The G-Force III is the latest iteration of Go Fast Bits' feature-packed electronic boost controller—now with the ability to monitor and display your engine's air/fuel ratio in either Lambda or AFR. By connecting the analog output of most wideband oxygen controllers (i.e. Innovate LC-2, AEM UEGO etc.; sold separately) to the G-Force III's auxiliary input, you can toggle between boost pressure and air/fuel ratio display. This saves you from having to install a separate AFR gauge in your car, and it can also save your engine! A lean mixture at high boost can destroy an engine in seconds, and a stand-alone AFR gauge is next to useless when accelerating hard, as your concentration is likely to be on the road in front of you. The G-Force III safeguards your engine against a lean mixture by lowering boost to the minimum setting, and visibly warning you by flashing the display lighting. Whether your car is a daily driver or an all-out track weapon, the G-Force III has the features to tailor boost to suit your needs. Set up to six boost presets and select on the fly; use the scramble feature for overtaking, launching, towing, or protecting the engine—and you can even customize the lighting color to suit your interior! No other EBC on the market offers the features, control, ease of use, and value for money like the G-Force III! Additional G-Force III electronic boost controller details: * For boost pressures up to 50 psi (3.45 bar, 345 KPA) * Adjust peak boost, rise rate, and closed loop correction. * Display boost pressure in PSI, BAR, or KPA * 6 Boost presets, individually programmable * Unique "scramble" feature with remote switching * Peak boost recall * Air/fuel ratio display in AFR or Lambda (when connected to a wideband oxygen controller) * Separately adjustable overboost and lean mixture warning/boost cut * Touch buttons with user selectable illumination colors * Auxiliary input to switch boost presets or activate scramble * 1/2 DIN size casing, fits standard stereo slot * Supplied with MAC 3-port solenoid
( 1 )
$396.00
$356.40
On Sale
These AEM Electronics boost control solenoid kits will not degrade rich fuel mixtures like most common boost control solenoids. This will significantly extend life and eliminate the chance of sticking from contamination. They are pressure-tested to an amazing 100 psi and will not leak. AEM Electronics boost control solenoid kits include -4 AN fittings so that you can securely attach wastegate lines without worrying about leaking at the connection. AEM also includes the barb-style hose fittings where push-on fittings are required.
( 5 )
$135.95
$122.35
Turbosmart Gen-V Pro-Gate electronic wastegates feature a Gen-V wastegate body, so you can be confident the mounting orientation will match your existing manifold and outlet hardware. Built on the successful class leading Gen-V Comp-Gate 50 architecture, these units have stellar flow capacity and heat handling characteristics, as well as unparalleled control. There are no springs or hoses and no boost reference signal, nor any of the limitations associated with any of them. Gone are minimum boost levels associated with base spring pressure or heat related issues with hoses. If your manifold priority is good enough, you can set your boost anywhere from zero up to "all of it" from a laptop or tuning interface. Additional features: * Aluminum and cast stainless steel construction * Black anodized finish on top cap * Nitronic 40 valve guide and high-temperature 347 SS body * Liquid cooled, electronic actuator * Strap-type V-band clamps * 1/8 in. NPT * User adjustable actuator position * Onboard analog 0-5 V wastegate position sensor * Onboard analog 0-5 V actuator temperature sensor
Not Yet Reviewed
$1,128.95
The BlackBox by Turbosmart is a dedicated electronic wastegate controller which can be used in cooperation with a range of factory, aftermarket, and Motorsport ECU's. The BlackBox wastegate controllers provide protection from the current demands and translation of basic, as well as more advanced boost control strategies into a gate position and can be used on single, or twin electronic wastegate systems for the ultimate in boost control. The BlackBox is a dual-channel, high-current capable H-bridge driver for use with the Turbosmart range of electronic external wastegates—including the StraightGate50, as well as Turbosmart's electronic poppet style gates including CompGate40, HyperGate45, ProGate50 and PowerGate60 electronic Wastegates. Additional features and benefits: * Capable of multiple strategies, the BlackBox will accept PWM (Pulse Width Modulation) inputs as used for traditional boost control solenoids, 0-5 V position target, CAN position target and CAN bus override for more advanced ECU's where control strategy can be developed natively * The Blackbox provides for auto-calibration of Electronic External Wastegates via a full sweep and includes over temp safety features using the temperature sensor inputs * The BlackBox is pre-configured with the flow vs. lift calibration data of all Electronic Actuated Wastegates from Turbosmart for simple setup and accurate boost control * Settings can be adjusted via a simple USB connection and PC based application and unlimited control strategies can be implemented with the CAN based override system where your strategy is limited only by your ECU's capability
Not Yet Reviewed
$624.95
DIYAutoTune electronic boost control solenoid kits can be used with the MS3-Pro/MSPNP as well as any DIY MegaSquirt EMS (with the appropriate mods), or with other electronic boost controllers to control boost by adjusting the pressure to a turbo wastegate. The MS3Pro, MS3X, MSPNP, and DIYPNP can drive these solenoids directly. The boost control solenoids operate on a frequency of 19.5 to 40 Hz and is practically a wire-in replacement for the now-discontinued GM EBC solenoid. They usually need a slightly lower duty cycle than the GM valve; if you're replacing a GM valve, DIYAutoTune recommends cutting back your duty cycles by 30 percent and then carefully testing and adjusting as needed. The kits include 1/8 in. barb fittings and mounting hardware.
( 1 )
$62.99
Turbosmart's much anticipated Gen-V electronic wastegates are available in Hyper-Gate (45mm, 120 psi) and Power-Gate (60mm, 80 psi) models. The Gen-V external line introduced modular architecture, allowing a rotatable diaphragm housing, optional water cooling, and the ability to swap actuator housings between gate sizes. These new models offer all the flow and interchangeability—with the kind of control never seen before, independent of any reference signal, without the need for compressed gas or boost lines. They're fully adjustable from your tuning interface; no need for changing springs. Boost control is completely adjustable from your laptop. As boost control strategies become more complex, Turbosmart engineers wanted a solution that maintains all the performance and reliability of the Gen-V range—and adds truly infinite control. These electrical wastegates operate on a current draw while providing fast and efficient boost control against up to 80 psi drive pressure (for the eWG60) and over 120 psi (for the eWG45). As with the Gen-V range, there is a provision for optional water cooling. Order the Gen-V model that best suits your performance needs.
Not Yet Reviewed
$1,306.95
Turbosmart StraightGate50 eSG50 electronic wastegates are boost control reimagined! Being a 50mm (1.97in) butterfly valve-style external wastegates for turbocharged engines, the StraightGate50s provide more flow than any conventional 60mm poppet-style valve. They also provide more control and almost linear response for unparalleled boost control throughout the entire operating range. Additional features: * Full electronic control * Liquid actuator cooling provision * Strap-type, V-band clamps * User-adjustable actuator position * Endless boost control strategies * Onboard (0 to 5 V) actuator temperature sensor * Onboard (0 to 5 V) valve position sensor * 7-wire, unterminated flying lead loom
Not Yet Reviewed
$1,432.95
ATS Diesel Performance electronic fuel regulators are designed to allow you to utilize your turbochargers full potential without the truck's computer reducing fuel when it gets that extra boost you've been looking for. They will allow higher boost pressures while maintaining the factory fuel pressures. This is essential when doing any turbo modifications. When the turbo produces boost pressure over stock, the engine will then reduce fuel.
( 4 )
$74.99
These Turbosmart FCD-2 electronic boost fuel cut adjusters are designed to alter the output of a factory 5 V MAP sensor or AFM at an adjustable level to accurately raise the factory fuel cut point. They feature LED indicators for an easy setup and have an adjustable release, ensuring that you retain the safety of having a fuel cut to protect your engine from over-boosting. The Turbosmart FCD-2 electronic boost fuel cut adjusters are suitable for most turbocharged cars and are designed to be used in conjunction with a Turbosmart boost controller.
Not Yet Reviewed
$200.95
Turbosmart Gen-V Comp-Gate electronic wastegates are built on the successful, class leading Gen-V Comp-Gate 40 architecture. Starting with a Turbosmart Gen-V wastegate body, you can be confident the mounting orientation will match your existing manifold and outlet hardware. The Gen-V Comp-Gate 40 already had class leading flow capacity and heat handling characteristics. There are no springs, no hoses and no boost reference signal, nor any of the limitations associated with any of them. Gone, are minimum boost levels associated with base spring pressure or the heat related issues with hoses. If your manifold priority is good enough, you can set boost anywhere from zero up to "all of it" from your laptop or tuning interface. Additional features: * Aluminum and cast stainless steel construction * Black anodized finish on top cap * Nitronic 40 valve guide and high-temperature 347 SS body * Liquid cooled, electronic actuator * Strap-type V-band clamps * 1/8 in. NPT * User adjustable actuator position * Onboard analog 0-5 V wastegate position sensor * Onboard analog 0-5 V actuator temperature sensor
Not Yet Reviewed
$981.95
N2MB Racing offers innovative electronics for your performance car—including their boost boxes. They act as a controller for the Dodge Neon SRT-4 that allows different boost settings for each gear to help maximize traction. Gain the upper hand in your race circuit competitions with N2MB Racing electronic boost controllers!
Not Yet Reviewed
$219.00
On Sale
Go Fast Bits D-Force Diesel Electronic Boost Controllers are the perfect partner for all turbo diesel engines that use a pneumatic wastegate. With six boost presets and a timed scramble feature that can be selected on-the-fly, the D-Force can adjust your boost for all driving conditions—such as overtaking, towing, economy, racing, or even protecting the engine. As any modified turbo diesel owner knows, it's important to monitor EGT (Exhaust Gas Temperature) to avoid costly engine damage. Not only can the D-Force control your boost, but it can also display EGT! No other EBC offers the features, control, and ease of use like the D-Force. Order the D-Force with or without an EGT sensor. Additional details: D-FORCE GIVES YOU ULTIMATE CONTROL OF YOUR BOOST PRESSURE! Want to adjust boost for towing? Change it if EGT gets too high? Have multiple settings for different driving conditions? Bring boost on earlier or hold it longer? The D-Force can do all of this and more! Using a unique boost control strategy, D-Force lets you adjust the boost rise rate, peak boost, and closed-loop correction. There are six boost presets (plus an extra one dedicated to the scramble feature) that you can set up with different boost parameters for different driving conditions, and then activate them on-the-fly or at the press of a button. The unique scramble feature can be set up for a variety of purposes. It can raise or lower boost when activated with the screen button, or via the auxiliary input using a switch, button, or ECU output. For example, you could use it to lower boost pressure for safety by connecting it to an existing warning light, or instantly access high boost by pressing a button or flipping a switch. * The D-Force can also display Exhaust Gas Temperature and has a user-adjustable warning. This feature requires the EGT plug-in module, which includes a stainless steel EGT probe and weld-on exhaust bung, along with the module to connect it to the D-Force wiring loom. The D-Force kit is available with or without the EGT plug-in module, and the module is also available separately. * The controller interface is easy to use with touch-buttons and one-touch menu navigation. The boost pressure units can be displayed in psi, bar, kPa—and the peak recall feature lets you see your peak boost after each boost event. * 50 psi capability! * Closed-loop boost control strategy—for the fastest possible boost rise rate and minimum drop off at high RPM, the adjustable closed-loop logic helps prevent boost variations that can occur in different gears, RPM ranges, and atmospheric conditions. * Remote input trigger: Connect the remote input wire to a switch, button, warning light or ECU output to change boost presets or activate scramble boost. * Over-boost warning/cut: User adjustable warning to indicate if the boost pressure is too high and to cut the solenoid to lower boost and protect the engine. * Touch screen interface with simple menu navigation: Capacitive touch screen and single-touch menu navigation makes setup exceptionally easy. Scrolling text also means you always know where you are in the menu. * Choose your screen color: You can set the button illumination to any one of six different colors to match your car's dash.
Not Yet Reviewed
$396.00
—
$513.00
$356.40
—
$461.70
Turbosmart Gen-V electronic anti-lag valves are perfect for motorsport and high-performance applications featuring fully electronic actuation, removing the need for the solenoids and tanks of traditional pneumatic systems. They feature a 40mm valve diameter and purpose designed actuator housing. Multiple fittings are also supplied for ease of fitment and fabrication. The fresh air valve allows incoming charged fresh air from the turbo to be diverted safely into the exhaust manifold pre-turbine wheel with throttle at low opening angles. This allows for safer spooling of the turbocharger without potentially damaging the throttle based late combustion event style anti-lag that can induce high engine stresses and break connecting rods. For engineered performance, choose Turbosmart.
Not Yet Reviewed
$1,091.95
Manufacturer Rebate
Putting together the most advanced feature sets ever seen in boost controllers, AutoMeter has redefined the category. These AutoMeter electronic boost controllers are packaged in a familiar and easy-to-install 2 1/16 in. gauge housing. They offer some of the most powerful functions ever assembled for safely extracting the most performance possible from your forced-induction application, and the level of precision, response, and durability that racers have come to trust within the AutoMeter performance instrument range. Intuitive programming menus operated right through the controllers (no separate software or interface modules are required) make setup and use incredibly easy. Power is nothing without control. They are specifically designed for turbocharged gasoline engine combinations running up to 30 psi of boost pressure. AutoMeter electronic boost controllers feature: * High/low boost modes: pre-program and set two different configurable boost settings that can be switched between on-the-fly with the push of a button, perfect for performance track day cars and racing applications * Boost by rpm/boost by gear: integrating AutoMeter's most advanced digital tachometer circuit, your boost curve can be tuned precisely by 500 rpm increments to minimize wheel spin and put more power to the ground * One-touch gear capture: instantly capture each gear with the push of a button; drive normally in your chosen gear and hit the capture button * Peak boost recall: one-touch recall of the highest boost pressure achieved during a given time * Configurable warnings with overboost protection: easy-to-set parameters provide a full face flashing warning if boost pressure moves beyond your settings to quickly alert the driver. The warning doubles in speed if boost pressures exceed your programmed settings by 2 psi or more * Pro control output: using your programmed high and low boost settings, the AutoMeter boost controllers can automatically trigger external devices such as water methanol injection, intercooler sprayers, nitrous solenoids, or other devices that can be activated via relay * Pro control input: can also be controlled by external devices, any ground signal sent to the pro control input will immediately back boost levels down wastegate spring pressure * Display: highly versatile boost pressure reading units represented on the digital LED display can be selected via the user button interface * Data logger output: configurable scale 0-5v analog voltage output in either PSIA or PSIG allows for signal sharing/boost readings with other performance electronics, such as data acquisition systems or engine control units * Tach/speed signal diagnostic: onboard real-time diagnostics to verify the presence and correct operation of both of these inputs
Not Yet Reviewed
$473.99
—
$485.99
PRODRAG boost control solenoids are available in 3- or 4-port models. Solenoid valves regulate the amount of boost pressure in a turbocharged or supercharged engine. They allow the pressure that's supplied to the diaphragm to be controlled by the ECU by venting some of this pressure. These kits include a boost control solenoid, 2-way WeatherPack female connector, two WeatherPack pins, and two wire seals.
Not Yet Reviewed
$99.99
—
$124.99
PRODRAG injector boost controllers are the fastest and most accurate way to control boost. Utilizing an injector for moving boost increase and decrease individually allows for very fine adjustments—along with the ability to hold an exact amount of boost down the track. These controllers can be used for standard manifold referenced boost control as well as C02 and compressed air setups. The units are compact for mounting in tight areas, and feature an 1/8 in. NPT inlet and dual 1/8 in. NPT outlet ports. Each kit comes with a billet block assembly machined in house using USA sourced aluminum with a black anodized finish, two FID 2000cc injectors, 2x injector plug/pin kit, and mounting hardware.
Not Yet Reviewed
$549.99
Manufacturer Rebate
Innovate SCG-1 boost controllers integrate the industry-leading DirectDigital wideband air/fuel ratio technology. The company paired its advanced oxygen sensor control technology with its all-new proprietary solenoid control that provides superior boost control accuracy, response, and safety. A user-programmable shift light was added, with the entire package housed in a compact gauge body for ease of installation and use. As with all of Innovate's air/fuel ratio products, the SCG-1 boost controllers utilize only 100 percent digital wideband air/fuel ratio technology to provide real-time feedback to the SCG-1. This air/fuel information is displayed on an integrated OLED display, along with manifold pressure and wastegate duty status. The air/fuel ratio information is also used to provide a user-definable boost cut that enhances the safety margin over most competitors' offerings which rely only on overboost threshold. Innovate SCG-1 boost controllers have a full-programmable analog output, ideal for applications using standalone ECUs, piggyback ECUs, or external data loggers.
( 3 )
$420.99
Install smarter boost management with Turbosmart e-Boost 2! These electronic boost controllers give you ultimate control over the boost curve with smart features designed to get results. Engineered to win, Turbosmart e-Boost 2 boost controllers lead the class with 60 psi max boost operating pressure. They allow you to control, monitor, map, and compensate boost, plus control water spray, methanol or nitrous injection, manage shift/warning lights, and read/monitor rpm! Their state-of-the-art software is easy and logical to use, so you can confidently control all aspects of the boost curve--set point, gate pressure, and sensitivity. Whether you have a top-level racer or street-going vehicle, if it's turbocharged, make it Turbosmart-charged with Turbosmart e-Boost 2 boost controllers!
( 2 )
$660.95
—
$723.95
On Sale
Okay, yes, there are times you wish you could have that signature turbo blow-off sound, but not all the time. Go Fast Bits Deceptor Pro II TMS direct-fit motorized blow-off valves deliver just what you need—the ability to control how loud your BOV sound is, from the driver's seat. Featuring GFB's patented Venting Bias Adjustment System, coupled with remote electronic control, Deceptor Pro II units allow you to infinitely vary how much air is recirculated, and how much is vented to atmosphere. So, if your car typically suffers issues, such as backfiring and stalling when venting more than a certain percentage of air to atmosphere, the controller can easily be configured to limit the maximum venting ratio. This way, you can achieve a blow-off sound without having to put up with the issues. GFB Deceptor Pro II features and benefits: * Adjust your BOV venting bias electronically on-the-fly * Revised porting to optimize flow and venting bias * Compact design fits in most factory valve locations * Bore finishing process ensures a lifetime of reliable operation * Direct bolt-on for most vehicles available * Remote proportional venting bias/volume control- from silent to loud or anywhere in between * Sleek, compact in-car BOV volume controller with backlit dial * End-point adjustment to control maximum vent to atmosphere bias setting * Volume adjustment mechanism driven by a high-torque geared electric motor * Durable, low-friction gear train supported by precision sealed ball-bearing * Supplied with all parts and wiring required to have it up and running quickly and easily
Not Yet Reviewed
$453.60
—
$805.50
$408.24
—
$724.95
The Tuning School Atlas Max boost controllers are positive displacement boost controllers that install easily with plug-and-play connections. They take all the features of the Atlas, and put you in control. With the turn of a dial you can control how quickly boost ramps in and by how much. The controller modifies the bypass valve control, utilizing boost/vacuum reference and a MAP sensor, as well as a smart processor, adjusting the ramp in rate of the positive displacement blower. A few simple plug-and-play connections and a small mounting bracket to hold the Atlas in place is all it takes. Turn the dial down and create a slower, smoother transition into boost--great for daily driving. Turn the dial up, and ramp into boost more quickly for that sportier feel. The fine-tuning controls can be mounted inside the cabin, for on-the-fly instant adjustment. Order The Tuning School Atlas Max boost controller designed for your supercharger.
Not Yet Reviewed
$849.00
—
$899.00
On Sale
MSD Power Grid boost controllers let the driver regulate the amount of boost pushing air into the engine. These controllers allow you to devise a timing map based on boost pressure, and map entire runs with advanced View software. Values are based on pressure sensors, including a 4-BAR internal, which is good through 43.5 psi. The units include a safety overboost shut-down feature and boost pressure activation output. (To use any modules with the Power Grid system, users must plug the modules into a 4-connector CAN-Bus hub to be attached to the Power Grid system controller). For optimum control of boost, use MSD Power Grid boost controllers.
( 1 )
$1,549.95
$1,393.95
Turbosmart Kompact EM dual port blow-off valves vent to the atmosphere and back into the air intake. These EM (Electro-Mechanical) BOVs are true plug-and-play upgrade replacements featuring a leak-proof design, lightning fast actuation, and higher pressure handling capabilities, making them high performance substitutes for your factory plastic units. They also allow you to retain complete OE control of their operation. Turbosmart Kompact EM dual port blow-off valves are all-billet CNC construction with high temperature seals and the latest patented technology. They are must-haves for hybrid or larger flowing turbos that utilize OE electronic diverter valves. By not leaking, the EM will achieve target boost without stressing the turbocharger and wastegate. Key features include: * Patent pending integrated pressure control * True plug-and-play upgrade * Integrated proprietary high-temperature solenoid valve * Billet construction with high-temperature O-rings
( 2 )
$303.95
—
$576.95
Precision Turbo and Engine Gen2 wastegates are high-quality, economical, and perfect for the automotive enthusiast looking to get the most from their turbocharged car, truck, or any other vehicle. PTE's Gen2 external wastegates are fully adjustable, designed to be direct-fit replacements for other units on the market, and compatible with most aftermarket manual or electronic boost controllers for ease of use. Features: * High-grade, high-temperature stainless steel and billet aluminum components for the best in strength, style and functionality * A 347 stainless investment cast valve body to provide consistent performance without fatigue or failure, while also allowing for accurate boost control * An internal Nickel Chromium alloy valve * Several different 17-7 precipitation hardened springs for further adjustment of boost levels * Standard clamp-style configuration for easy mounting * A satin black anodized finish with 6061 aluminum billet cap * All clamps necessary for installation * Warranted to be free from manufacturers defect for a period of 12 months or 12,000 miles
Not Yet Reviewed
$324.79
—
$481.59
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
