Availability
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because...
Superchargers and turbochargers are an incredibly popular way to make gobs of power and maximize the efficiency of your vehicle—and Summit Racing Equipment has the best selection around! Let’s break down the main differences of each, so you can figure out what route to take on your own ride!
Superchargers are driven directly by your engine. They are attached to your crankshaft by a belt, so as engine speed increases, so does your supercharger speed. You can increase or decrease the speed of the supercharger by changing the size of the pulleys, allowing you to fine-tune your boost to the desired level. Because of their relationship to engine speed, superchargers commonly provide a power curve that increases with engine rpm, delivering boost with rapid response.
There are two main styles of superchargers: Roots and centrifugal. Roots-style superchargers use a pair of rotors within a housing to force air at higher than atmospheric pressure into your engines. The rotors can have a varying number of lobes and may be twisted, affecting how the air flows through the supercharger. Centrifugal style superchargers utilize a gearbox to spin a shaft, which is connected to compressor wheel, drawing in ambient air and compressing it on its way to the engine.
Turbochargers utilize the exhaust gases produced by your engine to spin a turbine wheel located inside the turbocharger housing, which is connected to a compressor wheel by a shaft. As the two wheels turn, ambient air is sucked into the turbocharger’s compressor inlet and pushed into the engine. That air charge is often passed through an intercooler to increase its density.
Choosing the right turbocharger kit for your vehicle can be daunting, with factors like tubing size, A/R ratio, and multiple other factors to consider. However, Summit Racing makes it easy by offering turbocharger kits custom-designed for a wide range of vehicles, so you can get all the benefits without major engineering work.
For even more helpful information about the difference between superchargers and turbochargers, check out this helpful article at OnAllCylinders.com.
Summit Racing has everything you need to take your engine’s performance to the next level with a complete supercharger or turbocharger kit. If you’re looking for a complete, pre-designed, bolt-on solution, we’ve got you covered. But if you want to take the plunge into every aspect of blow off valves, wastegates, piping, intercoolers, boost controllers, and more, we can help you there, too. Summit Racing only carries quality parts from trusted brands like Precision, Garrett, Turbosmart, Turbonetics, Edelbrock, Magnuson, ProCharger, and more, so you can complete your supercharger or turbocharger build with confidence.
Showing In Stock Items. Show All 17 Items.
If you're seeking exciting performance out of a drop-in-and-go unit, then you need Fleece Performance Cheetah FMW HX35 turbochargers. They feature a high-flow turbine wheel, a 63mm FMW compressor, and reduced EGTs. These turbos do not require specialized tuning, and yet they provide quick response, excellent overall drivability, and support up to 650 RWHP. Whether you want more seat-of-the-pants performance, or torque for towing, Fleece Performance Cheetah FMW HX35 turbochargers have you covered. Important application information: Customers with 1994-2002 vehicles need to look at the pictures of part numbers FLE-FPE-HX35-GTC, -LWG, and -SWG and compare the wastegate orientation and bracket on stock units to find the correct turbo. Refer to the Notes section for additional information.
Not Yet Reviewed
$1,699.00
Turbosmart Gen-V HP (high-pressure) comp-gate external wastegates feature a new unique appearance, Gen-V architecture, more options, and more boost. Upgrades include their modularity, improved thermal management, water cooling options, and even more gate flow than ever before. Turbosmart answered the needs of the diesel tuning community years ago with their HP wastegate range. These Gen-V units take all the advances in design and entineering—such as water cooling, rotating housing, industry-leading gate flow, and 1/8 NPT reference ports—and pushes the results to new heights. The new Gen-V HP springs options alone mean as much as 50 psi of base spring pressure. Included in the box is the new Gen-V HP mechanical wastegate with 35 psi worth of pre-loaded springs (10 psi inner and 25 psi outer), all inlet and outlet weld flanges, valve seat and clamps, and basic reference port fittings needed to get set up and running. These wastegates are available in different external relief diameters.
Not Yet Reviewed
$576.95
—
$634.95
You're in the driver seat for boost control with Turbosmart! Their in-cabin boost controllers provide enthusiasts like you with boost adjustment on the run! Turbosmart manual boost controllers are manufactured from high-grade brass and aluminum, easy to install, and offer the most cost-effective way of controlling the amount of pressure going to your wastegate. In-cabin controllers feature a detent system for ease of adjustment and a gated system to bring the boost on faster. Turbosmart in-cabin boost controllers are strong, lightweight, and they put you in control from the driver seat of your turbo machine.
Not Yet Reviewed
$138.99
—
$145.95
GFB offers a range of high-flowing external wastegates that are small—the most compact size in their class—but are big on flow! These external wastegates are built to cope with the extreme conditions and the harsh environment that's associated with high-boost and exhaust temperatures. Key features include: * Most compact wastegate range on the market for easy installation in tight locations * Body, valve, seat and all mounting hardware is CNC-machined from high-temp stainless steel * Actuator housing CNC-machined from billet 6061 aluminum * Nomex-reinforced silicone diaphragm * Internal shroud protects valve stem from excessive heat and prevents carbon-related sticking * V-band clamp mounting system * Made in Australia under ISO 9001
Not Yet Reviewed
$364.50
—
$594.00
Okay, yes, there are times you wish you could have that signature turbo blow-off sound, but not all the time. Go Fast Bits Deceptor Pro II TMS direct-fit motorized blow-off valves deliver just what you need—the ability to control how loud your BOV sound is, from the driver's seat. Featuring GFB's patented Venting Bias Adjustment System, coupled with remote electronic control, Deceptor Pro II units allow you to infinitely vary how much air is recirculated, and how much is vented to atmosphere. So, if your car typically suffers issues, such as backfiring and stalling when venting more than a certain percentage of air to atmosphere, the controller can easily be configured to limit the maximum venting ratio. This way, you can achieve a blow-off sound without having to put up with the issues. GFB Deceptor Pro II features and benefits: * Adjust your BOV venting bias electronically on-the-fly * Revised porting to optimize flow and venting bias * Compact design fits in most factory valve locations * Bore finishing process ensures a lifetime of reliable operation * Direct bolt-on for most vehicles available * Remote proportional venting bias/volume control- from silent to loud or anywhere in between * Sleek, compact in-car BOV volume controller with backlit dial * End-point adjustment to control maximum vent to atmosphere bias setting * Volume adjustment mechanism driven by a high-torque geared electric motor * Durable, low-friction gear train supported by precision sealed ball-bearing * Supplied with all parts and wiring required to have it up and running quickly and easily
Not Yet Reviewed
$453.60
—
$805.50
Go Fast Bits Deceptor Pro II With Mach 2 Motorized Blow-Off Valve Combos deliver all the performance—with or without the noise! Give your Kia Stinger the sound you want and the performance to go with it. This is a combination kit for the Stinger that mixes the valve types. Since both valves are fed from a common chamber, and there is no MAF sensor, it's no problem to mix and match valve types and venting bias. The combo includes one Deceptor Pro II AND one Mach 2, which still allows you to adjust the venting sound, but at a more affordable price than the twin Deceptor Pro kit. You can adjust the volume of your sound system from the driver's seat, as well as your Stinger's exhaust sound—so why not the BOV sound too? The Deceptor Pro II features the same patented Venting Bias Adjustment System as the Respons TMS, but adds electronic in-cabin adjustment so you can change how loud the BOV venting sound is from the driver's seat! To top it off, if your car typically suffers issues such as backfiring and stalling when venting more than a certain percentage of air to atmosphere, the controller can easily be configured to limit the maximum venting ratio.
Not Yet Reviewed
$625.50
FAST Gen III Hemi Supercharger/Camshaft Power Packages provided the perfect paring of products for enthusiasts to gain a 1,000+ hp potential from their Dodge. These Power Packages feature Edelbrock's 2650 TVS supercharger with patented, dual-pass, 3-core integrated intercooler, and COMP Cams' LST camshaft designed for supercharger applications. FAST Gen III Hemi Power Packages have all the basics required to install the supercharger, but necessary accessory items such as fuel injectors, air intake, and heat exchanger pump are left up to the installer, providing total flexibility for custom installations. FAST Edelbrock/COMP Cams Power Packages include: * 2650 TVS supercharger--patented integrated intercooler with 45 percent more cooling area and the ability to generate major power gains through lower inlet air charge temperatures * Supercharger pulleys: -- 3.500 in. is pump gas-friendly supercharger pulley for engine break-in, initial tuning, and general performance driving -- 2.625 in. when maximum power is desired on race fuel or E85 * Accessory drive pulleys * Fuel lines and rails * Low Shock Technology camshaft * Phaser limiter * Pushrods * Conical valve springs * Chromoly steel retainers * Valve locks and seals * Spring seats and shims * Installation hardware
Not Yet Reviewed
$9,279.95
Clearance
Pure Energy remanufactured turbochargers are built to the strictest quality standards, implementing design enhancements that improve durability, efficiency, and power. These stringent testing and evaluation processes assure proper performance and reliability standards are met. Pure Energy turbochargers are supported by a free tech support hotline, staffed by ASE certified master technicians with access to extensive vehicle-specific repair data. Quality enhancements include: * Precise dual plane balancing of turbine shaft and compressor wheel eliminates high-speed vibrations, premature shaft and bushing/bearing failures, and assures quick spool up * New OEM design or upgraded CHRA (Center Housing Rotating Assembly) internal components assure reliability and durability * Thrust plates, seating rings, and journal bearings are strategically designed to withstand internal oil pressure and improve lubrication * Electronic and pneumatic actuator function is tested, calibrated, and adjusted for proper pressure relief and boost functions * Mechanical fastener and tolerance verification—all critical points are measured, gauges, torques, and witness marked * Assembly line and end-of-line testing--multi-computer and mechanical test operations monitor the turbo performance
Not Yet Reviewed
$658.99
—
$1,144.99
$479.50
—
$699.50
Clearance
Pure Energy new turbochargers are engineered and built for performance, efficiency, and power. Assembled to the highest quality standards, their new turbochargers go through strict test and evaluation processes to assure proper performance and reliability standards are met. Pure Energy turbochargers are supported by a free tech support hotline, staffed by ASE certified master technicians with access to extensive vehicle-specific repair data. Quality enhancements include: * Precise dual plane balancing of turbine shaft and compressor wheel eliminates high-speed vibrations, premature shaft and bushing/bearing failures, and assures quick spool up * New OEM design or upgraded CHRA (Center Housing Rotating Assembly) internal components assure reliability and durability * Thrust plates, seating rings, and journal bearings are strategically designed to withstand internal oil pressure and improve lubrication
( 2 )
$482.99
—
$720.99
$397.50
—
$576.50
aFe tubing couplers are designed to connect two sections of pipe and allow for small movement. They are manufactured from polyurethane, so they seal nicely around the tube for a proper hold, and are flexible enough to handle minor engine vibration. The couplers also feature built-in hose clamps for the correct clamp seating.
( 14 )
$325.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
