Availability
Showing In Stock Items. Show All 27 Items.
Vortech supercharger oil feed fittings will mount into the supercharger head unit and allow the oil to enter the case. They are manufactured from high-quality brass material and are designed to fit all Vortech centrifugal-style superchargers.
( 8 )
$91.99
Put the finishing touches on your truck with high-quality Fleece Performance turbo drain tube kits. The tubes are braided stainless steel for durability on the exterior, and reinforced with rubber tubing for flow and maximum flexibility. The kits contain everything you need to connect an S300/S400 turbo drain back to the factory drain location on the Cummins block when using a fixed vane geometry turbo. Kit contains: * Drain tube (20 in. end-to-end) * Cummins turbo drain tube adapter * Turbo drain flange adapter * Turbo drain gasket * 7/8 in.-14 to -10 AN fitting * Two 3/8in.-16 flange head bolts * Two 10mm x 1.5 flange head bolts
( 3 )
$99.95
Fleece Performance turbo oil feed lines ensure that your system gets an adequate oil supply. They offer replacements for your OE setup, as well as remote kits that prevent premature bearing failures. All include extra-flexible, smooth bore PTFE hose and high-quality fittings. The remote kits will also include a stock oil feed plug and an oil galley rifle fitting. Whether you're replacing or upgrading, Fleece Performance turbo oil feed lines are available for your application.
( 1 )
$69.99
—
$99.99
ICT Billet turbo oil feed lines feature a PTFE core with a braided stainless steel outer jacket. They include pre-installed -4 AN hose ends: one 90 degree female and one straight female. They are available in different lengths to help you with your project, from start to finish.
( 10 )
$54.99
—
$58.99
Set it and forget it with Turbosmart boost tee boost controllers! These smaller and lighter manual boost controllers offer precision power, durability, and the biggest bang for your buck. Turbosmart boost tee controllers are easy to install and are cost-effective in controlling the amount of pressure going to your wastegate via their gated boost control valve. Built from high-grade brass and aluminum, these controllers allow for easy boost adjustment from under the hood with their accurate, proven detent system. Under the hood boost tees are ideal for many applications from mild to wild! Improve your turbo response and performance with Turbosmart boost tee boost controllers.
( 1 )
$103.95
Summit Racing™ 50MM blow-off valves are a pressure release system that takes the load off your turbocharger when the throttle is suddenly closed, preventing damage to both the turbo and your engine. These valves are adjustable from 0 to 50 psi, making them ideal for most boosted applications. Machined from aluminum and black anodized for durability, these blow-off valves offer a quality look for any turbo setup. They include vacuum fittings, aluminum weld flange, V-band assembly, and springs.
( 15 )
$69.99
Summit Racing™ boost control solenoids are simple universal 12 V activated solenoid valves that you can use to control your boost pressure. They can be used with any engine control system or boost controller and allow you to vent or route pressure to or from your wastegates. They include the solenoid, 1/4 in. hose barb fittings, and a vent.
( 1 )
$61.99
Changing the blower oil on your ProCharger supercharger just became easier and less messy with these easy-to-install self-contained drain line field upgrade kits. They include complete instructions, 24 in. drain line, oil drain fitting, O-rings, and gaskets. The kits are available with either a straight or 90 degree angle fitting. (Fits all ProChargers except A1 and C1A.)
Not Yet Reviewed
$79.00
These Vibrant Performance oil drain kits are designed to work with multiple turbos, such as T3, T4, and GT Series turbos. They include braided stainless steel hose lines, oil pan bungs, an aluminum oil drain flange, and all other necessary oil drain fittings. If you're in need of an oil drain kit, Vibrant Performance has you covered.
( 2 )
$74.99
—
$84.99
Granatelli Motor Sports' 50mm blow-off valves feature a 50mm design, compact size, and lightweight construction. These pressure release systems are designed to take the load off your turbocharger when the throttle is suddenly closed to help reduce the risk of damage to both the turbo and your engine. These BOVs are adjustable, making them ideal for many boosted applications. These 50mm blow-off valves are machined from top-grade aluminum and black anodized for added durability, and include the vacuum fittings, aluminum weld flange, the spring, and V-band assembly.
( 1 )
$74.81
Feed your supercharger with Vortech oil feed assemblies. Designed for a perfect fit in several applications, these assemblies include an oil feed hose, crimp ferrules, and the necessary fittings to do the job. And Vortech's red hose and brass fittings look great under the hood.
( 10 )
$69.99
—
$110.99
Mishimoto manual boost controllers are constructed from high-quality 6061 anodized aluminum and stainless steel, sure to withstand the harshest of environments in your engine bay. The anodized aluminum body and stainless steel internal components are designed to provide you with a lifetime of service. The stainless steel ball detent system will ensure that your boost level is consistent and stays exactly where you set it. Easily adjust boost levels from under the hood with the turn of a knob and no additional tools. The knurled stainless steel adjustment knob makes it quick and easy to adjust. CNC-machined stainless steel fittings ensure boost reference lines stay secure and leak-free. Mishimoto manual boost controllers are easy to install and offer an effective solution to get better turbo response and increased boost levels. Each unit includes a universal mounting bracket to keep your boost controller safe and secure in the location of your choosing. Available in a black or gold anodized finish.
Not Yet Reviewed
$83.95
DIYAutoTune electronic boost control solenoid kits can be used with the MS3-Pro/MSPNP as well as any DIY MegaSquirt EMS (with the appropriate mods), or with other electronic boost controllers to control boost by adjusting the pressure to a turbo wastegate. The MS3Pro, MS3X, MSPNP, and DIYPNP can drive these solenoids directly. The boost control solenoids operate on a frequency of 19.5 to 40 Hz and is practically a wire-in replacement for the now-discontinued GM EBC solenoid. They usually need a slightly lower duty cycle than the GM valve; if you're replacing a GM valve, DIYAutoTune recommends cutting back your duty cycles by 30 percent and then carefully testing and adjusting as needed. The kits include 1/8 in. barb fittings and mounting hardware.
( 1 )
$62.99
Vibrant Performance blow-off valve weld-on flanges make it easy to weld blow-off valve flanges to your induction plumbing. They come complete with a radiused weld-on fitting that is threaded so that you can screw on the mating flange, as well as an O-ring, for a leak-free seal. These components are made of high-quality aluminum to ensure a high level of performance. If you need a blow-off valve weld-on flange, Vibrant Performance has you covered.
( 6 )
$69.99
Clearance
Rein Automotive intercooler hoses are designed to be direct replacements for worn OE hoses and hose assemblies, and are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings. These application-specific turbo cooling hose components are manufactured to strict engineering standards and specifications in quality materials and come in applications to fit European vehicles the way the original manufacturer intended. Order the model suited to your application.
Not Yet Reviewed
$55.99
—
$75.99
Rein Automotive OE-quality turbo cooling hoses fit European vehicles the way the manufacturer intended. They are designed as direct replacements for factory hoses and hose assemblies, from the size and shape of their branches to the quick-connect fittings. The rubber hoses require no cutting, refitting, or adjusting—and they're resistant to heat, salt, road debris, oil, and other contaminants. And these turbocharger coolant lines prevent leaks and comebacks from reusing old quick-connectors and O-rings. Order the model recommended for your specific vehicle and engine application.
Not Yet Reviewed
$54.99
—
$75.99
These Turbosmart FCD-1 pneumatic boost fuel cut adjusters allow for an accurate increase in the factory fuel cutout level without the need for cutting or splicing wires or affecting off-boost conditions. They are designed for use on most turbocharged engines using a MAP sensor. The adjusters can be locked to prevent tampering and include the necessary hose, fitting, and mounting bracket for installation.
Not Yet Reviewed
$103.95
VS Racing X50 blow-off valves are designed for use on large-capacity turbocharger systems and high-horsepower engines. Featuring a 50mm design, small size, and lightweight construction, VS Racing X50 port blow-off valves provide greater performance through faster turbo spool-up from idle, along with reduced turbo lag between gears. VS Racing X50 port BOVs are ideal for circuit and drag vehicles and trucks—so order today!
( 12 )
$78.00
Eliminate the installation headaches associated with non-flexible OE drain lines with Fleece Performance silicone turbo drain tube kits. Each kit features a larger inner diameter, smooth silicone hose for longevity and durability, and black anodized billet aluminum flange with integral O-ring for leak-free performance. Fleece's patent pending drain hose simplifies turbocharger installation and will ensure proper oil drainage from your turbocharger. Kits include new fasteners and are designed for use with all Cummins equipped Dodge Ram factory-style turbochargers, VGT or HX35 and HY35-style turbochargers, as well as aftermarket drop-in replacements, like Fleece's Cheetah Series. Choose the turbo drain line kit designed for your Cummins.
( 3 )
$94.99
Improved Racing multi-port oil sensors will make plumbing an Accusump, sensors, and/or a turbo oil supply line to your LS-Series engine easier. Made from 6061 T-6 billet aluminum and black anodized, these units feature two 1/8 in. NPT ports for sensors and a -8 AN O-ring boss port. They sport a low-profile design that will clear most long-tube headers and will bolt on in place of your factory oil bypass cover, just above the filter. Your kit will include the block, gasket, screws, and steel sensor port plugs. Offering maximum flexibility on your project, Improved Racing multi-port oil sensors deliver options.
Not Yet Reviewed
$79.00
In the long list of turbo failure causes, what ranks toward the top? Oil loss! Dorman turbocharger oil lines help to prevent this issue. They are designed as a direct replacement for an OE fit, and a seamless transfer of lubricant to and from the engine's turbocharger. These lines are of the highest in reliability, as they have undergone strict SAE testing to guarantee they meet or exceed the standards for burst, tensile, cold bend and leakage. Whether you are upgrading your factory turbo, or just want to guarantee the reliability of your ride, you can rest easy by using these Dorman turbocharger oil lines.
( 2 )
$59.99
Rein Automotive offers turbo oil feed pipes in a variety of configurations for applications from the 1990s and up. These direct-fit replacements are manufactured with premium ContiTech OE-quality hose material—designed to withstand the demands of automotive turbo cooling systems. The oil supply lines resist excessive heat, oil, and ozone factors that break down rubber and cause premature failure in turbo cooling systems. They restore your vehicle to safe and optimal performance levels. (The pipes come complete with hardware and seals, when necessary for installation.)
Not Yet Reviewed
$62.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
