Availability
Showing In Stock Items. Show All 22 Items.
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Receive unprecedented value and add up to 75 percent more horsepower to your small block Chevy with these carbureted entry-level supercharger kits. These kits feature the Vortech PowerHat with diffusion technology and they will produce approximately 5 psi at 5,500 rpm on a mildly modified 350 engine. Additionally, most OEM Saginaw-type power steering pumps can be attached to the Vortech mounting bracket by using the supplied hardware in the kits. Smash that pedal and step into the world of superchargers! Vortech carbureted entry-level supercharger kits have you covered. Important information or requirements for the Vortech carbureted entry-level supercharger kits: * These systems were designed to fit on engines equipped with a "long" water pump and OEM V-belt drives or serpentine accessory drives; for correct belt alignment, the proper accessory drive crank pulley and accessory bracketry must be used * Earlier models equipped with short water pumps will require a long water pump to be installed * Quick Fuel, Demon, or Holley 4150-type, 4-barrel carburetor with mechanical secondaries designed for "blow-though" applications (may require rejetting or minor modification) * High performance, boost-referenced fuel pump * Compressor bypass valve * Accessory belts (will vary per application, depending on accessory configuration and supercharger pulley diameters) * Minor (bottom-side) modifications may be required, depending on the vehicle and type of intake manifold installed on the engine
( 5 )
$3,364.99
On Sale
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Their centrifugal supercharger kits feature lightweight aluminum impellers that are heat-treated and high-speed balanced to ensure smooth operation. An O-ring compressor housing seal and an innovative impeller seal improve sealing and reduce friction. Vortech has taken away the headaches of building a custom kit by engineering these kits to have a true OEM-quality fit and finish. Each kit is 100 percent complete, right down to the wire ties. Most kits include a matched compressor supercharger unit with SQ technology for "Super Quiet" operation. A high-flow air intake system with a reusable air filter, heat-resistant silicone hose couplings, and premium-grade flex hose is included as well. Additional features: * Flow-tested cast aluminum and/or urethane air discharge tubing * OEM-style, heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware * Choice of satin or polished finish * Step-by-step, fully illustrated installation manual
( 9 )
$3,633.99
—
$4,215.99
$3,270.59
—
$3,794.39
Wagner Tuning competition intercoolers replace your OEM unit with performance gains and low intake temperatures. Optimized by CAD, most feature lightweight, low restriction tube and fin construction, with a competition high-speed core and cast aluminum end tanks to give these intercoolers excellent cooling properties with less pressure drop. The design was improved further with flow analyses and simulations. Wagner Tuning competition intercoolers deliver an easy fitment and maximized cooling. They are treated with a protective anti-corrosion coating with perfect thermal heat-dissipating characteristics. Order the model designed for your vehicle application.
Not Yet Reviewed
$2,490.00
—
$3,440.00
On Sale
Summit Bucks
Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!
( 2 )
$4,081.95
$3,673.76
On Sale
APR DTR8868 turbocharger systems are direct replacements for the EA839 3.0L turbo engine. These upgrades include matching software for various vehicles and mods, providing up to 620 hp (571 AWHP) and 422 lbs.-ft. of torque (572 AWT), depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even ethanol on the S4, S5, and SQ5 platforms with fueling upgrades. For dedicated race cars, the turbocharger is designed with plenty of headroom to go even further on your own. The APR Stage 3 software is designed to avoid hard-spiking in the lower RPM band or running on the edge of what the factory rods and pistons should handle. Particular attention was paid toward component protections for exhaust gas temperature (EGT), back pressure safety (EMAP), turbocharger discharge temperatures, and fueling system capabilities. As rising exhaust gas temperatures require more fuel, the system will lower lambda to cool EGT without taxing the injection system with excessive on-times. Secondary protections will limit output for safety. The HPFP software helps increase headroom without over-driving the pressure to the injection system. The need for limiting power under extreme prolonged use (like tracking the vehicle), is greatly reduced, and the optional upgraded HPFP dramatically increases ethanol output. Note: Specific software is required to use this system, and an upgrade from lower stage systems is included for various vehicles. Software compatibility must be checked before purchase as the software installs to your vehicle's factory ECU. Currently, software can only be installed by an authorized APR dealer. Software is available in two formats: for use with the stock HPFP or for use with the APR HPFP. Additional APR DTR8868 turbocharger systems features, items, and specifications include: * Does not require a core and no additional downtime * Designed to bolt to factory location with factory-style connections * German dual ceramic ball bearing center section eliminates failure-prone journal bearing design * Smooth and reliable operation with a better transient response * Upgraded compressor cover with matching A/R * Larger aircraft-grade, 6061 billet aluminum 88mm compressor wheel * Turbine housing cast with high-temperature 310 stainless steel * Turbine A/R matched to nickel-based super-alloy K418 high-flow 54mm turbine wheel * Each rotating group is VSR (vibration sort rig) balanced for reliable operation * Includes complete turbocharger with a calibrated wastegate actuator and diverter valve * All necessary single-install hardware, gaskets, and clamps * Intake system adapter provides maximum flow-through as optional upgrade for factory intake * ECU software upgrade designed for factory engine and remains emissions-compliant * Supports 91, 93, 100, and 104 AKII, and E60-E85 in North America * Supports 95, 98, 104, 108 RON, and E60-E85 everywhere else * Integrated DV (Diverter Valve) port with OEM DV included
Not Yet Reviewed
$3,299.95
$2,968.95
On Sale
APR DTR6054 turbocharger systems are direct replacements for the EA888 Gen 3 engine. These upgrades include matching software for various vehicles and mods, providing up to 491 hp and 425 lbs.-ft. of torque, depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even ethanol on the Golf R, S3, and TT S platform with fueling upgrades. For dedicated race cars the turbocharger is designed with plenty of headroom to go even further on your own! Designed and developed from the ground up by APR, DTR6054 turbochargers do not require a core and there's no additional downtime. They are built using an aluminum anti-surge compressor cover with appropriate A/R matched to a larger aircraft-grade, 6061 billet aluminum 60mm compressor wheel, a turbine housing cast with high-temperature 310 stainless steel to take the heat and abuse seen on a road course, and a nickel-based superalloy K418 high-flow 54mm turbine wheel. A German dual ceramic ball bearing center section provides smooth and reliable operation with a better transient response, eliminating the factory failure-prone journal bearing design. Each kit includes the complete turbocharger with compressor inlet pipe, compressor outlet hose, T-bolt clamps, gaskets, O-rings, exhaust ring, exhaust V-band, exhaust manifold gasket, studs, bolts, and washers, oil and coolant line O-rings, and APR's ECU upgrades for select vehicles. The upgrade uses your factory electronic wastegate and diverter valve, and connects to your factory exhaust, intake, turbo outlet pipe, and oil and coolant lines. Tested at various road courses, APR's DTR6054 turbocharger systems do not spike torque hard or run on the edge of what the factory rods and pistons have been known to handle, making them as safe on the stock engine as possible for these power levels. Additional features: * Over 30 percent compressor flow compared to the factory turbocharger * Various software levels depending on fueling modifications, including stock fueling * Supports 91, 93, 100, and 104 AKI in all configurations * Supports E60-E85 with fueling upgrades (Golf R/S3/TT S platform only) * VSR balanced turbocharger center housing rotating assembly (CHRA) for reliable operation * Oversized cast turbo inlet pipe connects directly to factory or upgraded intake system * Machined turbocharger speed sensor port with included billet block-off plug * Silicone discharge hose with APR EZ-flow stepped lips included (no turbo muffler) * Integrated diverter valve (DV) port * Available in turbo kit only, turbo kit with low- and high-pressure fuel pump, or turbo kit with low- and high-pressure fuel pump and multi-port injection
Not Yet Reviewed
$3,399.95
$3,058.95
—
$4,699.95
Summit Bucks
Edelbrock E-Force Mustang Stage II supercharger upgrade kits contain everything needed to boost your system from 559 hp to 636 hp. Each kit includes a new pulley, drive belt, and air intake system. Take your Mustang to new levels of performance with a Stage II upgrade kit from Edelbrock.
( 1 )
$3,353.95
On Sale
Summit Bucks
Mishimoto air-to-water performance intercooler Power Packs include S55 Performance intercooler, heat exchanger, and charge pipe kit to strengthen weaknesses in the BMW's design. The Power Packs are offered in a choice of 12 BMW-specific color matching options or classic black, so your go-fast parts in the engine bay can now match the exterior beauty of your BMW. Mishimoto's charge pipes feature full-aluminum construction with a cast mid-section and matte black silicone couplers that can handle the boost pressure, unlike the factory plastic that can crack under pressure, or split at the seams, creating a less than ideal situation as you pilot your vehicle. Next, the non-descript box is replaced with a stylish, colorful air-to-water intercooler featuring a bar-and-plate core with increased core volume and a single-pass coolant flow layout for optimal heat transfer. Adding to both these improvements is Mishimoto's larger full-aluminum heat exchanger providing increased external fin surface area and core volume. Additional features and specs: * 12 degree F drop in intake air temperatures and 10 degree F reduction in global intercooler coolant temperatures * Dyno-proven average power gains of 11 WHP and 8 WTQ with peak gains of up to 31 WHP and 10 WTQ on Stage 1 tuned vehicle * Intercooler features unique bar-and-plate, single-pass coolant passage design, and cast aluminum end tanks for optimal flow and cooling capacity * Intercooler core volume increased by 29 percent with 16 percent improved flow * Heat Exchanger features all-aluminum construction with 180 percent increase in fin surface area and 60 percent increase in core volume * Heat exchanger includes optional stone guard for added protection against road debris * Heat exchanger utilizes variable fin pitch for improved flow to DCT cooler * Mishimoto lifetime warranty
Not Yet Reviewed
$2,652.95
—
$2,659.95
$2,069.29
—
$2,393.96
Wagner Tuning performance intercoolers easily replace OEM coolers and provide performance gains, less pressure drop, and lower intake temperatures. Optimized by CAD, most feature bar and plate construction for generally greater heat rejection than many tube and fin designs (models with turbulators offer even greater heat rejection). They are also less likely to be damaged by rocks and debris. Engineered for efficiency and designed to remove bottlenecks, their cast aluminum end tanks were improved further with flow analyses and simulations. Treated with a protective anti-corrosion coating with perfect thermal heat-dissipating characteristics, Wagner Tuning performance intercoolers are a great choice.
Not Yet Reviewed
$3,440.00
PowerMax Performance Diesel turbochargers supply your light-duty diesel with the best components for optimizing power, response, and efficiency. PowerMax turbochargers are quick-spooling, high-flowing turbochargers with the right blend of design features that will upgrade power and torque, while lowering EGTs for select diesel trucks. Whether you own a Ford, Dodge, or GM diesel pickup truck, PowerMax has a ball-bearing turbocharger for you! Turbocharger and installation instructions, as well as other components needed for your specific application are included. Features and benefits of PowerMax turbochargers: * Large bore inducer--allows greater airflow for high performance diesels with increased fuel flow * Advanced design compressor wheels--extremely high-efficiency, backward-curved impellers, which allow for a broad airflow range to match the needs of diesels * Exclusive true angular-contact ball bearings--meaning the turbo spools up to 15 percent faster, is capable of high-thrust loads seen in high performance/high-boost applications, and increases overall turbo efficiency by reducing power consumption by nearly 50 percent over traditional journal bearing designs * Performance enhancing oil restrictor--optimizes oil flow for proper lubrication and cooling, while limiting turbo rotational drag which robs power and efficiency * Divided turbine housing--divider wall within the turbine volute optimizes pulse gas energy, which gives greater response and turbine efficiency during low-end and mid-range operation * Ultra-high pressure/high-efficiency turbine--extracts a maximum of energy from the engine's exhaust. Using GMR235 super alloy, the turbine wheel design is optimized for high exhaust flow, and low weight to reduce moment of inertia assisting in crisp response to changes in engine speed * Turbine outlet connection--designed to fit as a direct drop-in to enhance the ease of upgrading stock turbos * Turbine heat shielding--PowerMax utilizes a heat shield to create "dead air space" insulation barrier to keep high exhaust heat energy in the turbine to be converted to mechanical energy, and away from bearings and oil * Design optimized turbine housing--advanced 3D modeling and computational fluid dynamics are used to optimize the volute shape, and the housing is also equipped with an adjustable wastegate allowing adjustment for optimum boost levels * Oil control and seal--a double-row flinger which drives drain oil away from the gas seal rings virtually eliminates compressor oil sealing problems
( 3 )
$3,371.99
Edelbrock Twin-Force Stage 1-2 Turbo System Upgrade Kits will upgrade your Edelbrock Twin-Force Stage 1 Power Package to a Stage 2 Turbo System by adding driver and passenger turbochargers. Edelbrock's engineers collaborated with Garrett on the design of all new turbos for the 3.5L EcoBoost trucks. These new direct bolt-in turbos incorporate the latest in turbocharger technology, offering a 54 percent increase in airflow over the factory turbos. A 60mm billet compressor wheel produces great improvements in compressor efficiency and flow. The 50mm Inconel turbine wheel and larger .45 A/R stainless steel turbine housing result in a 52 percent increase in turbine flow. The 2.75 in. compressor inlets are 38 percent larger than the factory turbos, complementing Edelbrock's high-flow turbo inlet piping. When combined with Edelbrock's larger Intercooler, air inlet tubes, and high- flow air filter, these turbochargers offer huge increases in power potential for this application.
Not Yet Reviewed
$4,523.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
