Availability
Showing In Stock Items. Show All 6 Items.
APR DTR8868 turbocharger systems are direct replacements for the EA839 3.0L turbo engine. These upgrades include matching software for various vehicles and mods, providing up to 620 hp (571 AWHP) and 422 lbs.-ft. of torque (572 AWT), depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even ethanol on the S4, S5, and SQ5 platforms with fueling upgrades. For dedicated race cars, the turbocharger is designed with plenty of headroom to go even further on your own. The APR Stage 3 software is designed to avoid hard-spiking in the lower RPM band or running on the edge of what the factory rods and pistons should handle. Particular attention was paid toward component protections for exhaust gas temperature (EGT), back pressure safety (EMAP), turbocharger discharge temperatures, and fueling system capabilities. As rising exhaust gas temperatures require more fuel, the system will lower lambda to cool EGT without taxing the injection system with excessive on-times. Secondary protections will limit output for safety. The HPFP software helps increase headroom without over-driving the pressure to the injection system. The need for limiting power under extreme prolonged use (like tracking the vehicle), is greatly reduced, and the optional upgraded HPFP dramatically increases ethanol output. Note: Specific software is required to use this system, and an upgrade from lower stage systems is included for various vehicles. Software compatibility must be checked before purchase as the software installs to your vehicle's factory ECU. Currently, software can only be installed by an authorized APR dealer. Software is available in two formats: for use with the stock HPFP or for use with the APR HPFP. Additional APR DTR8868 turbocharger systems features, items, and specifications include: * Does not require a core and no additional downtime * Designed to bolt to factory location with factory-style connections * German dual ceramic ball bearing center section eliminates failure-prone journal bearing design * Smooth and reliable operation with a better transient response * Upgraded compressor cover with matching A/R * Larger aircraft-grade, 6061 billet aluminum 88mm compressor wheel * Turbine housing cast with high-temperature 310 stainless steel * Turbine A/R matched to nickel-based super-alloy K418 high-flow 54mm turbine wheel * Each rotating group is VSR (vibration sort rig) balanced for reliable operation * Includes complete turbocharger with a calibrated wastegate actuator and diverter valve * All necessary single-install hardware, gaskets, and clamps * Intake system adapter provides maximum flow-through as optional upgrade for factory intake * ECU software upgrade designed for factory engine and remains emissions-compliant * Supports 91, 93, 100, and 104 AKII, and E60-E85 in North America * Supports 95, 98, 104, 108 RON, and E60-E85 everywhere else * Integrated DV (Diverter Valve) port with OEM DV included
Not Yet Reviewed
$3,299.95
Turbosmart TS-2 Performance turbochargers are smaller, lighter, and faster. They were developed to leverage modern materials, design, and manufacturing techniques to create a turbocharger range that meets the demands of both Motorsport and performance enthusiasts alike. Turbosmart TS-2 Series are water and oil cooled turbochargers with lightweight investment cast turbine housings, along with a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know from Turbosmart. The ultra-low rotating mass of their unique bearing and shaft assembly is matched to aggressive compressor aerodynamics, ensuring high levels of performance at lower shaft speeds which is mated with a unique turbine wheel to ensure power at high loads and flow is maintained. The TS-2 Series has taken an engine end-to-end approach, aiming to achieve power through reduced back pressure and high performance turbines. They are available in V-band options, various ARs, and internally or externally wastegated. Choose the one that meets your desire for power. Key features: * Unparalleled transient response * Aggressive aerodynamics with 7+7 splitter wheels * Lightweight 310s stainless steel investment cast turbine housings * Lightweight aluminum compressor covers * CFD driven designed housings for optimal ARs and flow * T14 Inconel turbine wheel for extreme EGT's * VSR speed balanced * Proprietary dual ceramic bearing system * Integrated Iron backplate on center housing
Not Yet Reviewed
$2,229.95
APR DTR6054 turbocharger systems are direct replacements for the EA888 Gen 3 engine. These upgrades include matching software for various vehicles and mods, providing up to 491 hp and 425 lbs.-ft. of torque, depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even ethanol on the Golf R, S3, and TT S platform with fueling upgrades. For dedicated race cars the turbocharger is designed with plenty of headroom to go even further on your own! Designed and developed from the ground up by APR, DTR6054 turbochargers do not require a core and there's no additional downtime. They are built using an aluminum anti-surge compressor cover with appropriate A/R matched to a larger aircraft-grade, 6061 billet aluminum 60mm compressor wheel, a turbine housing cast with high-temperature 310 stainless steel to take the heat and abuse seen on a road course, and a nickel-based superalloy K418 high-flow 54mm turbine wheel. A German dual ceramic ball bearing center section provides smooth and reliable operation with a better transient response, eliminating the factory failure-prone journal bearing design. Each kit includes the complete turbocharger with compressor inlet pipe, compressor outlet hose, T-bolt clamps, gaskets, O-rings, exhaust ring, exhaust V-band, exhaust manifold gasket, studs, bolts, and washers, oil and coolant line O-rings, and APR's ECU upgrades for select vehicles. The upgrade uses your factory electronic wastegate and diverter valve, and connects to your factory exhaust, intake, turbo outlet pipe, and oil and coolant lines. Tested at various road courses, APR's DTR6054 turbocharger systems do not spike torque hard or run on the edge of what the factory rods and pistons have been known to handle, making them as safe on the stock engine as possible for these power levels. Additional features: * Over 30 percent compressor flow compared to the factory turbocharger * Various software levels depending on fueling modifications, including stock fueling * Supports 91, 93, 100, and 104 AKI in all configurations * Supports E60-E85 with fueling upgrades (Golf R/S3/TT S platform only) * VSR balanced turbocharger center housing rotating assembly (CHRA) for reliable operation * Oversized cast turbo inlet pipe connects directly to factory or upgraded intake system * Machined turbocharger speed sensor port with included billet block-off plug * Silicone discharge hose with APR EZ-flow stepped lips included (no turbo muffler) * Integrated diverter valve (DV) port * Available in turbo kit only, turbo kit with low- and high-pressure fuel pump, or turbo kit with low- and high-pressure fuel pump and multi-port injection
Not Yet Reviewed
$2,099.95
—
$3,399.95
Turbosmart TS-1 Performance turbochargers are smaller, lighter, and faster. They were developed to leverage modern materials, design, and manufacturing techniques to create a turbocharger range that meets the demands of both Motorsport and performance enthusiasts alike. Turbosmart TS-1 Series are oil cooled turbochargers with lightweight stainless steel investment cast turbine housings, along with a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you've come to know from Turbosmart. The ultra-low rotating mass of their unique bearing and shaft assembly is matched to aggressive compressor aerodynamics, ensuring high levels of performance at lower shaft speeds which is mated with a unique T14 Inconel turbine wheel to ensure power at high loads and flow is maintained. The TS-1 turbocharger Series has taken a "whole engine" approach to increasing performance, aiming to achieve power through reduced back pressure and high performance turbines. They are available in V-band and various T4 flange options, reverse rotation, and various ARs. Choose the one that meets your desire for power. Features: * Unparalleled transient response * Aggressive aerodynamics with 7+7 splitter wheels * Lightweight 310s stainless steel investment cast turbine housings * Lightweight aluminum compressor covers * CFD driven designed housings for optimal ARs and flow * T14 Inconel turbine wheel for extreme EGT's * VSR speed balanced * Proprietary dual ceramic bearing system * Integrated iron backplate on center housing
Not Yet Reviewed
$2,729.95
Garrett G Series turbochargers are powerful with small frames. With the "G" designating 81 years of Garrett heritage, these units feature the latest Garrett Advancing Motion technology, along with many advanced features and materials, allowing engineers to push the limits of performance. Garrett G Series turbochargers feature: * Compressor aerodynamics is engineered for maximum horsepower * Fully machined ported shroud reduces compressor surge * Fully machined speed sensor and pressure ports * Forged, fully machined CFD-engineered compressor wheel increases airflow for better efficiency * O-ring added between compressor housing and backplate to reduce the possibility of boost pressure leakage * One-piece center housing and backplate increase durability and safety * Turbine wheel constructed of Mar-M super alloy rated for exhaust temperatures up to 1050 degrees C * Stainless steel turbine housings provide the ultimate durability and temperature resistance up to 1050 degrees C * Oil restrictor and water fittings included * Available in non-wastegated and internal wastegate options of standard and reverse rotation configurations
Not Yet Reviewed
$2,700.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
